User manual PANASONIC SL1210GREG

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PANASONIC SL1210GREG. We hope that this PANASONIC SL1210GREG user guide will be useful to you.


PANASONIC SL1210GREG : Download the complete user guide (20657 Ko)

Manual abstract: user guide PANASONIC SL1210GREG

Detailed instructions for use are in the User's Guide.

[. . . ] Each day the discovery of a truly emotive experience from an unencountered sound awaits. (02) English Delivering the Ultimate Emotive Musical Experience to All At Technics we understand that the listening experience is not purely about technology but the magical and emotional relationship between people and music. We want people to experience music as it was originally intended and enable them to feel the emotional impact that enthuses and delights them. Through delivering this experience we want to support the development and enjoyment of the world’s many musical cultures. [. . . ] Hold the tone arm and turn the balance weight in the arrow direction to adjust the balance until the arm is approximately horizontal. ρ Take care not to Balance weight allow the stylus tip to touch the Hold here turntable or main to turn unit. 1 Turn the stylus pressure control until “0“ comes to the centre line of the rear of the tone arm. Stylus pressure control Hold here to turn Balance weight Centre line Arm clamp Arm clamp Arm rest Cue lever Anti-skating control Note  Refer to the user's guide for your stylus for the appropriate stylus pressure. 18 (18) English Anti-skating 2 Turn the balance weight to adjust to the appropriate stylus pressure for the cartridge. ρ The stylus pressure control will turn together with the balance weight. ρ Turn until the centre line points to the appropriate stylus pressure. 1 Turn the anti-skating control to adjust it to the same value as the stylus pressure control. Getting started Balance weight Hold here to turn Turns together 1 0 Centre line Note  For stylus pressures 3 g and above, adjust anti-skating control to “3”. 2 3 19 English (19) Adjustment (continued) Tone arm height Make this adjustment only if the cartridge you are using makes it necessary. 3 After arm height adjustment is finished, lock the tone arm by turning the arm lock knob. ρ Be sure to turn the arm lock knob to the end as shown in the figure below. Arm lock (Released) (Locked) 2 Adjust the height with the armheight control ring. Adjust the arm height until the tone arm becomes parallel to the record. When you don't know the cartridge  height (H) or when you don’t use the supplied head shell  Use the chart below as reference to find the appropriate position mark for the height of your cartridge. (For supplied head shell) Cartridge height (H) in millimeters 17 18 19 20 21 22 23 Height control position 0 1 2 3 4 5 6 Remove the stylus cover, taking care not to damage the stylus, then release the arm clamp. Lower the cue lever, rest the stylus on the record and adjust the height control until the tone arm and record are parallel. ρ If the cartridge height (H) is too small to make them parallel to each other, add a “cartridge spacer” (not supplied). Parallel to a record  Turn the arm-height control ring to align the position mark with the index line. ρ For finer adjustment, use a level (not included) to adjust the arm height so that the cartridge becomes parallel to a record. 4 3 Index line Arm-height control ring 20 (20) English 3 KATING TI-S AN 0 Armlift height Make an adjustment according to your cartridge if necessary. ρ Remove the stylus cover, taking care not to damage the stylus, then release the arm clamp. [. . . ]  Turn [ON/OFF] to ON and press [START-STOP] to rotate the turntable. ρ If the strobe light or the blue indicator blinks again, check which one is blinking and contact our service representative. 5 kg 0 °C to 40 °C Tone arm section Type Effective length Overhang Tracking error angle Static Balance 230 mm 15 mm Within 2° 32' (at the outer groove of 30 cm (12“) record) Within 0° 32' (at the inner groove of 30 cm (12“) record) 22° 35 % to 80 % RH (no condensation) Offset angle Turntable section Type Drive method Motor Turntable Direct drive manual turntable Direct drive Brushless DC motor Aluminum diecast Diameter: 332 mm Mass: Approx. 5 kg (including a rubber sheet) Arm-height 0 – 6 mm adjustment range Stylus pressure 0 – 4 g (direct reading) adjustment range Head shell weight Approx. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PANASONIC SL1210GREG




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PANASONIC SL1210GREG will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.