User manual PANASONIC WJ-MX10

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PANASONIC WJ-MX10. We hope that this PANASONIC WJ-MX10 user guide will be useful to you.


PANASONIC WJ-MX10 : Download the complete user guide (3082 Ko)

Manual abstract: user guide PANASONIC WJ-MX10

Detailed instructions for use are in the User's Guide.

[. . . ] The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. [. . . ] G Start Display (START DISPLAY) The image in the selected form will be displayed on the monitor when the recorder is turned on. single image: CH 1 to CH 8 Quad image: QUAD-4A (including 1-4) , QUAD-4B (including 5-8) Multi image: 9SCREEN (including 1-8) Sequence: SPOT SEQ , MULTI SEQ STEP 1 2 3 4 5 6 7 8 CAM ?Select the duration for the step with the JogDial, and press the JogDial. Available durations: 2-30S G Multiscreen Selection (MULTI SEL MODE) When pressing the [MULTI SCREEN SEL] button on the front panel, the monitor display will change as follows depending on the setup. Repeat steps 1, 2, and 3 until all steps are programmed, or press the [SETUP/ESC] button to return to the SEQUENCE SETUP menu. EXT: Forwards the step when the SEQ IN signal is input to the rear panel. Repeat steps 1, 2, and 3 until all steps are programmed, or press the [SETUP/ESC] button to return to the SEQUENCE SETUP menu. Procedures for SEQUENCE TIMING are the same as step 5 in MULTI SEQ SETUP. Procedures for AUTO SKIP are the same as in step 6 of MULTI SEQ SETUP. G Camera View Setup (CAMERA VIEW SETUP) Open the CAMERA VIEW SETUP menu to program the live image of each camera channel to be displayed or vailed on the monitor. CAMERA VIEW SETUP CAM 1 2 3 4 5 6 7 8 MODE ON ON ON ON OFF OFF OFF OFF G Spot Sequence Setup (SPOT SEQ SETUP) Open the SPOT SEQ SETUP menu to program the sequence steps for displaying single input images. The available split patterns are: Quad A (input 1, 2, 3, 4), Quad B (input 5, 6, 7, 8), and 9-split (input 1-8). The pattern changes every time the button is pressed depending on the setup for MULTI SEQ SETUP. Pattern 4A MULTISCREEN SELECT G Viewing a Single Live Sequence The multiscreen monitor and spot monitor can display a single live sequence. One sequence can be programmed in the menu setup with the input assignment and display duration for each step. (4A) 1 3 2 4 MULTISCREEN SELECT (4B) 5 7 6 8 9 divisions d'image 1 4 7 2 5 8 3 6 MULTISCREEN SELECT When QUAD ONLY is selected: Pattern 4A ?Pattern 4A MULTISCREEN SELECT SEQUENCE 1 2 (4A) 1 3 2 4 MULTISCREEN SELECT (4B) 5 7 6 8 8 3 While running, the LED of the input image presently displayed on the monitor will illuminate in the corresponding numeric button. g Viewing a Quad Live Sequence A series of quad images is displayed in succession on the monitor. One sequence can be programmed in the menu setup with the display duration for each step. Press any of the numeric buttons to quit the sequence and return to spot monitoring. Note: The Auto Skip function can be programmed in the menu setup to be applied to the sequence to skip any steps where no video signal is present. When the single live mode is activated during the sequence, both the multiscreen monitor and spot monitor can be switched to the single live image. [. . . ] We strongly recommend that, before formatting, you either save the recorded data into the server via the network, or you save the data on VCR tapes via the REC OUT terminal. When YES is selected, the display YES will turn to SET DONE for 5 seconds, and the window will return to normal operation. Access to the HDD will be possible if the correct password is entered. Rotate the JogDial to select the HDD you wish to format, and press the JogDial. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PANASONIC WJ-MX10




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PANASONIC WJ-MX10 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.