User manual PANASONIC SC-PM5

[. . . ] Operating Instructions CD Stereo System Model No. SC-PM5 Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions thoroughly before connecting, operating or adjusting this product. Please keep this manual for future reference. SUPPLIED ACCESSORIES Please check and identify the supplied accessories. 1 x AC mains lead For Continental Europe, Southeast Asia and Middle Eastern countries (K2CQ2CA00007) For Australia and N. Z. [. . . ] Note: · The included AC mains lead is for use with this unit only. · Do not use an AC mains lead from other equipment. Incorrect connection can damage the unit. Antenna connections Place the antenna where reception is best. Click! FM indoor antenna To household mains socket DEMO function When the unit is first plugged in, a demonstration of its functions may be shown on the display. If the demo setting is off, you can show a demonstration by selecting "DEMO ON". The display changes each time you press and hold the button. 7, -DEMO While in standby mode, select "DEMO OFF" to reduce power consumption. RQTX0182 5 Overview of controls Main unit Refer to the numbers in parentheses for page reference. Buttons labelled such as 1 function in exactly the same way as the controls on the remote control. Top of unit Music port jack (10) Headphone jack ( ) Avoid listening for prolonged periods of time to prevent hearing damage. Excessive sound pressure from earphones and headphones can cause hearing loss. Plug type: Ø 3. 5 mm stereo (not included) Display panel Remote control signal sensor BASS or TREBLE selection (9) 8 7 USB port (10) 1 Standby/on switch (y/l) Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. Stop playback, Demonstration function (5) 4 2 6 3 Disc tray open or close (7) Disc tray 5 Remote control Buttons labelled such as 1 function in exactly the same way as the controls on the main unit. Clock or timer setting (9) 1 Dimmer function Play timer setting (9) Sleep timer setting (9) Auto off function 4 Volume control (7) Delete function (7) Program function (7, 8) Repeat function (7) 2 USB play or pause (10) Numeric selection (7, 8, 10) Muting function Play mode function (7, 8) 5 Disc play or pause (7) 6 Music port selection (10) 7 Track skip or search, tune or preset channel selection, time adjustment, bass/treble adjustment (7 to 10) This auto off function allows you to turn off the unit in disc or USB mode only after left unused for 10 minutes. TREBLE selection (9) MP3 Information display (7) Input level selection (10) FM mode selection (8) · Press the button to activate · Press again to cancel Mutes the sound. 3 FM/AM selection (8) RE-MASTER selection (10) Preset EQ selection (9) Stop playback (7, 10) BASS selection (9) 7 [2 3], Album selection (7, 10) [5 ], Disc and USB play (7, 10) [OK], Confirm selection (7, 10) [OK] Display function (7, 8) Auto preset selection (8) 8 Surround selection (10) 6 Tuning mode selection (8) RQTX0182 Discs Basic play MP3 Elapsed play time Album name Track name Press [MP3 INFO] repeatedly during play or pause. MP3 1 2 3 4 Press [y] to turn the unit on. Press [7] (stop). ID3 (Album) ID3 (Track) ID3 (Artist) Elapsed play time Note: · This unit supports ver. · ID3 is a tag embedded in MP3 tracks to provide information about the track. Stop playback Advanced play Repeat play CD MP3 Pause play Press [6, CD]. Press again to resume play. You can repeat program play or other selected play mode. During RANDOM or 1-ALBUM RANDOM play, you cannot skip to tracks that have been played. During RANDOM play, you can search backward or forward only within the current track. ( see "Play Mode function") Search through tracks CD Press [REPEAT]. "ON REPEAT" and " " are displayed. To cancel Press [REPEAT] again. "OFF REPEAT" is displayed and " " is cleared. Program play This function allows you to program up to 24 tracks. CD Press and hold [4/1] or [¡/¢] during play or pause. MP3 Skip album Press [5/, ALBUM] in the play mode. Press [5/, ALBUM] once and then the numeric buttons in the stop mode. 1 2 3 4 Press [6, CD] and then [7] (stop). Press [6, CD] to start play. Play Mode function CD MP3 MP3 Press [PLAY MODE] to select the desired mode. Press the numeric buttons to select the track. MP3 1-ALBUM 1ALBUM 1 2 3 4 5 6 Press [6, CD] and then [7] (stop). [. . . ] Press [INPUT LEVEL] to select your desired setting. USB enabled device (not included) HIGH NORMAL Note: Select "NORMAL" if the sound is distorted when level HIGH is activated. Playing a USB mass storage device 1 2 Reduce the volume and connect the USB mass storage device to the USB port. Press [4/1] or [¡/¢]. Avoid interfering with other Panasonic equipment Other Panasonic audio or video equipment may start functioning when you operate the unit using the supplied remote control. You can operate this unit in another mode by setting the remote control operating mode to "REMOTE 2". The main unit and remote control must be set to the same mode. Pause play Stop play 1 2 Press and hold [MUSIC P. ] on the main unit and [2] on the remote control until the main unit's display shows "REMOTE 2". [. . . ]