User manual PANASONIC CZKPU3A

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PANASONIC CZKPU3A. We hope that this PANASONIC CZKPU3A user guide will be useful to you.


PANASONIC CZKPU3A : Download the complete user guide (1517 Ko)

Manual abstract: user guide PANASONIC CZKPU3A

Detailed instructions for use are in the User's Guide.

[. . . ] Specifications Operating Instructions Panel for Cassette (ECONAVI type) Model Name Unit Dimensions Net Weight Temperature / Humidity Range Power Source CZ-KPU3A (Width) 950mm × (Depth) 950mm × (High) 33. 5mm 5 kg 0°C to 40°C / 20% to 80% (Indoor use only) DC16 V (Supplied from indoor unit) Precautions for Use Installation  This optional of must be installed properly by qualified installation technicians in accordance with the Installation Instructions provided with the unit. Information for Users on Collection and Disposal of Old Equipment and Used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC. By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. [. . . ] ● When operating the multiple indoor units, the effect of energy saving will be decreased according to the room condition. ● As for the setting method of the ECONAVI function, refer to the Operating Instructions of the remote controller. When taking advantage of the external device interlock function, one of the output of Human Detection Sensor, output of thermostat ON or output of operation signal can be selected and it is possible to interlock with the external device. Maintenance Indoor Unit (e. g. Type U2) If the human detection sensor or floor temperature sensor becomes dirty, wipe off with a dry soft cloth. In case of heavy dirt, mix a tiny amount of neutral detergent with water and soak it into a soft cloth, squeeze well and gently wipe off the dirt. Then, wipe with a soft dry cloth. In case of more physical human activity  Contents of Control ● Interlock with the output of Human Detection Sensor output (No interlock with the alarm. ) Human presence → When human absence detected: Set the operation of external device to OFF. The time change of "Absence detection time setting" can change timing of operation OFF. Human absence → When human presence detected: Set the operation of external device to ON. ● Interlock with human detection sensor output (Interlock with air conditioner. ) When the indoor unit is operated: Operation of external device is switched ON. When the indoor unit is stopped: Operation of external device is switched OFF. ● Interlock with thermostat output When the thermostat is switched ON: Operation of external device is switched ON. When the thermostat is switched OFF: Operation of external device is switched OFF. WARNING  For safety, be sure to turn the air conditioner off and disconnect the power before cleaning. (Otherwise, electric shock or injury may result because the fan is rotating at high speed. )  Do not pour water on the indoor unit. (This may damage the internal components and cause an electric shock hazard. ) • In Cooling / Dry Mode: When in high humid, operates at set temperature. When in low humid, operates at higher temperature than the set temperature. Operates at lower temperature than the set temperature. • In Heating Mode: In case of less physical human activity Air outlet Air intake CAUTION  Never use solvents or harsh chemicals. (This may cause deformation or change in colour. )  Some metal edges and fins are sharp. (Injury may result. )  Use a firm stool or ladder when cleaning an indoor unit installed in high locations.  The internal coil and other components of the outdoor unit must be cleaned periodically. • Consult your dealer or service center. • In Cooling / Dry Mode: • In Heating Mode: Operates at higher temperature than the set temperature. When in high humid, operates at lower temperature than the set temperature. NOTE ● The external output signal from the air conditioner is supplied for the purpose of controlling the external devices. If the air conditioner does not operate, take measures that the movement of external connecting devices can transfer to the safety zone in advance. [. . . ] ● Indirect Airflow might be invalid by individual air flow direction Remote controller fixed setting. → Set the ECONAVI function to OFF by remote controller and consult at the shop you purchased. → Set the indoor unit to temporarily operate and check the display. → Set to the operation mode temporarily excepting air flow and check the display. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PANASONIC CZKPU3A




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PANASONIC CZKPU3A will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.