User manual PANASONIC LUMIX DMC-FZ35

[. . . ] Basic Operating Instructions Digital Camera Model No. DMC-FZ35 Before connecting, operating or adjusting this product, please read the instructions completely. Please also refer to Operating Instructions (PDF format) recorded on the CD-ROM containing the Operating Instructions (supplied). You can learn about advanced operation methods and check the Troubleshooting. For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www. panasonic. com/contactinfo P VQT2G40 Dear Customer, Thank you for choosing Panasonic!You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we're sure it will bring you and your family years of enjoyment. [. . . ] 235 min (By CIPA standard in program AE Mode) 14 VQT2G40 (ENG) Preparation Recording conditions by CIPA standard · CIPA is an abbreviation of [Camera & Imaging Products Association]. · Temperature: 23 oC (73. 4 oF)/Humidity: 50% when LCD monitor is on. ¢ · Using a Panasonic SD Memory Card (32 MB). (When the optical image stabilizer function is set to [AUTO]. ) · Recording once every 30 seconds with full flash every second recording. · Rotating the zoom lever from Tele to Wide or vice versa in every recording. · Turning the camera off every 10 recordings and leaving it until the temperature of the battery decreases. ¢ The number of recordable pictures decreases in Auto Power LCD Mode and Power LCD Mode. The number of recordable pictures varies depending on the recording interval time. If the recording interval time becomes longer, the number of recordable pictures decreases. When recording once every 2 minutes, the number of recordable pictures decreases to about 117. ] Recording motion pictures (When using the LCD monitor/Viewfinder) [AVCHD Lite] [MOTION JPEG] (Recording with picture quality (Recording with picture quality set to [SH]([ ])) set to [HD]([ ])) Continuous recordable time (motion pictures) Actual recordable time (motion pictures) Approx. 80 min¢ · These are standard times taken at a temperature of 23 oC (73. 4 oF) and a humidity of 50%. · The time available for recording varies depending on the environment, the interval between recordings, and the manner of use. · Actual recordable time is the time available for recording when repeating actions such as switching the power supply [ON] / [OFF], starting/stopping recording, zoom operation etc. ¢ Motion picture recorded continuously in [MOTION JPEG] is up to 2 GB. Only the maximum recordable time for 2 GB is displayed on the screen. Playback (When using the LCD monitor/Viewfinder) Playback time Approx. 480 min The number of recordable pictures and playback time will vary depending on the operating conditions and storing condition of the battery. (ENG) VQT2G40 15 Preparation Inserting and Removing the Card (optional)/the Battery · Check that this unit is turned off. · We recommend using a Panasonic card. Slide the card/battery door to open it. · Always use genuine Panasonic batteries · If you use other batteries, we cannot guarantee the quality of this product. (CGR-S006A). Battery: Insert until it is locked by the lever A being careful about the direction you insert it. Card: Push it fully until it clicks being careful about the direction you insert it. To remove the card, push the card until it clicks, then pull the card out upright. B: Do not touch the connection terminals of the card. · The card may be damaged if it is not fully inserted. B 1:Close the card/battery door. 2:Slide the card/battery door to the end and then close it firmly. · If the card/battery door cannot be completely closed, remove the card, check its direction and then insert it again. 16 VQT2G40 (ENG) Preparation Setting Date/Time (Clock Set) · The clock is not set when the camera is shipped. Turn the camera on. · The [PLEASE SET THE CLOCK] message appears. (This message does not appear in [PLAYBACK] Mode. ) A [MENU/SET] button B Cursor buttons Press [MENU/SET]. Press 2/1 to select the items (year, month, day, hour, minute, display sequence or time display format), and press 3/4 to set. , : Cancel without setting the clock. Press [MENU/SET] to set. · After completing the clock settings, turn the camera off. Then turn the camera back on, switch to Recording Mode, and check that the display reflects the settings that were performed. · When [MENU/SET] has been pressed to complete the settings without the clock having been set, set the clock correctly by following the "Changing the clock setting" procedure below. Changing the clock setting Select [CLOCK SET] in the [REC] or [SETUP] menu, and press 1. [. . . ] Include it with your proof of purchase, and ship your camera to the address below. Reason for requesting service: (USA and Puerto Rico Only) Mail this completed form and your Proof of Purchase along with your unit to: Panasonic Services Company Customer Servicenter Suite B 4900 George McVay Drive McAllen, TX 78503 36 VQT2G40 (ENG) Others Limited Warranty PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Way, Secaucus, New Jersey 07094 Panasonic Digital Still Camera Limited Warranty Limited Warranty Coverage If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company (referred to as "the warrantor") will, for the length of the period indicated on the chart below, which starts with the date of original purchase ("warranty period"), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or refurbished product. The decision to repair or replace will be made by the warrantor. PRODUCT OR PART NAME DIGITAL STILL CAMERA (EXCEPT ITEMS LISTED BELOW) PARTS 1 (ONE) YEAR LABOR 1 (ONE) YEAR CCD RECHARGEABLE BATTERY PACK (IN EXCHANGE FOR DEFECTIVE BATTERY PACK) 6 (SIX) MONTHS 90 (NINETY) DAYS 90 (NINETY) DAYS NOT APPLICABLE SD MEMORY CARD (IN EXCHANGE FOR DEFECTIVE SD CARD) 90 (NINETY) DAYS NOT APPLICABLE During the "Labor" warranty period there will be no charge for labor. During the "Parts" warranty period, there will be no charge for parts. This warranty only applies to products purchased and serviced in the United States or Puerto Rico. [. . . ]