User manual NIKON SUPER COOLSCAN 4000 ED

[. . . ] En Setup Device Registration (Windows Only) Scanning 35 mm Slides Scanning 35 mm Film Nikon Scan Reference User's Manual Install Nikon Scan scanner driver software The procedure for installing the software differs depending on whether you are using a Windows or Macintosh computer. Windows Macintosh See See 16 21 Scanning Guide Set up the scanner and connect it to your computer Windows users will need to register the scanner with Windows when connecting the scanner for the first time. Registration of the scanner as a new device is necessary only under Windows. Connect the scanner See Register the scanner See 25 29 Insert a film adapter and insert film into the scanner The adapter used depends on the media scanned. [. . . ] Select the file LS40002K. INF and click Open. 37 6 Confirm the file path The dialog shown at right will be displayed. Confirm that the path "\INF\LS4000\Win2000" appears after the drive letter of the CD-ROM drive and click OK. If the Correct Path Is Not Displayed If the correct path is not displayed, repeat steps 4­6 to select the correct path. 7 4000 ED Begin installation of the device drivers Click Next. 8 Click Yes The dialog shown at right will be displayed. Click Yes. 38 The dialog shown at right will be displayed while Windows registers the scanner. 9 Click Finish Click Finish to complete installation. 4000 ED computer 10 Restart the restart the computer. Click Yes to device 11 Confirm that theregistration been correctly registered with the system as described in Confirm scanner has "Confirming Device Registration (Windows 2000 Professional)" ( 40). 39 Confirming Device Registration (Windows 2000 Professional) After registering the scanner, confirm that the device is working normally as described below. 1 2 3 Turn the scanner on Make sure that the scanner is connected and turned on. Open the System Properties dialog From the Start menu, select Settings > Control Panel and double-click the System icon. Display the Device Manager The System Properties dialog will be displayed. Open the Hardware tab and click Device Manager. . . . 4000 ED 4 Confirm that the scanner is listed under "Imaging devices" If "Imaging devices" appears in the Device Manager, click the "+" to its left to view the imaging devices currently registered with Windows. If the Scanner Is Not Listed If your scanner is not listed under "Imaging devices, " proceed to "Updating the Device Driver (Windows 2000 Professional)" ( 42). 40 5 Confirm that the scanner is working properly Double-click the listing for your scanner that appears under "Imaging devices. " The scanner Properties dialog will be displayed. Click the General tab and confirm that "This device is working properly" appears under "Device Status. " If another message is displayed, proceed to "Updating the Device Driver (Windows 2000 Professional)" ( 42). 4000 ED 41 Updating the Device Driver (Windows 2000 Professional) If the scanner is not listed under "Imaging devices" in the Device Manager or the message "This device is working properly" does not appear in the Properties dialog, you will need to reinstall the device driver as detailed below. 1 2 Open the scanner Properties dialog Display the Device Manager as described in steps 1­3 of "Confirming Device Registration (Windows 2000 Professional)" ( 40). If the scanner is listed under "Other devices" or appears next to a "!", "?", or "×", double-click the entry for the scanner to display the scanner Properties dialog. Open the Driver tab and click Update Driver. . . . 4000 ED 3 Click Next When the Upgrade Device Driver Wizard is displayed, click Next. 42 4 Select the search option Select the search option and click Next. 5 Insert the Nikon Scan 3 CD Holding down the shift key to prevent the Welcome program from starting automatically, insert the Nikon Scan 3 CD into the CD-ROM drive. The Welcome Window If the Welcome program starts automatically when you insert the Nikon Scan CD, click Exit to close the Welcome window. 4000 ED 6 7 Reinstall the drivers Reinstall the drivers as described in steps 3­8 of "Registering the Scanner with Windows 2000 Professional" ( 37­38). Click Finish When the wizard displays a message stating that it has found the drivers for your scanner, click Finish to complete installation. If prompted to restart the computer, click Yes. 8 Confirm device registration Confirm that the scanner has been correctly registered with the system as described in "Confirming Device Registration (Windows 2000 Professional)" ( 40­41). 43 Windows Millennium Edition (Me) Registering the Scanner with Windows Me 1 Turn the scanner on The first time the computer detects the scanner, Windows will display the dialog shown at right. After confirming that the Nikon Scan CD is inserted in the CD-ROM drive, select the search option and click Next. Inserting the Nikon Scan CD If the Nikon Scan CD is not in the CD-ROM drive, insert the disk while holding down the shift key to prevent the Welcome program from starting automatically. 4000 ED 2 Select LS4000ME. INF Select LS4000ME. INF in the list of drivers and click OK. "LS4000ME. INF" Several drivers with similar names may be displayed. Be sure to select LS4000ME. INF. The Welcome Window If the Welcome program starts automatically when you insert the Nikon Scan CD, click Exit to close the Welcome window. 44 3 Click Finish Click Finish to complete installation. 4 5 Restart the computer Click Yes to restart the computer. 4000 ED Confirm device registration Confirm that the scanner has been correctly registered with the system as described in "Confirming Device Registration (Windows Me)" ( 46). 45 Confirming Device Registration (Windows Me) After registering the scanner, confirm that the device is working normally as described below. 1 2 3 Turn the scanner on Make sure that the scanner is connected and turned on. Open the System Properties dialog From the Start menu, select Settings > Control Panel and double-click the System icon. Display the Device Manager The System Properties dialog will be displayed. Open the Device Manager tab. 4000 ED 4 Confirm that the scanner is listed under "Imaging Device" If "Imaging Device" appears in the Device Manager, click the "+" to its left to view the imaging devices currently registered with Windows. [. . . ] 25. 1 × 36. 8 mm when scanning 35 mm film in the MA-20 (S) , FH-3 (S) or SF-200 (S) 25. 1 × 38. 0 mm when scanning 35 mm film in the SA-21 or SA-30 18. 6 × 28. 4 mm when scanning APS (IX240) film 3946 × 5782 pixels when scanning 35 mm film in the MA-20 (S), FH-3 (S) or SF-200 (S) 3946 × 5959 pixels when scanning 35 mm film in the SA-21 or SA-30 2916 × 4453 pixels when scanning APS (IX240) film 23. 3 × 36. 0 mm when scanning 35 mm film in the SA-21 or SA-30 24. 0 × 36. 0 mm when scanning 35 mm film in the FH-3 (S) 25. 1 × 36. 8 mm when scanning 35 mm film in the MA-20 (S) or SF-200 (S) 16. 1 × 26. 9 mm when scanning APS (IX240) film 3529 × 5379 pixels when scanning 35 mm film in the SF-200 (S) 3546 × 5782 pixels when scanning 35 mm film in the MA-20 (S) 3654 × 5646 pixels when scanning 35 mm film in the SA-21 or SA-30 3762 × 5646 pixels when scanning 35 mm film in the FH-3 (S) 2525 × 4219 pixels when scanning APS (IX240) film Fixed-film, movable-plane single-pass optical scanning system Red, green, and blue (RGB) LEDs 3964-pixel, linear CCD image sensor Performed by RGB color LEDs Maximum 4000 pixels per inch Aperture Scan range Effective aperture Effective scan range Scanning system Light source Sensor Color separation Optical resolution 144 Analog-to-digital (A/D) conversion 14 bits per color (RGB) Output Full color (8 or 16 bits per color [RGB]) Focus Autofocus, Manual Scanning time Duration of Scanning on processes ICE ­ ­ ROC ­ ­ GEM ­ ­ ­ ­ ­ ­ ­ ­ Preview 15 s 15 s 52 s 52 s 52 s 56 s 56 s 56 s Scan 38 s 1 m 20 s 1 m 00 s 2 m 40 s 2 m 05 s 1 m 35 s 2 m 50 s 2 m 55 s Computer: RAM: OS: Software: Board: Adapter: Input Resolution: Scan Bit Depth: CMS: Film: FMV715GTX6 (Pentium 4 1. 5GHz) 1GB Windows 2000 Nikon Scan 3. 1 IEEE 1394 I/F Board (included in the 4000 ED package) MA-20 (S) Slide Mount Adapter 4000dpi 14bit On Positive Interface IEEE 1394 Power supply AC 100­240 V, 50/60 Hz Maximum power consumption while scanning Not exceeding 20W Power consumption at standby Not exceeding 10W Operating environment · Temperature: +10 ­ +35°C (+50 ­ +95°F) · Humidity: 20­60% Dimensions 93 × 169 × 315 mm/3. 66 × 6. 65 × 12. 40 (W × H × D) Weight Approximately 3 kg/6 lb 11. 1 oz (accessories not included) Installation Vertical*/Horizontal * Vertical installation not possible with optional SF-200 (S) slide feeder Horizontal installation not possible with optional SA-30 film roll adapter 145 COOLSCAN IV ED (LS-40 ED) Film · 35 mm film: Positive and negative film, both color and monochrome, may be used. Film may be scanned in strips of up to six frames or mounted as 35 mm slides using mounts of from 1. 0 to 3. 2 mm in thickness and 49. 0­ 50. 8 mm in width. · APS (IX240) film: APS film cartridges can be scanned with the optional IA-20 (S) adapter for APS (IX240) film. · Prepared slides: Aperture Prepared slides can be scanned using the optional FH-G1 slide holder for the MA-20 (S). 25. 1 × 36. 8 mm when scanning 35 mm film in the MA-20 (S) or FH-3 (S) 25. 1 × 38. 0 mm when scanning 35 mm film in the SA-21 18. 6 × 28. 4 mm when scanning APS (IX240) film 2870 × 4203 pixels when scanning 35 mm film in the MA-20 (S) or FH-3 (S) 2870 × 4332 pixels when scanning 35 mm film in the SA-21 2120 × 3237 pixels when scanning APS (IX240) film 23. 3 × 36. 0 mm when scanning 35 mm film in the SA-21 24. 0 × 36. 0 mm when scanning 35 mm film in the FH-3 (S) 25. 1 × 36. 8 mm when scanning 35 mm film in the MA-20 (S) 16. 1 × 26. 9 mm when scanning APS (IX240) film 2657 × 4104 pixels when scanning 35 mm film in the SA-21 2736 × 4104 pixels when scanning 35 mm film in the FH-3 (S) 2870 × 4203 pixels when scanning 35 mm film in the MA-20 (S) 1836 × 3067 pixels when scanning APS (IX240) film Fixed-film, movable-plane single-pass optical scanning system Red, green, and blue (RGB) LEDs 2870-pixel, linear CCD image sensor Performed by RGB color LEDs Maximum 2900 pixels per inch Scan range Effective aperture Effective scan range Scanning system Light source Sensor Color separation Optical resolution Analog-to-digital (A/D) conversion 12 bits per color (RGB) Output Full color (8 or 16 bits per color [RGB]) Focus Autofocus, Manual 146 Scanning time Duration of Scanning on processes ICE ­ ­ ROC ­ ­ GEM ­ ­ ­ ­ ­ ­ ­ ­ Preview 15 s 15 s 1 m 40 s 1 m 40 s 1 m 40 s 2 m 05 s 2 m 05 s 2 m 05 s Scan 42 s 1 m 40 s 56 s 1 m 40 s 1 m 30 s 1 m 55 s 2 m 40 s 2 m 30 s Computer: RAM: OS: Software: Adapter: Input Resolution: Scan Bit Depth: CMS: Film: FMV715GTX6 (Pentium4 1. 5GHz) 1GB Windows 2000 Nikon Scan 3. 1 MA-20 (S) Slide Mount Adapter 2900dpi 8bit On Positive Interface USB 1. 1 compliant Power supply AC 100­240 V, 50/60 Hz Maximum power consumption while scanning Not exceeding 20W Power consumption at standby Not exceeding 10W Operating environment· Temperature: +10 ­ +35°C (+50 ­ +95°F) · Humidity: 20­60% Dimensions 93 × 169 × 315 mm/3. 66 × 6. 65 × 12. 40 (W × H × D) Weight Approximately 3 kg/6 lb 11. 1 oz (accessories not included) Installation Vertical/Horizontal 147 Adapter Specifications MA-20 (S) SLIDE MOUNT ADAPTER Film Mounted 35 mm slides, 1. 0­3. 2 mm in thickness Dimensions 70 × 49 × 158 mm/2. 77 × 1. 93 × 6. 22 (W × H × D) Weight Approximately 100 g/3. 6 oz Operating Mode Can be used in both vertical and horizontal installations FH-3 STRIP FILM HOLDER Film Dimensions Weight Operating Mode SA-21 STRIP FILM ADAPTER Film 35 mm film of one to six frames (color or monochrome, positive or negative) 262. 0 × 4. 7 × 50. 5 mm/10. 31 × 0. 18 × 1. 99 (W × H × D) Approximately 40 g/1. 43 oz Can be used with the MA-20 (S) slide-mount adapter in both vertical and horizontal installations 35 mm film of two to six frames (color or monochrome, positive or negative) Feed Mechanism Automatic feed with built-in motor Power Source Supplied from scanner Dimensions 80 × 70 × 230 mm/3. 15 × 2. 76 × 9. 06 (W × H × D) Weight Approximately 500 g/1 lb 1. 86 oz Operating Mode Can be used in both vertical and horizontal installations 148 Specifications for Optional Adapters Some optional adapters can be used with both the 4000 ED and COOLSCAN IV ED, while others are exclusively for use with the 4000 ED. [. . . ]