User manual PANASONIC KX-HN6001E

[. . . ] System Setup Guide Home Network System HUB Model No. KX-HNB600E Thank you for purchasing a Panasonic product. This document explains how to configure the hub and access it using a mobile device. For details about how to use the system, refer to the User’s Guide (page 18). Please read this document before using the unit and save it for future reference. [. . . ] Insert the telephone line cord into the LINE jack and a telephone line jack until you hear a click. *1 DSL/ADSL service users only: Connect your DSL/ADSL filter (not supplied). *1 Outdoor Camera (KX-HNC600) or Indoor Camera (KX-HNC200) users only: Remove the label covering the card slot and then insert the microSD card (not supplied) into the slot with the notched corner (1) facing upwards (2) until it clicks into place. This step is only necessary if you want to use the landline phone features. For details about the landline phone features, refer to the User’s Guide (page 18). 4 3 4 1 5 *1 2 Note: R Use only the supplied Panasonic AC adaptor PNLV236E. R A microSD card (not supplied) is required to record images from cameras. R To remove the microSD card, push in the microSD card and then remove it. 6 2 1 Note about power connections AC adaptor connection R The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use. ) R The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected. 12 Helpline Tel. 0330 3331112 Ireland 01 4475228 PNQX7276YA_HNB600E_(en_en)_1220_ver. 200. pdf 12 2017/01/12 2:40:54 Setup Power failure R The hub will not work during a power failure. R The hub’s telephone features will not work during a power failure. We recommend connecting a corded-type telephone that does not use an AC adaptor to your telephone line. Compatible mobile devices iPhone 4 or later, iPad, or iPad mini (iOS 6. 0 or later) or an Android™ device (Android 4. 0 or later) Note: R The [Home Network] app may not function properly depending on the system environment, such as the model of your mobile device, peripherals connected to your mobile device, and the apps installed on your mobile device. R The following Android devices are not compatible with the [Home Network] app. – Android devices that are not supported by Google Play – Android devices with limited hardware features (Bluetooth, Wi-Fi, and microphone support are required. ) Wi-Fi® settings After you have connected your hub, here is what you will need to do in order to access the system from your mobile device. Each procedure is explained in this chapter. 1 2 Download Download the [Home Network] app to your mobile device. Initial setup Use the [Home Network] app to configure the hub to connect to your wireless router, and then register your mobile device to the hub. Initial setup Confirm the following before you begin. – Make sure you have installed the [Home Network] app on your mobile device – Make sure the hub and your wireless router are turned on and the hub’s LED indicator is lit in yellow – Make sure the hub is located within range of your wireless router – Make sure your mobile device is connected to your wireless router – Make sure your mobile device can connect to the Internet – Make sure you know the network name (SSID) and password assigned to your wireless router Downloading the [Home Network] app Download information is available at the web page listed below. www. panasonic. net/pcc/support/tel/ homenetwork/ Initial setup for iPhone, iPad 1 Start the [Home Network] app. R If prompted, follow the on-screen instructions and select the appropriate region/country. 0330 3331112 Ireland 01 4475228 13 PNQX7276YA_HNB600E_(en_en)_1220_ver. 200. pdf 13 2017/01/12 2:40:54 Setup 4 Change your mobile device’s Wi-Fi setting temporarily so that it connects to the hub directly. R Open your mobile device’s [Settings] app, tap [Wi-Fi], select “KX-HNB600_Panasonic”, enter “00000000” as the password, and then tap [Join]. R If more than 1 item named “KX-HNB600_Panasonic” is displayed, wait approx. If necessary, enter the password required to connect to your wireless router and then tap [Next]. R If prompted, follow the on-screen instructions and connect your mobile device to your wireless router, start the app again, and then tap [Add This Mobile Device]. R If you enter the wrong Wi-Fi password, [Setup failed. ] is displayed and the hub’s LED indicator lights. [. . . ] Wrap up the telephone line cord as shown to prevent the cord from being pinched. 2 Screws 3 83 mm 4 To telephone line jack Removing the wall mounting adaptor While pushing the release levers (A) away from the centre of the wall mounting adaptor, slide the adaptor down (B). A A 1 2 3 4 B 20 Helpline Tel. 0330 3331112 Ireland 01 4475228 PNQX7276YA_HNB600E_(en_en)_1220_ver. 200. pdf 20 2017/01/12 2:40:54 Appendix Specifications R Standards DECT: DECT (Digital Enhanced Cordless Telecommunications) GAP (Generic Access Profile) Wi-Fi: IEEE 802. 11b/g/n R Frequency range DECT: 1. 88 GHz – 1. 90 GHz Wi-Fi: 2. 412 GHz – 2. 472 GHz (channels 1 – 13) R RF transmission power DECT: Approx. 83 mW (average power per channel: when 4 cameras, a handset, and another device are registered) 250 mW (max. ) Wi-Fi: 100 mW (max. ) R Encryption WPA2™-PSK (TKIP/AES), WPA™-PSK (TKIP/AES), WEP (128/64 bit) R Simplified configuration WPS (PBC) R Power source 100 – 240 V AC, 50/60 Hz R Power consumption Standby: Approx. [. . . ]