User manual PHILIPS 42HFL7008D

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS 42HFL7008D. We hope that this PHILIPS 42HFL7008D user guide will be useful to you.


PHILIPS 42HFL7008D : Download the complete user guide (1335 Ko)

You may also download the following manuals related to this product:

   PHILIPS 42HFL7008D (2192 ko)
   PHILIPS 42HFL7008D (2145 ko)
   PHILIPS 42HFL7008D (1387 ko)
   PHILIPS 42HFL7008D (1387 ko)
   PHILIPS 42HFL7008D (1370 ko)
   PHILIPS 42HFL7008D (1418 ko)
   PHILIPS 42HFL7008D (1427 ko)
   PHILIPS 42HFL7008D (1378 ko)
   PHILIPS 42HFL7008D (1370 ko)

Manual abstract: user guide PHILIPS 42HFL7008D

Detailed instructions for use are in the User's Guide.

[. . . ] Note 1: If the TV is in commercial mode, it might not respond to the front panel or the remote control, depending upon the TV's mode and setup configuration. Please refer to the section TV Installation and TV Setup Menu in this documentation for more information. To load the supplied batteries into the remote control: Remove the battery compartment lid from the back of the remote control. Ensure that the (+) and (-) ends of the batteries are placed in the correct positions. [. . . ] The specific steps for entering Hotel Mode Menu, setting Hotel Mode to No, making changes to the consumer set and then reversing the process are as follows: 1. Set is now in consumer mode and changes can be made to the noncommercial settings. When finished with consumer settings, press sequence 3, 1, 9, 7, 5, 3, mute to enter "Hotel Mode Menu" 11. Set Hotel Mode to yes, scroll down and ensure PSIP** is set to desired setting. Remove AC power from set for at least 5 seconds and the n restore AC power to set. Wait about 10 seconds (you will hear a click around that time), then press power button on setup remote (in setup mode) 14. Press power button on setup remote to turn set off and then turn back on to ensure settings are saved. ** ATSC digital terrestrial broadcast channels send information along with the television signal that is known as PSIP information. PSIP information contains data such as the channel numbers that will normally be seen by the viewer of the channel. These channels are virtual channels meaning the channel numbers displayed may not represent the channel numbers where the signals are physically located. In normal viewing of ATSC signals by consumers, these virtual channels are used when tuning. This item indicates the Program number as defined by PMT if PSIP is set to NO. Cursor left or right to navigate between character positions within the label field. Cursor up or down to select characters from the list: A to Z, 0 to 9, -, . WELCOME MESSAGE: A welcome message (two lines, 20 characters) can appear on-screen when the set is powered on. The message remains on-screen until the TV receives a command from the remote or front panel or times out in 25 seconds. When the WELCOME MESSAGE setup menu item is highlighted, cursor right or left to invoke the MESSAGE sub- menu. SWITCH ON CHANNEL: TV 1-TV 125/HDMI 1/HDMI 2/SIDE AV/AV 1/AV 2/ / STANDARD) Specify the channel / input to which the TV will be tuned when it is powered on. ), then that will always be the channel / input at power-on, until SWITCH ON CHANNEL is changed. SWITCH ON VOLUME: (STANDARD / 0 - 99) Specify the volume setting that takes effect when the TV is powered on. if STANDARD , the volume at power-on will be the volume at which the TV was prior to last power-down. If specified as 0 - 99, that will always be the volume at power-on, until SWITCH ON VOLUME is changed. [. . . ] The picture is enlarged to 14:9 format, a thin black band remains on both sides of the picture. This mode is recommended when displaying pictures that have black bands at the top and bottom (letterbox format). This mode is used to display 4:3 pictures using the full surface of the screen leaving the subtitles visible. This mode is used to display 4:3 pictures using the full surface of the screen by enlarging the sides of the picture This mode restores the correct proportions of pictures transmitted in 16:9 using the full screen display. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS 42HFL7008D




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS 42HFL7008D will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.