User manual PANASONIC SC-PM38DB

[. . . ] Operating Instructions CD Stereo System Model No. SC-PM38DB SUPPLIED ACCESSORIES Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts. These may be subject to change. ) Dear customer Thank you for purchasing this product. Before connecting, operating or adjusting this product, please read the instructions completely. These operating instructions are applicable to the following system. 1 x Remote control System Main unit Speakers SC-PM38DB SA-PM38DB SB-PM48 (N2QAYB000389) 2 x Remote control batteries Operations in these instructions are described using remote control, but you can do the operations with the main unit if the controls are the same. [. . . ] Press [u/t] or [y/i] to select the frequency of the required station. DAB (continued) DAB reception method on this unit DAB operation 1 DAB/FM PLAY MODE ENGLISH Depending on the region there is a difference between broadcast frequency and stations broadcast along the same frequency. For this reason, a memory of receivable stations should first be created and then selected from those memorized stations as the reception method. Press [DAB/FM] to enter DAB mode. If you are selecting DAB for the first time, "DAB Auto Scan. . . " is displayed, stations that are currently receivable are memorized. DAB Auto Scan This function searches for currently receivable stations and inputs them into unit memory. When DAB is selected for the first time, this function starts automatically. Note Even if the station is stored into memory, some stations may not broadcast depending on the time of day etc. When a frequency is tuned the ensemble corresponding to the frequency is displayed. If this occurs, adjust the antenna and try Auto scanning or change the Auto scan frequency range ( page 12). Each time you press the button: "STATION TUNE" "PRESET TUNE" Press [u/t] or [y/i] to select a station. The station name changes in alphanumeric order. Station Memory Updating When there is a station name change, or a new station begins broadcasting, the unit memory is automatically updated when: · The previous station name is displayed by selecting "STATION TUNE". · One of the stations already broadcasting on the same frequency with the new station is displayed by selecting "STATION TUNE". Note · Deleting stations that are no longer broadcasting is not automatic. If you want to delete a station, perform Auto scan again and the new memory is created. · When a new frequency begins broadcasting, stations on the new frequency are not automatically added to memory. Also, you may need to change the Auto scan range if the new frequency is outside the factory set Auto scan range ( page 12). 3 DAB Auto scan PLAY MODE STATION TUNE You can select stations from the memory created as shown on page 9 in alphanumeric order. You can easily select your favourite stations by using presets ( page 11). Press and hold [PLAY MODE] until "DAB Auto Scan" appears. When a frequency is tuned by Auto scanning on this unit, the ensemble corresponding to the frequency is displayed for approximately 2 seconds. Note · When updating memory with Auto scan, preset stations are not erased or changed. · When a frequency cannot be received, the previous memory is restored. · Total stations received is displayed for approximately 2 seconds. 10 RQTX0190 DAB (continued) Presetting Presetting channel Up to 20 channels can be set. To preset more stations, press [PLAY MODE] to select "STATION TUNE" and then repeat steps 1 to 3. Turning automatic clock adjustment function on DAB MENU 1 2 Press [DAB MENU] to enter menu mode. Within 10 seconds, press [e, r] to select "AUTO CLOCK ADJ. " and then press [OK]. Note You cannot preset stations when the station is not broadcasting or when you are selecting a secondary service. 3 Within 10 seconds, press [e, r] to select "ON ADJUST" and then press [OK]. Selecting a preset channel 1 2 PLAY MODE Press [PLAY MODE] to select "PRESET TUNE". Press [u/t] or [y/i] or numeric buttons to select a channel. Select "OFF ADJUST" to turn the automatic clock adjustment function off. To exit Press [DAB MENU] again. Listening to the secondary service DAB SECONDARY Checking the DAB signal quality DAB MENU Press the [DAB SECONDARY] to select the secondary service. [. . . ] Woofer 10 cm Cone type Tweeter 6 cm Cone type Impedance 4 Input power (IEC) 20 W (MAX) Output sound pressure 80. 5 dB/W (1. 0 m) Frequency range 52 Hz to 31 kHz (-16 dB) 74 Hz to 27 kHz (-10 dB) Dimensions (W x H x D) 145 mm x 226 mm x 197 mm Mass 1. 9 kg Maintenance If the surfaces are dirty To clean this unit, wipe with a soft, dry cloth. · Never use alcohol, paint thinner or benzine to clean this unit. · Before using chemically treated cloth, read the instructions that came with the cloth carefully. RQTX0190 19 ENGLISH Safety precautions Placement Set the unit up on an even surface away from direct sunlight, high temperatures, high humidity, and excessive vibration. These conditions can damage the cabinet and other components, thereby shortening the unit's service life. [. . . ]