User manual PANASONIC SC-HC3DB

[. . . ] Operating Instructions Compact Stereo System Model No. SC-HC3DB Supplied accessories Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts. These may be subject to change. ) 1 Remote control (N2QAYB000396) Dear customer Thank you for purchasing this product. Before connecting, operating or adjusting this product, please read the instructions completely. [. . . ] Among those frequencies, 7 are used in the United Kingdom (current as of March, 2009). Ensemble, station and service The number of stations that make up one frequency differ between DAB and analogue radio. Analogue stations all broadcast on different frequencies, even if it is the same company doing the broadcasting. With DAB however, it is possible to broadcast a number of stations on the same frequency. 10 In DAB terminology, a group of stations on the same frequency is called an ensemble. RQTX0256 As shown in the diagram, an ensemble consists of a group of stations which have primary services, they can also have secondary services. This means, for example, that commentary on sports events from different areas can all be broadcast at once. DAB (continued) DAB reception method on this unit Depending on the region there is a difference between broadcast frequency and stations broadcast along the same frequency. For this reason, a memory of receivable stations should first be created and then selected from those memorized stations as the reception method. If you are selecting DAB for the first time, "DAB AUTO SCAN" is displayed, stations that are currently receivable are memorized. DAB Auto Scan This function searches for currently receivable stations and inputs them into unit memory. When DAB is selected for the first time, this function starts automatically. Note Even if the station is stored into memory, some stations may not broadcast depending on the time of day etc. If this occurs, "NO SERVICE" is displayed. When a frequency is tuned the ensemble corresponding to the frequency is displayed. If this occurs, adjust the antenna and try Auto scanning or change the Auto scan frequency range ( page 13). Each time you press the button: "STATION TUNE" "PRESET TUNE" Press [u/t] or [y/i] to select a station. The station name changes in alphanumeric order. Station Memory Updating When there is a station name change, or a new station begins broadcasting, the unit memory is automatically updated when: · The previous station name is displayed by selecting "STATION TUNE". · One of the stations already broadcasting on the same frequency with the new station is displayed by selecting "STATION TUNE". Note · Deleting stations that are no longer broadcasting is not automatic. If you want to delete a station, perform Auto scan again and the new memory is created. · When a new frequency begins broadcasting, stations on the new frequency are not automatically added to memory. Also, you may need to change the Auto scan range if the new frequency is outside the factory set Auto scan range ( page 13). 3 DAB Auto Scan Press and hold [PLAY MODE] until "DAB AUTO SCAN" appears. When a frequency is tuned by Auto scanning on this unit, the ensemble corresponding to the frequency is displayed for approximately 2 seconds. Note · When updating memory with Auto scan, preset stations are not erased or changed. · When a frequency cannot be received, the previous memory is restored. · Total stations received is displayed for approximately 2 seconds. STATION TUNE You can select stations from the memory created as shown on page 10 in alphanumeric order. [. . . ] · Never use alcohol, paint thinner or benzine to clean this unit. · Before using chemically treated cloth, read the 20 instructions that came with the cloth carefully. RQTX0256 If the surfaces are dirty Care of the CD lens · Clean the lens regularly to prevent malfunctions. Use a blower to remove dust and a cotton swab if it is extremely dirty. [. . . ]