User manual OLYMPUS PPO-E03

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual OLYMPUS PPO-E03. We hope that this OLYMPUS PPO-E03 user guide will be useful to you.


OLYMPUS PPO-E03 : Download the complete user guide (754 Ko)

You may also download the following manuals related to this product:

   OLYMPUS PPO-E03 (650 ko)
   OLYMPUS PPO-E03 (640 ko)
   OLYMPUS PPO-E03 (645 ko)

Manual abstract: user guide OLYMPUS PPO-E03

Detailed instructions for use are in the User's Guide.

[. . . ] This product is the Waterproof Lens Port (PPO-E03) designed exclusively for use with the PT-E series of waterproof case. Underwater manual focus (MF) is possible by attaching the provided gear to the MF ring on the camera lens. Note that this will restrict the rotation range of the MF ring to within 180°. Disclaimer Unauthorized copying of this manual in part or in full, except for personal use, is prohibited. [. . . ] To control manual focus (MF) operation from this product, the provided gear must be attached to the MF ring on the lens. Attach the gear to the MF ring on the lens as instructed in this manual. E-1 1 Name of Parts PPO-E03 main body Silicon O-ring (POL-E101) Front cap Rear cap MF Gear Grease for silicone O-ring Pick for O-ring removal 2 Mounting the PPO-E03 on the Waterproof Case Grease applying surface on O-rings Threaded section O-ring This section describes how to mount this product on the PT-E series case. Before mounting, check that no foreign matter is attached to the O-rings, the port mount thread on the PT-E series case, or the Oring contact surfaces. Apply a thin layer of the provided silicone O-ring grease. O-ring contact surfaces Port mount thread Align the threaded section of the PPO-E03 with the port mount thread on the PT-E series case. Hold the PT-E series case firmly with one hand, hold the main body of the PPO-E03 with your other hand and screw it into the PT-E series by turning the PPO-E03 clockwise. However, be sure to screw it in all the way until there is no gap visible below the threaded section of the PPO-E03. Screw in until there is no gap. E-2 3 Dismounting the PPO-E03 If any water is on the product, wipe it completely away and make sure that the product is dry. Holding the PT-E series case firmly with one hand, loosen the PPO-E03 by turning it about 90 degrees counterclockwise. If the PPO-E03 is attached too tightly to turn, wrap it with a piece of rubber or similar non-slip material. After loosening the PPO-E03, point its lens downward and turn it further counterclockwise until it is separated from the PT-E series case. Be careful not to drop the PPO-E03 or PT-E series case. CAUTION: While dismounting the PPO-E03 from the case, water remaining on the PPO-E03 may splatter on the lens or camera. If this happens, wipe the water off the lens and camera with a dry cloth. Make sure that the port is completely dry before dismounting. E-3 4 Attaching the Gear to the Lens To control the camera lens's manual focus (MF) operation, the provided gear must be attached to the MF ring on the lens. * Note that this will restrict the rotation range of the MF ring to within 180°. Turn the lock dial counterclockwise to release the lock and open the gear. Hinge Open Lock dial Gear Open the gear all the way, place it on the lens and adjust the rotation direction of the gear. At this time, bring the gear to the left of the hinge as shown in the illustration. Align the hinge with the index. Set the front-rear direction of the gear by aligning the edge of the hinge with the end of the rubber section on the lens' MF ring. After positioning the gear, place it against the lens' MF ring, while taking care not to displace it. Turn the gear's lock dial all the way clockwise to lock it so that the gear will not open. Push the gear with a finger to place the gear against the lens. Turn the lock dial to lock the zoom gear. CAUTION: ' E-4 5 Loading the Camera and Lens After attaching the gear to the camera's lens, insert the camera and lens into the PT-E series case on which the PPO-E03 is mounted. Screw the camera table provided with the PT-E series case firmly into the bottom of the camera. Remove the eyecup from the camera's viewfinder. [. . . ] Description Grease for O-rings This product uses the following consumable items. Silicon O-rings Grease for silicone O-ring Shinjuku Monolith, 3-1 Nishi Shinjuku 2-chome, Shinjuku-ku, Tokyo, Japan : Wendenstrasse 14-18, 20097 Hamburg, Germany Tel: +49 40-23 77 3-0 Fax: +49 40-23 07 61 Goods delivery : Bredowstrasse 20, 22113 Hamburg, Germany Letters : Postfach 10 49 08, 20034 Hamburg, Germany Premises Two Corporate Center Drive, Po Box 9058, Melville, NY 11747-9058, U. S. A. 631-844-5000 European Technical Customer Support: Please visit our homepage http://www. olympus-europa. com or call our TOLL FREE NUMBER* : 00800 - 67 10 83 00 for Austria, Belgium, Denmark, Finland, France, Germany, Italy, Luxemburg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, United Kingdom *Please note that some (mobile) phone services/ provider do not permit access or request an additional prefix to +800 numbers. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE OLYMPUS PPO-E03




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual OLYMPUS PPO-E03 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.