User manual PANASONIC ES7101

[. . . ] Your Panasonic WET/DRY shaver requires a little time to get used to because your skin and beard need about a month to adjust to any new shaving method. Using the shaver Caution - The outer foil is very thin and can be damaged if not used correctly. Charging the shaver · Do not use any power cord or AC adaptor (RE7-0) other than one specifically designed for this model. [. . . ] 1 shaves of minutes each. glows. blinks once every second. 10 minutes after charging is completed blinks once every seconds. GB 5 English Airborne Acoustical Noise: In shaving mode: 67 (dB (A) re 1 pW) In trimmer mode: 67 (dB (A) re 1 pW) 1 Insert the appliance plug into the shaver. into a household 2 Use Using the shaver LED display when the battery capacity is low English 90° blinks. Clean Cleaning the shaver switch 1 Depress theand 2 Hold the shaver lock button as illustrated slide the OFF/ON switch upwards. Wipe off any drops of water with a dry cloth. 6 3 · Start out shaving by applying gentle pressure to your face. Stretch your skin with your free hand and move the shaver back and forth in the direction of your beard. You may gently increase the amount of pressure as your skin becomes accustomed to this shaver. Place at a right angle to your skin and move downwards to trim your sideburns. 5 GB 6 1 Cleaning with the brush 1. Press the foil frame release buttons and lift the outer foil section upwards. Clean the inner blades using the short brush by moving it in direction (A). Clean the system outer foil, the shaver body and the trimmer using the long (A) (B) brush. · Do not move the short brush in direction (B) as it will damage the inner blades and affect their sharpness. · Do not use the short brush to clean the outer foils. Replacing the inner blades 1. Press the foil frame release buttons and lift the outer foil section upwards as illustrated. 1 . · Do not touch the edges (metal parts) of the inner blades to prevent injury to your hand. Insert the inner blades one at a time until they click as illustrated. 23 Replacement parts Replacement parts are available at your dealer or Service Center. Replacement parts for ES7101 System outer foil and inner blades: WES901 System outer foil: WES906 Inner blades: WES9085 Replacing the system outer foil and the inner blades system outer foil inner blade once every year once every two years Removing the built-in rechargeable batteries Remove the built-in rechargeable batteries before disposing of the shaver. Please make sure that the batteries are disposed of at an officially designated location if there is one. Attach the outer foil section to the shaver. Replacing the system outer foil 8 1. Press the system outer foil release buttons and lift the system outer foil upwards as illustrated. [. . . ] [Information on Disposal in other Countries outside the European Union] These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. Note for the battery symbol (bottom two symbol examples): This symbol might be used in combination with a chemical symbol. [. . . ]