User manual PHILIPS GC4511/20 AZUR PERFORMER

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS GC4511/20 AZUR PERFORMER. We hope that this PHILIPS GC4511/20 AZUR PERFORMER user guide will be useful to you.


PHILIPS GC4511/20 AZUR PERFORMER : Download the complete user guide (2351 Ko)

Manual abstract: user guide PHILIPS GC4511/20 AZUR PERFORMER

Detailed instructions for use are in the User's Guide.

[. . . ] Therefore, it is recommended to use distilled or demineralized water to prolong the lifetime of your appliance. Do not put perfume, vinegar, starch, descaling agents, ironing aids or other chemicals in the water tank. Ironing Please read the quick start guide in this user manual carefully to start using your appliance. [. . . ] Temperature setting Select the temperature to the appropriate setting for your garment according to table 1 below: Table 1: Fabric type Linen Cotton Wool Silk Synthetic fabric (e. Acrylic, nylon, polyamide, polyester) Temperature setting MAX ●●● ●● ●● ● Automatically adjusted to no steam Auto steam control Steam boost Yes Yes No No No Automatically adjusted to the optimal amount ENGLISH Steam setting 7 -- Auto steam: The iron automatically adjusts the steam output according to the selected temperature to provide the best ironing result. -- ECO: This steam setting enables you to reduce the steam output to save energy and still have sufficient steam to iron your garments. -- Dry: This steam setting enables you to iron without steam or to stop steam when the iron is not in use. -- Iron with extra steam: Press and hold the steam boost trigger to get more steam to remove stubborn creases. Steam boost function and vertical steaming -- Press and release the steam boost trigger for a powerful boost steam. This can be used to remove targeted stubborn creases or creases from a hanged garment. Note: The steam boost function should only be used at temperature setting between ●●● to MAX. Safety auto-off (specific types only) The safety auto-off function automatically switches off the iron if it has not been used for 30 seconds resting on its soleplate or 8 minutes resting on its backplate. Keep pushing the calc clean button and gently shake the iron forth and  back until all water in the water tank has been used up (Fig. Scales is flushed out, steam and boiling water also come out of the soleplate. Note: Repeat steps 2 to 5 if the water that comes out of the iron still contains scale particles. 8 Move the iron gently over a piece of cloth to remove any water stains on the soleplate. ENGLISH 9 Troubleshooting This chapter summarises the most common problems you could encounter with the appliance. €If you are unable to solve the problem with the information below, visit www. Com/support for a list of frequently asked questions or contact the Consumer Care Centre in your country (see the worldwide guarantee leaflet for contact details). Water drips from the soleplate after the iron has been unplugged or has been stored. You have put the iron in horizontal position with water still left in the water tank. [. . . ] You have put the iron in horizontal position with water still left in the water tank. Use a piece of cloth to wipe off calc in the opening of the back part of the iron. (See chapter ‘Cleaning and maintenance’ , section ‘Quick calc release function’). [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS GC4511/20 AZUR PERFORMER




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS GC4511/20 AZUR PERFORMER will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.