User manual NIKON ONE TOUCH ZOOM 90-QD

[. . . ] It is available on the reference CD provided with your scanner, where it can be viewed using Adobe Acrobat Reader 4. 0 (available on the reference CD) or later. Installation and viewing instructions are included in the User's Manual. i Notices · No part of the manuals included with this product may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form, by any means, without Nikon's prior written permission. · Nikon reserves the right to change the specifications of the hardware and software described in these manuals at any time and without prior notice. [. . . ] 11-2 After a short pause, the message will be replaced by the opening dialog for the Windows hardware wizard. Click Next. 11-3 A dialog will be displayed asking whether you want to search for a driver or select one from a list. If the CD is not in the CD-ROM drive, insert the disk while holding down the shift key to prevent the Nikon Scan installer from starting automatically. Select CD-ROM drives and click Next. You will need to login as an "Administrator" to register the COOLSCAN IV ED. When you insert the Nikon Scan 3 CD into the CD-ROM drive, the installer Welcome program may start automatically. Click Exit to exit the Welcome program. 35 11-6 The dialog shown at right will be displayed once Windows has located the information it needs to register the scanner. Click Yes. 11-8 The dialog shown at right will be displayed while Windows registers the scanner. 11-9 A dialog will be displayed announcing that registration is complete. Click Finish. 11-10 The dialog shown at right may be displayed; click Yes to restart your computer. After completing device registration, check that the Windows device drivers are installed and functioning normally. Pg. For more information on: 41 Confirming That the Device Driver Is Correctly Installed (Windows 2000) 36 Confirming That the Device Driver Is Correctly Installed (Windows 98SE) sure that your scanner 1 Makecomputer and turned on. is connected to 5 Double-click the listing for your scanner. If your your scanner is not listed as an imaging device, prothe Start menu, select Settings Con2 FromPanel. ceed to "Updating the Device Driver (Windows 98SE). " properties window for 6 Thedisplayed. If a message such as, "This device is not working properly" appears, proceed to "Updating the Device Driver (Windows 2000). " 4 Your Nikon Scanner should be listed as an imaging device. If an "Imaging devices" item appears, click the "+" mark next to the item to view a list of imaging devices. 41 Updating the Device Driver (Windows 2000) the as for my 1 Open 1­3 Device ManagerThatinstructed in 5 Select Search for a suitable driverNext. Steps of "Confirming the Device device (recommended) and click Driver Is Correctly Installed (Windows 2000). " scanner listed de2 If youror "Otherisdevices, "under "Unknown to a vices" or appears next "?" "!" or "x, " double-click the scanner icon to open the properties window for the device. 3 Open the Driver tab and click Update Driver. . . . 6 Inser t(ifthe Nikon Scan 3 CD in a CD-ROM drive the Welcome dialog appears when the CD is inserted in the drive, click Exit and proceed with driver installation). Follow the instructions in steps 11-5 to 11-10 of "Registering the 4000 ED with Windows 2000" or 11-5 to 11-8 of "Registering the COOLSCAN IV ED with Windows 2000" to specify the location of the device driver. a message displayed indicating that 7 When installation isiscomplete, click Finish to driver to 4 The Welcome willthe Upgrade Device Driver Wizard dialog appear. If you are prompted to restart your computer, click Yes to restart Windows. 42 Step 12: Make a Scan Scanning 35 mm Negatives and Positives This step introduces basic scanning procedures. For details of using Nikon Scan to scan images, see the Nikon Scan 3 Reference Manual. 12-1 Nikon Scan can be used to scan images into third-party host applications such as Adobe Photoshop, or it can be used as a "stand-alone" application for scanning images and saving them to disk. To start Nikon Scan from another application, select Nikon Scan from the application's list of "acquire" or "import" sources. If you are using a Macintosh, the Nikon Scan 3. 0 plug-in must first be copied to the Import/ Export folder in the application's plug-ins folder. When using Nikon Scan as a "stand-alone" application: Windows Click the Start button and select Nikon Scan 3. 0 from Programs > Nikon Scan 3. 0. 43 Macintosh Open the folder to which you installed Nikon Scan (the default location is in the path Nikon Software : Nikon Scan 3 on the start-up disk) and double-click the Nikon Scan icon. 12-2 After confirming that the status LED is glowing steadily, open the sliding cover on the front of the scanner and slide a film adapter into the adapter slot as shown below, with the film slot towards the front of the scanner. If you are using the SA-21, be sure that the connectors on the rear of the adapter are fully inserted in the connectors at the rear of the adapter slot (the status LED will blink when the connectors are fully inserted). SA-21 MA-20 (S) Pg. [. . . ] 90, 94 N Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 62 Non-emulsion surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 P Perforations, film . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75, 76, 77 Photoshop LE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]