User manual PEEKTON PKM 500 RDS

[. . . ] DISCS or (DISC Media) Do not use irregularly shaped discs such as heart or star-shaped discs as they may cause the unit to malfunction. Clean the disc by wiping the disc from the center out with a soft lint free cleaning cloth. Some playback operations of discs may be intentionally fixed by software producers. Unit plays discs according to the disc contents the software producers designed therefore some playback features may not be available. [. . . ] Connecting a TV Antenna (Refer to Figure 3) Connect an optional TV antenna to the "TV ANTENNA" jack on the back of the DVD player. G. Playing After connecting power to the unit, press the power button on the main unit momentarily. Insert the disc into the slot on the front of the unit, the unit will load the disc and start playing automatically: If there's a disc inside the unit, press the POWER button, the unit will start playing automatically. 1. BASIC OPERATION POWER EJECT PLAY SLOW PAUSE STOP NEXT PREVIOUS FAST FORWARD FAST REVERSE UP/DOWN/LEFT/RIGHT ENTER Turn the unit on/off Eject/load the disc Start Play/Execute item or setting Play at 1/2, 1/4, 1/6 or 1/7 times speed Still Picture (1 time) Stop at the present playing point / (2 times) Stop playing Go to the next chapter, track or scene during play back Go back to the preceding chapter, track or scene during play back Scan forward at 2, 4, 8 or 20 times normal speed Scan backward at 2, 4, 8 or 20 times normal speed Used for Menu Navigation Execute item or setting 9 1. BASIC OPERATION (CONTINUED) Select item or setting Return Display the root menu of the disc Repeat playing title, chapter, or track Display information (title, chapter, track, time, etc. ). Change the angles of a scene Select the subtitle language Select the audio language Enlarge an image to 2, 3, or 4 times the original When the unit is in play mode this button will bring up a display for Brightness + Sharpness adjustment. For DVD playback Setup press stop and then press Setup to select and set items, and exit the setup menu. NUMBERS RETURN MENU REPEAT DISPLAY ANGLE SUBTITLE AUDIO ZOOM SETUP 2. When you play a DVD, a root menu of the disc will appear on the screen of your TV or Monitor. Some DVDs only allow you to select disc playback options using the DVD root menu. 10 3. DISPLAY 1) Display mode During playback press DISPLAY once to display items 5, and 7. ANGLE During playback press ANGLE to change the current angle of discs containing multi-angles. Select the TV mode by pressing the mode button on the remote or the front panel. The current channel number will be displayed on the monitor and tv ch17 will be displayed on the front panel display. Press the STOP/MEMORY button on the remote control to automatically search and store all active channels into memory 3. Use the CH- and CH+ buttons to search through the channels stored in memory. 15 4. Direct access any channel by using the numeric keypad on the remote control. Pressing the PLAY/ENTER/ADD button on the remote control will alternately ADD or DELETE channels from memory. SETUP Press STOP and then Press `SETUP' to display the Main screen of the SETUP Menu on the screen. Press `SETUP' again to exit the SETUP Menu and the unit will resume it's last playback mode. Main `SETUP' Menu Screen 1) Select language using the LEFT/RIGHT buttons. `Language' Display Menu a. Select `OSD Menu' using the UP/DOWN buttons, then press ENTER to enter the submenu. Select the OSD language you desire using the UP/DOWN buttons, then press ENTER to confirm the setting. `OSD' Display Menu 16 b. Select `Subtitle' using the UP/DOWN buttons, then press ENTER to enter the submenu. [. . . ] To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e. g. dated bill of sale), specification of defect(s), transportation prepaid, to the Company at the address shown below. This Warranty does not extend to the elimination of externally generated static or noise, to correction of antenna problems, to costs incurred for installation, removal or reinstallation of the product, or to damage to digital memory cards, discs, speakers, accessories, or vehicle electrical systems. This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through alteration, improper installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial number/bar code label(s). [. . . ]