User manual PANASONIC SA-AK47
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PANASONIC SA-AK47. We hope that this PANASONIC SA-AK47 user guide will be useful to you.
Manual abstract: user guide PANASONIC SA-AK47
Detailed instructions for use are in the User's Guide.
[. . . ] Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362. If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local dealer.
Safety precautions
Placement
Set the unit up on an even surface away from direct sunlight, high temperatures, high humidity, and excessive vibration. [. . . ] Turning the speakers off automatically engages the STEREO mode (when listening through headphones, for example). If your speakers have an impedance under 6 Press and hold [A] or [B] until "LOW IMP" lights up on the display. Note that when "LOW IMP" is on, SPEAKERS A and B cannot be used at the same time.
[NEO:6]
For selecting a DTS NEO:6 mode: CINEMA or MUSIC. Use when "NEO:6" lights in the ENHANCED SURROUND mode.
[INPUT MODE]
For selecting AUTO, ANALOG or DIGITAL.
[DVD 6CH INPUT]
For switching between 6-channel and 2-channel DVD input. When you select DVD 6CH, SOURCE DIRECT mode is on.
Basic operations
1
Switch on.
8
2
Turn SPEAKERS A on.
A SPEAKERS B
3
Select input.
INPUT SELECTOR
12
RQT6252
For your reference
¡When playing videotapes (connected to VCR 1) The picture remains on the screen even if you select TAPE, CD, MD/CD-R, TUNER or PHONO. ¡Once you have set a mode (DSP, AUTO/DIGITAL/ANALOG input, or 2-channel/6-channel input) for an input source That mode is engaged whenever you reselect the input source. ¡When using a graphic equalizer Some distortion may occur, depending on the equalizer's settings. ¡When SPEAKERS B is on The STEREO DSP SOUND mode is engaged automatically. ¡When you finish listening Be sure to reduce the volume and press [8] to switch the unit to standby. ¡When DTS FIX mode is on You cannot use ENHANCED SURROUND and DTS-ES signals will be played through 5. 1 channels (i. e. , there will be no sound from the surround back speaker). ¡When input is DIGITAL The tape monitor cannot be used.
[MULTI DECODER]
Light to indicate the source's input signal and decoding format used. When you select DVD 6CH, SOURCE DIRECT mode is on.
SFC
EFFECT
LEVEL
[TIMER]
For setting the wake/sleep timer.
[RE-MASTER]
For selecting a re-master mode.
NEO:6
TEST
TONE
BALANCE
For selecting a Dolby Pro Logic 2 mode: MOVIE, MUSIC or PANORAMA. Use when "DOLBY PRO LOGIC 2" lights in the SURROUND mode.
AUDIO DVD
GROUP
PAGE
SETUP
First select EFFECT, LEVEL, TONE or BALANCE, then press [/L] or [+/R] to adjust.
[EFFECT]
Use when adjusting Dolby Pro Logic 2, DTS NEO:6, or SFC effects
[SFC]
For selecting SFC modes.
[NEO:6]
For selecting a DTS NEO:6 mode: CINEMA or MUSIC. Use when "NEO:6" lights in the ENHANCED SURROUND mode.
[LEVEL]
Use when adjusting speaker level. To adjust the bass and treble.
[BALANCE]
To adjust the front speaker balance.
[TEST]
To start the speaker test signal.
[DIMMER]
For your reference
¡When using the subwoofer You cannot adjust subwoofer level while the SOURCE DIRECT mode is on or if DVD 6CH INPUT is selected. Sound can be distorted if you raise the volume while subwoofer level is high. ¡When muting is on Muting is also canceled when the unit is turned off.
RQT6252
Reference
15
For dimming the unit's display.
Others
[TONE]
Step 4
[DOLBY PRO LOGIC 2]
DIMMER
TV VOL
TV/AV
[/L, +/R]
Step 3
[DIRECT TUNING/DISC]
[DVD 6CH]
Step 2
Step 1
Before use
[^]
Sound modes
STEREO mode
DSP SOUND MODE ENHANCED SURROUND SOURCE DIRECT DSP SOUND MODE
SPEAKERS A
VOLUME INPUT SELECTOR
L
R
INPUT MODE DIGITAL
SOUND MODE STEREO
^ 8
WAKE
ENHANCED HQ RE-MASTER SOUND MODE SURROUND DSP DOLBY SOURCE DIRECT SOUND MODE PRO LOGIC2 NEO:6
MULTI DECODER DOLBY DOLBY DOLBY DTS-ES DIGITAL EX DIGITAL PRO LOGIC 2 DTS NEO:6
DOWN
UP
Use this mode to play digital or analogue stereo sources or to play surround sources through two speakers. When surround sources are played in this mode, the sounds intended for the other speaker channels are played through the front speakers.
PHONES A SPEAKERS B
INPUT DVD TAPE MODE 6CH INPUT MONITOR
RDS
- BAND FM MODE MEMORY PRESET DISPLAY MODE PTY SEARCH
VCR 3 2 TUNING 1 PTY SELECTOR S-VIDEO IN VIDEO IN L AUDIO IN R
DOLBY PRO LOGIC2 NEO:6
SURROUND mode
INPUT MODE DSP SOUND MODE
SUBWOOFER INPUT SELECTOR
SPEAKERS A INPUT MODE DIGITAL L SL C R SR LFE
SOUND MODE SURROUND
1 4 7
DIRECT TUNING/ DISC ENHANCED SURROUND DOLBY PROLOGIC 2
2 5 8 0
RE-MASTER
3 6 9
10/-/--
SOURCD DIRECT
INPUT MODE
DVD 6CH
TIMER
/L LEVEL
/R
/L
/R
Select this mode when you are playing a digital surround source (Dolby Digital or DTS). Also select this mode when playing analogue or digital stereo sources. Dolby Pro Logic 2 decoder works not only on sources recorded with Dolby Surround, but DOLBY PRO LOGIC2 also on any stereo source. The following modes are available when using Dolby Pro Logic 2.
SFC
EFFECT
LEVEL
NEO:6
TEST
TONE
BALANCE
EFFECT SFC
ENHANCED SURROUND mode
ENHANCED SURROUND
SPEAKERS A INPUT MODE DIGITAL L SL C SB R SR LFE
DIMMER AUDIO DVD
TV VOL GROUP PAGE
TV/AV SETUP
SOUND MODE SURROUND
Notes on using the Digital Signal Processor
The digital signal processor in this unit can decode the following signals: ¡ Dolby Digital, including Dolby Digital Surround EX ¡ DTS, including DTS-ES ¡ PCM, including PCM with sampling frequencies of 96 or 88. 2 kHz It cannot decode: ¡Other digital signals, such as MPEG ¡Dolby Digital RF signals from a laser disc player When playing PCM with sampling frequencies of 96 or 88. 2 kHz, the STEREO DSP mode is engaged automatically.
This mode uses the surround back speaker to create a realistic sound field. It is especially effective when playing DTS-ES and Dolby Digital Surround EX, but can be used with other DTS and Dolby Digital sources. [. . . ] 2 Begin recording.
Follow your recording unit's operating instructions.
/
3 Start the source to be recorded.
Follow your equipment's operating instructions. Note ¡With a tape deck, you can record any analogue source except TAPE. ¡With a MD deck or CD recorder, you can record any analogue source except TAPE and MD/CD-R/RW. ¡With a VCR (connected VCR 1), you can record any analogue source except TAPE and VCR 1. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PANASONIC SA-AK47
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PANASONIC SA-AK47 will begin.