User manual OLYMPUS DS-2200

[. . . ] DIGITAL VOICE RECORDER DS-2200 ONLINE INSTRUCTIONS Thank you for purchasing an Olympus Digital Voice Recorder. Please read these instructions for information about using the product correctly and safely. To ensure successful recordings, we recommend that you test the record function and volume before use. EN Table of Contents Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Auto Backspace review (BACK SPACE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] When you choose OFF, the alarm indicator disappears and finishes with step 12. 38 9, 11 8, 10 12 8 9 10 11 12 12 8, 10 Press the FF or REW button to set the hour. Press the PLAY button to accept the hour. The minute indicator flashes. Press the FF or REW button to set the minute. Press the PLAY button to accept the minute. Alarm Playback Function (ALARM) 4 Press the STOP button to close the menu. An alarm tone will sound at the scheduled time. Press any button while the alarm sounds to play the file you associated with the alarm. 9, 11 To enable alarm sound only To set an alarm without audio playback, set the alarm while an empty folder is selected. · Start setting from step 3 ( P. 38) of "Alarm Playback Function". · When alarm sound goes at the preset time, pressing any button stops the sound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Notes · The alarm playback function can be set for only one file at a time. · The alarm will sound at the scheduled time every day unless the alarm playback setting is cleared. · If you wish to change the file for alarm play, first turn the alarm settings "OFF", then make any desired new alarm settings. · If the recorder is in use at the scheduled time, the alarm will sound after the operation is finished. · The alarm will sound at the scheduled time even if the recorder is set to hold. The recorder begins to play the file associated with the alarm when you press any button. · The alarm playback setting is cleared if the selected file is erased. 39 LCD Contrast Adjustment (CONTRAST) If you find it difficult to read the display information due to lighting, temperature, or other conditions, you can adjust the contrast using this function to easily see the LCD display (display contrast). Display contrast can be adjusted in 12 levels. 4 LCD Contrast Adjustment (CONTRAST) 3, 5 2, 4 6 1 2 3 4 Press and hold the MENU button for 1 second or longer. The menu opens ( P. 53). Press the FF or REW button until "CONTRAST" flashes on the display. Press the PLAY button. The LCD display contrast setup process begins. Press the FF or REW button to set the contrast level. You can adjust the LCD display contrast level from 1 to 12. (Initial setting . . . . . . 6) 3, 5 1 6 2, 4 5 6 Press the PLAY button to complete the setup screen. Press the STOP button to close the menu. 40 Backlight (BACKLIGHT) The recorder display backlight is ON by default. The display will lit for about 10 seconds when a button on the recorder is pressed. The backlight feature can be turned off from the menu. 3, 5 2, 4 6 1 2 3 4 Press and hold the MENU button for 1 second or longer. The menu opens ( P. 53). Press the FF or REW button until "BACKLIGHT" flashes on the display. Backlight (BACKLIGHT) 4 Press the PLAY button. The backlight setup process begins. Press the FF or REW button to choose between ON and OFF. ON : Backlight is enabled. OFF : Backlight is disabled. 3, 5 1 6 2, 4 5 6 Press the PLAY button to complete the setup screen. Press the STOP button to close the menu. 41 Assigning Folder Names (FOLDER NAME) The 5 folders on the recorder (Folder A to Folder E) can be easily renamed. Frequently used names such as "dictation (DICT. )", "meeting (MEETING)" and "schedule (SCHEDULE)" are pre-set in a template. 4 Assigning Folder Names (FOLDER NAME) 3, 5, 7 2, 4 8 1 2 3 4 Press and hold the MENU button for 1 second or longer. The menu opens ( P. 53). Press the FF or REW button until "FOLDER NAME" flashes on the display. Press the PLAY button. The folder name setup process begins. Press the FF or REW button to choose the folder you want to name. 3, 5, 7 1 8 2, 4 5 6 Press the PLAY button to accept the chosen folder. a Current character being entered (a space is highlighted and blinks. ) a Press the FF or REW button to choose characters. The recorder assigns the following buttons to inputting procedures. 42 Recorder buttons that are used to input characters Button PLAY FF REW FOLDER ERASE INDEX MENU Push Press once Press and hold Press once Press and hold Press once Press and hold ------------------Press Press Press Press once and hold once and hold Action To input the selected character and advance the input position. Quickly skips ahead in increments of 5 characters. 4 Assigning Folder Names (FOLDER NAME) Use the two following methods to quickly find characters. 1 When the INDEX button is pressed, the displayed character group (example: Uppercase, lowercase, template, symbols) will change, and you can then press the FF or REW buttons to select characters. [. . . ] Switch to the right folder. 80 Accessories (optional) xD-Picture Cards of 16, 32, 64, 128, 256 and 512 MB:M-XD16/32/64/128/256/512 Olympus CAMEDIA digital camera series xD-Picture Cards can be used. PC Transcription kit: AS-3000 The AS-3000 transcription kit provides you with a PC-footswitch, a headset and DSS Player Pro Transcription Module for easy transcription of DSS recordings. Stereo Microphone: ME50S/ME51S To create stereo recordings in WMA format with clear sound and reduced noise. Noise-Cancellation microphone: ME12 (Dictation microphone) Used to get crisp recordings of your own voice by reducing the effects of ambient noise. [. . . ]