User manual PHILIPS HTL2160

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS HTL2160. We hope that this PHILIPS HTL2160 user guide will be useful to you.


PHILIPS HTL2160 : Download the complete user guide (1379 Ko)

You may also download the following manuals related to this product:

   PHILIPS HTL2160 QUICK START GUIDE (2522 ko)
   PHILIPS HTL2160 QUICK START GUIDE (2522 ko)

Manual abstract: user guide PHILIPS HTL2160

Detailed instructions for use are in the User's Guide.

[. . . ] Only use attachments/accessories specified by the manufacturer. •• •• Important safety instructions •• •• •• •• •• •• •• •• Read these instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or EN •• •• Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storm or when unused for long periods of time. [. . . ] • Reset your bass level to the default settings programmed at the factory. • Reset your treble level to the default settings programmed at the factory. j Mute or restore volume. b k c j d i e f g h k COAX Switch your audio source to the coaxial connection. Connectors This section includes an overview of the connectors available on your SoundBar. a (Standby-On) Switch the SoundBar on or to standby. Top connectors b Bluetooth Switch to Bluetooth mode. c AUX/AUDIO-IN Switch your audio source to the AUX or audio input connection. e USB Switch your audio source to the USB connection. 7 EN a a b (USB) Audio input from a USB storage device. b AUDIO-IN Audio input from an MP3 player (3. 5mm jack). Rear connectors d a b c e a AUDIO IN Connect to an analog audio output on the TV or an analog device. b DIGITAL IN-COAXIAL Connect to a coaxial audio output on the TV or a digital device. c DIGITAL IN-OPTICAL Connect to an optical audio output on the TV or a digital device. e AC MAINS~ Connect to the power supply. EN 8 3 Connect This section helps you connect your SoundBar to a TV and other devices. For information about the basic connections of your SoundBar and accessories, see the quick start guide. Note •• For identification and supply ratings, refer to the type •• Before you make or change any connections, make sure plate at the back or bottom of the product. that all devices are disconnected from the power outlet. Connect audio from TV and other devices Play audio from TV or other devices through your Soundbar speakers. Use the best quality connection available on your TV, Soundbar, and other devices. Option 1: Connect audio through a digital optical cable Best quality audio TV Placement Place the subwoofer at least 1 meter (3 feet) away from your SoundBar, and ten centimeters away from the wall. For best results, place your subwoofer as shown below. 1 Using an optical cable, connect the OPTICAL connector on your SoundBar to the OPTICAL OUT connector on the TV or other device. • The digital optical connector might be labeled SPDIF or SPDIF OUT. Option 2: Connect audio through a digital coaxial cable Best quality audio 1 Using a coaxial cable, connect the COAXIAL connector on your SoundBar to the COAXIAL/DIGITAL OUT connector on the TV or other device. 9 EN • The digital coaxial connector might be labeled DIGITAL AUDIO OUT. Option 3: Connect audio through analog audio cables Basic quality audio 1 Using an analog cable, connect the AUX connectors on your SoundBar to the AUDIO OUT connectors on the TV or other device. DVD EN 10 4 Use your SoundBar This section helps you use the SoundBar to play audio from connected devices. Before you start • Make the necessary connections described in the quick start guide or download the user manual from www. philips. com/ support. • Switch the SoundBar to the correct source for other devices. Equalizer Change the high frequency (treble) and low frequency (bass) settings of the SoundBar. 1 Press TREBLE +/- or BASS +/- to change the frequency. • Press RESET to reset your treble/ bass level to the default settings programmed at the factory. »» All Source indicators on the main unit blink twice when treble or bass is set to the maximum or minimum value. MP3 player Connect your MP3 player to play your audio files or music. • A 3. 5mm stereo audio cable. Adjust the volume 1 Press +/- to increase or decrease a volume level. »» All Source indicators on the main unit blink twice when a volume is set to the maximum or minimum value. 1 2 3 Using the 3. 5mm stereo audio cable, connect the MP3 player to the AUDIO-IN connector on your SoundBar. What you need • A Bluetooth device which supports Bluetooth profile A2DP, and with Bluetooth version as 2. 1 + EDR. • The operational range between the SoundBar and a Bluetooth device is approximately 10 meters (30 feet). •• The music streaming may be interrupted by obstacles between the device and SoundBar, such as wall, metallic casing that covers the device, or other devices nearby that operate in the same frequency. [. . . ] This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Warning: Changes or modifications made to this equipment not expressly approved by Philips may void the FCC authorization to operate this equipment. Model number: PHILIPS HTL2160/F7 Trade Name: Philips Responsible Party:P&F USA, Inc. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS HTL2160




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS HTL2160 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.