User manual PHILIPS CD610

[. . . ] if the mains plug contains a fuse , this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. Note: The severed plug must be disposed to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere. How to connect a plug The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L). [. . . ] 4 Rotate ¡ JOG CONTROL TM (press the numerical keys on the remote control; for 2-digit numbers, press the keys in rapid succession) to select the required track numbers and store each track by pressing YES. The number of programmed tracks (STEP), PROG and the total program time are displayed. If you wish to program a complete CD from the CD Changer rotate ¡ JOG CONTROL TM to select CD1 (or 2, 3) ALL and press YES. Note: If the maximum number of programmable tracks is reached, the display shows PROGRAM FULL. ­ Recording from external CD player: ­ Digital ­ Digital (synchronized start with external CD player) ­ Analog ­ Finalizing discs: Finalizing a CDR(W) disc is a simple procedure, necessary to: ­ play a recorded CDR on a standard CD player ­ play a recorded CDRW on a CDRW compatible CD player · the recording procedure is the same for CDR and CDRW discs. Make sure that the CDR(W) is absolutely free of scratches and dust particles. If the disc already contains recordings, the CD recorder will automatically search for the end of the last track, so that recording can start from there. Else, NOT FITTING is displayed and you cannot enter into the record standby mode. When you try to record a copy protected material from an external source, COPY PROTECT will be displayed. It ensures a perfect recording of the source material, meaning a true "bit for bit" recording. DLR will always become active, when you make normal recordings in listen mode. ­ If required the recording level can be set first, using the REC LEVEL key. 1 Make sure that the CDR(W) is absolutely free of scratches and dust particles. Both decks will be selected in the display, the arrow and the YES key start blinking. If the total time of the program is of bigger size than the remaining recording time of the CDR(W): NOT FITTING ! will be displayed briefly , followed by the remaining recording time and RECORD PROG ?If you still start recording, only the tracks of the program that fit onto the CDR(W) will be recorded. Now you can change the program (see "Program") and return to the record mode by pressing COMPILE CD. 5 Press either: YES, if the CDR(W) shall be finalized after recording, or NO, if the CDR(W) shall not be finalized after recording. The arrow lights, RECORDING IN PROGRESS is shown, high speed recording and FINALIZE (if selected) start and the actual recording time left starts to count down. If STOP 9 was pressed within 3 seconds after YES, no recording will take place. Note: If no program is available and you press COMPILE CD, you enter immediately into the program menu. [. . . ] Make sure, when using high speed recording and automatic finalizing, to enter the text before finalizing starts, otherwise automatic finalizing will be cancelled. After you have recorded your CDR(W), the TEXT EDIT feature allows you to give names to to discs and tracks. All names will be stored in the memory and can be called up and changed at any time. The following items can be selected: ALBUM ARTIST: for editing the CD artist. [. . . ]