User manual PHILIPS HD9384/20

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS HD9384/20. We hope that this PHILIPS HD9384/20 user guide will be useful to you.


PHILIPS HD9384/20 : Download the complete user guide (1509 Ko)

You may also download the following manuals related to this product:

   PHILIPS HD9384/20 (857 ko)
   PHILIPS HD9384/20 (857 ko)
   PHILIPS HD9384/20 (857 ko)
   PHILIPS HD9384/20 (842 ko)
   PHILIPS HD9384/20 (857 ko)
   PHILIPS HD9384/20 (881 ko)
   PHILIPS HD9384/20 (3690 ko)
   PHILIPS HD9384/20 (3690 ko)
   PHILIPS HD9384/20 (3690 ko)

Manual abstract: user guide PHILIPS HD9384/20

Detailed instructions for use are in the User's Guide.

[. . . ] A serving tray), as this could cause water to accumulate under the appliance, resulting in a hazardous situation. -- Do not touch the body of the kettle during and some time after use, as it gets very hot. If the kettle has been overfilled, boiling water may be ejected from the spout and cause scalding. Be careful when you remove the lid immediately after the water has boiled: the steam that comes out of the kettle is very hot. [. . . ] However, the actual temperature of the water may deviate slightly from the indicated temperature. -- There are 4 buttons that represent different hot drinks: black/fruit/ herbal tea (100ºC), instant soup/hot chocolate (95ºC), instant coffee (90ºC) and green tea (80ºC). , , The water starts heating to the temperature of the selected preset button. , , While the water is heated, the light ring around the selected button slowly pulsates until the water has reached the desired temperature (Fig. , , If the current temperature of the water in the kettle is higher than the temperature of the selected preset button, the light ring does not pulsate, but flashes 3 times to indicate that this button cannot be operated (Fig. Note:You can deactivate the appliance by pressing the button again or by removing the kettle from the base. , , When the water has reached the set temperature, you hear an audible signal. The light ring around the selected button stops pulsating and lights up continuously (Fig. 2 The kettle heats the water to the temperature of the selected preset Note:You can select a different type of hot drink by pressing a different preset button while the kettle is operating. This is only possible if the temperature of the water is still below the temperature of the newly pressed button. Keeping water warm You can use the keep-warm function to keep water warm for 30 minutes at the temperatures of the different preset buttons (40°C, 80°C, 90°C, 95°C or 100°C). Note: Only use the keep-warm function in combination with a preset button. Only use the keep-warm function when there is at least 0. If there is too little water in the kettle, the kettle may switch off before the 30 minutes have elapsed to protect the heating element. Keeping water warm at a desired temperature 1 Press a preset button to set the desired temperature (see section -- Once every 3 months for areas with average water hardness. 1 Fill the kettle with white vinegar (8% acetic acid) up to one quarter of the MAX indication. 3 Press the green tea button to heat up the water to 80ºC and then press the KEEP WARM button. 5 Repeat the descaling procedure if there is still some scale in the kettle. Note: If you take the kettle off the base before the descaling process is finished, the appliance switches off automatically. You can also deactivate the descaling process by pressing any of the preset buttons. Storage -- To store the cord, wind it around the cord storage facility in the bottom of the base (Fig. Ordering accessories To purchase accessories for this appliance,  please visit our online shop at www. [. . . ] Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance. Cleaning the kettle and the base 1 Clean the outside of the kettle and the base with a soft cloth The light ring around one preset button lights up while the other light rings are off. Problem After the water has reached the set temperature, the light of the selected preset button stays on for 5 minutes. The temperature of the water is higher than the temperature of the selected preset button. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS HD9384/20




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS HD9384/20 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.