Detailed instructions for use are in the User's Guide.
[. . . ] Contents
CD Receiver
Introduction 2
CR-505
Instruction Manual
Connections
11
Getting Started
16
CD/MP3 Playback
20
Radio
24
Using Other Functions
Thank you for purchasing an Onkyo CD Receiver. Please read this manual thoroughly before making connections and turning on the power. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new CD Receiver. Please retain this manual for future reference.
27
Appendix
31
En
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
WARNING
RISK OF ELECTRIC SHOCK DO NOT OPEN
AVIS
RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] Notes: · If the clock has not been set correctly, specify another FM station and try again, or set the clock manually (see page 18). · If you don't want the clock to be calibrated automatically, you can turn off the ACCUCLOCK function (see the next section).
17
Powering Up and Setting the Clock--Continued
4 Press the [ENTER] button.
The time flashes.
STANDBY/ ON
CLOCK CALL
CLOCK CALL TIMER
1 4
2 5 8
--/---
3
TIMER
6 9
5 Use the Up/Down [
the time.
]/[ ] buttons to set
7
10/0
CLEAR
ENTER
DISPLAY MODE
ENTER
SLEEP
REPEAT
MUTING
INPUT
DIRECT
6 Press the [ENTER] button to set the clock.
"ADJUSTED" appears on the display.
CD
MD
Setting the Clock Manually
For European models: If you cannot set the clock by using the ACCUCLOCK function, you can set it manually. In this case, the ACCUCLOCK function will not automatically calibrate the clock each day.
Displaying the Date & Time
1 Press the [CLOCK CALL] button.
The date and time appear on the display. Press the [CLOCK CALL] button again to return to the previous display.
VOLUME
1 Press the [TIMER] button repeatedly until
"CLOCK" appears.
MIN STANDBY / ON PHONES INPUT MENU DIRECT BASS TREBLE PRESET MAX
PUSH TO ENTER
Only for European models: Press the [ENTER] button and use the Up/Down [ ]/ [ ] buttons to select "MANUAL ADJ. "
STANDBY/ON
Displaying the Time in Standby Mode
You can set the CR-505 so that the time is displayed while the CR-505 is in Standby mode.
2 Press the [ENTER] button.
The day of the week flashes.
1 With the CR-505 turned on, press and hold
the CR-505's [STANDBY/ON] button for more than 2 seconds.
To turn off the time display, repeat this procedure. Note: Setting the CR-505 to display the time will slightly increase the power consumption in Standby mode.
3 Use the Up/Down [
a day.
]/[ ] buttons to select
18
Using the CR-505
VOLUME control
VOLUME
Adjusting the Volume
1 To adjust the volume, use the [VOLUME]
control, or the remote controller's VOLUME [ ]/[ ] buttons.
MAX
MIN STANDBY / ON PHONES INPUT MENU DIRECT BASS TREBLE PRESET
Turn the [VOLUME] control clockwise to increase the volume; counterclockwise to decrease it.
PUSH TO ENTER
Using Headphones
INPUT
You can connect a pair of stereo headphones to the CR505's PHONES jack for private listening, as shown.
STANDBY/ ON
CLOCK CALL
1 4
2 5 8
--/---
3
TIMER
6 9
7
10/0
CLEAR
ENTER
DISPLAY MODE
SLEEP
REPEAT
VOLUME
UP
STANDBY / ON PHONES INPUT MENU
INPUT
/
MUTING
INPUT
VOLUME
DIRECT CD
DOWN
MD
TAPE
Note: Always turn down the volume before connecting your headphones.
RC-580S
Selecting Sound Sources
1 Use the [INPUT] button, or the remote controller's INPUT [ ]/[ ] buttons to select one of the following sound sources: CD, FM or AM, TAPE, MD, LINE.
The currently selected source is shown on the display.
2 If you selected CD, see "Playing CDs" on
page 20.
If you selected AM or FM, see "Using the Radio" on page 24. If you selected TAPE, MD, or LINE, start playback on the relevant component.
19
Playing CDs
I To Fast Forward or Fast Reverse (remote controller only)
VOLUME
MIN STANDBY / ON PHONES INPUT MENU DIRECT BASS TREBLE PRESET
MAX
PUSH TO ENTER
During playback or while playback is paused, press and hold the [ ] button to fast forward, or the [ ] button to fast reverse. For MP3, fast reverse only works within the MP3 track that is currently playing. If you press the button for more than four seconds, the fast forward or fast reverse speed increases.
/ Stop Play/
CLOCK CALL
I To Select Tracks
Pause
STANDBY/ ON
1
2 5 8
--/---
3
TIMER
Number buttons
4
6 9
7
10/0
CLEAR
ENTER
DISPLAY MODE
--/--REPEAT
SLEEP
MUTING
INPUT
CD operation buttons
CD MD
DIRECT
TAPE
On the CR-505: Turn the [ / ] control to select a track for playback. If you select a track while playback is stopped, press the [/ ] control to start playback. On the remote controller: Press the [ ] button to select the next track, or the [ ] button to select the previous track. If you press the [ ] button during playback or while playback is paused, the beginning of the current track is selected. If you select a track while playback is stopped, press the Play [ ] button to start playback. Note: With CDs and MP3 discs that contain many tracks, playback may take a while to start.
Playing CDs
Selecting Tracks by Number
You can use the number buttons to select specific tracks.
Label side
1 Press the [
] button to open the disc tray, put the CD on the tray with the label-side facing up, and press the [ ] button again to close the tray.
1 Use the number buttons to enter a track
number. Playback starts automatically.
For MP3 disc, select the serial number assigned to the track. To enter a track number smaller than or equal to 10, press each number button. To enter a track number greater than or equal to 100, press [--/---] twice. For example, to enter tranck number 123, press [--/---] twice, [1], [2] and [3].
Be sure to put 8 cm discs in the center of the tray.
2 Press the Play [
back. I To Stop Playback
] button to start playindicator appears on the
Playback starts and the Play display. · Press the Stop [ ] button.
I To Pause Playback
· Press the Play/Pause [ / ] button on the CR-505 or Pause [ ] button on the remote controller. · To resume playback, press the Play/Pause [ / ] button on the CR-505 or Play [ ] button on the remote controller.
20
Playing CDs--Continued
I MP3 Disc
STANDBY/ ON
CLOCK CALL
1 4
2 5 8
--/---
3
TIMER
Elapsed track time: The length of time that the current track has been playing (default display).
FOLDER MP3 TRACK
6 9
7
10/0
CLEAR
ENTER
DISPLAY MODE
DISPLAY
SLEEP
REPEAT
MUTING
INPUT
Track name: Name of the current track.
MP3 TRACK NAME
DIRECT
Displaying Information
This section explains how to display various information, including the remaining track time, remaining disc time, and ID3 tag for MP3 tracks.
Folder name: Name of the current folder.
MP3 FOLDER NAME
1 During playback, press the [DISPLAY] button repeatedly to cycle through the following options. I Audio CD
Elapsed track time: The length of time that the current track has been playing (default display).
CD TRACK
Title name: Title of the current track (if ID3 tag present).
MP3 NAME
Remaining track time: The amount of time remaining for the current track (REMAIN indicator appears).
CD TRACK REMAIN
Notes: · To display the disc name, while playback is stopped, press the [DISPLAY] button. · If a track or folder name contains a character that cannot be displayed, it will be displayed as "*. " · If the number of folders in a MP3 disc exceeds 99, it will be displayed as "- -. "
Remaining disc time: The amount of time remaining for the entire disc (REMAIN and TOTAL indicators appear).
CD TRACK TOTAL REMAIN
21
Various Playback
VOLUME
STANDBY/ ON
CLOCK CALL
1
2 5 8
--/---
3
TIMER
Number buttons
4
6 9
MIN
MAX
7
10/0
CLEAR
ENTER
DISPLAY MODE
MODE
SLEEP
REPEAT
CLEAR ENTER --/--REPEAT
STANDBY / ON
PHONES
INPUT
MENU
DIRECT
BASS
TREBLE
PRESET
PUSH TO ENTER
MENU
/
Play/
Pause
MUTING
INPUT
Random Playback
DIRECT CD MD
With the Random function you can play tracks in random order.
TAPE
1 While stopped, press the remote controlRC-580S
ler's [MODE] button repeatedly to display RANDOM indicator.
Repeat Playback
With the Repeat function you can play a track, a folder or a disc repeatedly.
2 Press the Play [
playback.
] button to start random
All tracks are played in random order.
3 To cancel random playback, stop playback, and then press the [MODE] button repeatedly until the RANDOM indicator disappears.
Note: When carrying out operations on the CR-505, press the [MENU] button repeatedly to select the RANDOM mode, and then press the Play/Pause [ / ] button to start random playback.
1 During playback, press the remote controller's [REPEAT] button repeatedly to select repeat mode.
The REPEAT indicator lights up. [. . . ] Installing an outdoor antenna is a specialist's job, so contact your nearest dealer for advice (page 13). The power cord must be plugged into a wall outlet a few times each month in order to preserve the presets (page 4). Install an outdoor FM antenna (page 13), change the position or direction of your outdoor FM antenna, and keep it away from fluorescent lights. Remove the disc and leave the CR-505 turned on for several hours until the condensation has evaporated. [. . . ]