User manual PANASONIC SC-PT170

[. . . ] Region number/Numer regionu/Císlo regionu The player plays DVD-Video marked with labels containing the region number "2" or "ALL". For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read the instructions completely. Operations in these instructions are described mainly with the remote control, but you can perform the operations on the main unit if the controls are the same. [. . . ] If the language selected for "AUDIO" is not available, subtitles appear in that language (if available on the disc). Setting ratings (When level 8 is selected) 0 LOCK ALL: To prevent play of discs without rating levels. 1 to 7 8 NO LIMIT When you select your ratings level, a password screen is shown. 16:9: Widescreen TV (16:9) 4:3PAN&SCAN: Regular aspect TV (4:3) The sides of the widescreen picture are cut off so it fills the screen (unless prohibited by the disc). When connected with a Plasma display, adjust if you notice the audio is out of sync with the video. 0 ms/AUTO 20 ms 40 ms 60 ms 80 ms 100 ms When using VIERA Link "HDAVI Control" with "HDAVI Control 3 or later" compatible TV ( 20), select "0 ms/AUTO". AUTO FIELD§ : The picture is not blurred, but picture quality is lower. Choose the video signal format to be output from the SCART (AV) terminal. VIDEO S-VIDEO RGB 1: (Only when connected to a RGB compatible TV) If you always would like to view the picture from the unit in RGB signal, select this mode. The TV screen will automatically switch to display the picture from the unit when the unit is turned on. RGB 2: (Only when connected to a RGB compatible TV) When in TV tuner mode, if the selector is set to "DVD/CD", the TV screen will automatically switch to display the picture from the unit only during disc playback ([DVD-V] [DVD-VR] [VCD]) or when viewing on-screen menu of DVD/CD. The TV picture will be displayed when the selector is set to "AV". TEST TONE: SETTING Use the test tone for speaker level adjustments ( 13, Adjusting the speaker output level manually). Select to suit the type of equipment you connected to the HDMI AV OUT terminal. Select "BITSTREAM" when the equipment can decode the bitstream (digital form of 5. (If the bitstream is output to the equipment without a decoder, high levels of noise can be output and may damage your speakers and hearing. The resolution of the video output from the HDMI AV OUT terminal is optimized according to the capability of the connected equipment (e. Video output will not depend on the connected equipment, but on this unit. BITSTREAM PCM BITSTREAM PCM BITSTREAM PCM When audio is output from HDMI AV OUT terminal, and the connected equipment does not support the item selected, the actual output will depend on the performance of this connected equipment. (Depending on the capabilities of the connected equipment, audio output may differ from the audio settings of the main unit. This works only when "COLOUR SPACE" in Menu 4 (HDMI) is set to RGB ( 19). 1-channel sound, all the speakers, except for the subwoofer, should be the same distance from the seating position. [. . . ] Film: Recorded at 25 frames per second (PAL discs) or 24 frames per second (NTSC discs). Video: Recorded at 25 frames/50 fields per second (PAL discs) or 30 frames/60 fields per second (NTSC discs). If a Video CD has playback control, you can select scenes and information with menus. The PAL video signal standard has 576 interlaced (i) scan lines, whereas progressive scanning, called 576p, uses twice the number of scan lines. [. . . ]