User manual PANASONIC KV-S7075C

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PANASONIC KV-S7075C. We hope that this PANASONIC KV-S7075C user guide will be useful to you.


PANASONIC KV-S7075C : Download the complete user guide (2207 Ko)

You may also download the following manuals related to this product:

   PANASONIC KV-S7075C (1508 ko)
   PANASONIC KV-S7075C (1508 ko)
   PANASONIC KV-S7075C (1452 ko)

Manual abstract: user guide PANASONIC KV-S7075C

Detailed instructions for use are in the User's Guide.

[. . . ] Operating Manual High Speed Color Scanner Model No. KV-S7075C These instructions contain information on operating the scanner. Before reading these instructions, please read the installation manual enclosed with this unit. Please carefully read these instructions and the enclosed installation manual. Keep all documentation in a safe place for future reference. Introduction Thank you for purchasing a Panasonic High Speed Color Scanner. About the documentation The scanner documentation consists of 2 manuals: the Installation Manual and the Operating Manual. [. . . ] [AUTO]: Auto feeding [MANUAL]: Manual feeding When manually feeding a document, feed the document 1 page at a time. When scanning important documents or bound documents, feed them manually. [AUTO] Manual feed selector [MANUAL] Manual feed selector 2 Documents that have been stapled together or stacked together (as in a file folder) will need to be separated. 3 To flatten the documents, hold firmly and pull them apart as shown in the illustration. Repeat these steps as necessary. 1 2 3 3 16 Carefully align the documents. Loading Documents on the ADF 4 Adjust the document guides slightly larger than the actual size of the documents. Document guide 5 When using long paper, pull out the hopper extension tray from the hopper. Then raise and adjust the exit stopper to the position a little longer than the actual length of the document. Hopper Hopper extension tray Exit stopper 17 Loading Documents on the ADF 6 Place the documents on the hopper Portrait with the side to be scanned facing up. Then push them in the direction of the arrow until they stop. The amount of documents should not exceed the limit mark on the document guide. Fill indicator (Limit mark) Landscape 18 Loading Documents on the ADF 7 Adjust the document guide to the size of the document to be scanned. Adjust the exit stopper to the size of the document to be output. When scanning the document with the length between 420 mm (A3 size) or 432 mm (17 in. ) and 2540 mm (100 in. ) close the exit stopper. Document guide Exit stopper 8 Open your scanning application*1 and scan the documents. *1 The software RTIV and QuickScan Pro demo, included with the scanner, can be used for scanning the documents. 19 Loading Documents on the ADF Scanning documents with pages of different sizes For conditions when scanning documents with mixed page sizes, see "For documents with mixed page sizes and thicknesses" (page 15). When scanning different size documents, scanned sheets may need to be reordered for optimum performance. 1 Set the manual feed selector to [AUTO]. [AUTO] Manual feed selector 2 Documents that have been stapled together or stacked together (as in a file folder) will need to be separated. 3 To flatten the documents, hold firmly and pull them apart as shown in the illustration. Repeat these steps as necessary. 1 2 3 3 Unlock the document guide. Slide the document guides selector in the direction shown in the illustration until the (1) and (2) marks are aligned to unlock the document guide. Document guides selector 1 2 20 Loading Documents on the ADF 4 Align the document pages along one side. 2 2 2 2 5 When using long paper, pull out the hopper extension tray from the hopper. Then raise and adjust the exit stopper to the position a little longer than the actual length of the document. Hopper Hopper extension tray Exit stopper 6 Align the document position so that the center of the smallest sheet will be fed to the center of the paper slot. If the document is not properly aligned, the pages will not be fed correctly. The amount of documents should not exceed the limit mark on the document guide. Depending on the types of paper, the document may not be fed smoothly. In such case, reduce the number of sheets of the document. Fill indicator (Limit mark) Document guide 21 Loading Documents on the ADF 7 Remove the document and lock the document guide. Slide the document guides selector in the direction shown in the illustration until the (1) and (2) marks are aligned to lock the document guide. Document guides selector 1 2 8 9 Place the document on the hopper again and adjust the document guide according to the size of the document to be scanned. Make sure to align the document pages along one side. Make sure that the center of the smallest sheet of the document will be fed to the center of the paper slot. Open your scanning application*1 and scan the documents. *1 The software RTIV and QuickScan Pro demo, included with the scanner, can be used for scanning the documents. 22 Loading Documents on the ADF Adjusting the left and right document guides to their original position 1 Unlock the document guide. Slide the document guides selector in the direction shown in the illustration until the (1) and (2) marks are aligned to unlock the document guide. Document guides selector 1 2 2 3 Completely spread apart the document guides. Document guides selector Lock the document guide. Slide the document guides selector in the direction shown in the illustration until the (1) and (2) marks are aligned to lock the document guide. 1 2 23 Loading Documents on the Flatbed One sheet or an entire book document can be scanned on the document glass. Scanning documents in this way is known as "scanning with the flatbed". Caution Do not place printed materials containing magnetic ink characters or magnetic strip cards on the flatbed. Magnets are located in the flatbed cover (flatbed sheet) and may damage data stored on printed materials and cards. When scanning with the flatbed 1 2 Raise the hopper tray. Document cover Open the document cover. Hopper tray 3 Place the scanning side of the document face down on top of the flatbed glass towards the upper left corner. If the document is bent or folded, straighten it. Standard mark Document 24 Loading Documents on the Flatbed 4 5 Match the shorter side of the document with the left edge of the flatbed glass. Standard mark Longer side Match the longer side of the document with the standard mark. [. . . ] The ADF glass, reference plate, flatbed glass and flatbed sheet are dirty. It is caused by printing pattern of the document and the congeniality of the scanning resolution. Remedy Adjust the document guides properly to the size of the document to be scanned. (See page 37 and page 40. ) Clean the ADF glass, reference plate, flatbed glass and flatbed sheet. Clean the ADF glass, reference plate, flatbed glass and flatbed sheet. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PANASONIC KV-S7075C




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PANASONIC KV-S7075C will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.