User manual PHILIPS LC434599

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS LC434599. We hope that this PHILIPS LC434599 user guide will be useful to you.


PHILIPS LC434599 : Download the complete user guide (2281 Ko)

You may also download the following manuals related to this product:

   PHILIPS LC434599 (2320 ko)
   PHILIPS LC434599 (2319 ko)

Manual abstract: user guide PHILIPS LC434599

Detailed instructions for use are in the User's Guide.

[. . . ] 23 Introduction Congratulations on your purchase of one of the most sophisticated and reliable products on the market today. We are sure that, used properly, it will bring you years of enjoyment. You will want to keep this manual handy, as it is a convenient source of information about your projector. For your own protection and prolonged operation of your projector, please read the `Important Safeguards' section before use. [. . . ] Connecting to a computer PC (Desk Top/Lap Top)/ MACINTOSH (Desk Top/Power Book/Power Mac) (b) Audio out USB R Audio in R L L Video S-Video Data out Data in (g) Data in Data out USB connection A USB interface is available via an upstream connector. When the projector's USB (upstream) connector is connected to a PC or an Apple Macintosh computer equipped with a USB downlink connection, it will identify as a USB device. It is possible to: ­ control the cursor of the computer via the projector remote control, ­ play audio information from the computer via the projector speaker, and ­ the display settings of the computer will be changed to fit the capability of the projector. projector 1 1 Mac/PC optional Philips VGA/MAC adapter USB Data out Data out A 1. Connect the Data out terminal of the computer to the Data in terminal (g) of the projector and secure the plugs by tightening the thumb screws. When connecting the projector to a Macintosh computer use the VGA/MAC adaptor (optional). Connect the USB (upstream) socket (b) of the projector to the USB downstream port of the computer. ­ You can now manipulate the mouse cursor on the computer and on the screen, using Cursor Control. Audio information from the computer will be played via the projector speaker. Note: If the mouse cursor does not react when moving the cursor control on the remote control: 3. Check that the Remote Control indicator on the projector flashes green when you move the trackball. ­ If it does not: Check that you have switched on the remote control. If you have, check that the batteries are installed properly and/or replace the batteries. ­ If it does: Make sure that the USB cable has been properly connected. Installation Connecting to video equipment Note: The figures in brackets (1) correspond to the figures in the accessories diagram. PAL, NTSC, SECAM (c) (d) Connecting to video equipment S-VHS (c) (e) Audio out USB R Audio in R L L Video S-Video Data out Data in D Da Audio out USB R Audio in R L L Video S-Video Data out Data in Data in Data out Projector (2) (optional) (3) Projector S-Video (2) VCR (3) 1. Connect the S-Video out socket of a S-VHS video recorder, Laser Disc player, video camera or TV to the S-Video socket (e) of the projector. Connect the Audio out L/R sockets of the S-VHS video recorder, Laser Disc player, video camera or TV to the Audio in L/R sockets (c) of the projector. For this, use the red and white audio connectors of the audio/video connection cable. Insert the white plug into the L socket and the red plug into the R socket. In case your VCR, Laser Disc player, video camera or TV is equipped with a Scart connector (depending on region): 1. Connect the Scart/RCA Audio Video adapter (3) supplied to the Scart connector of the VCR, Laser Disc player, video camera or TV. [. . . ] Use cursor control to select Settings in the Display Picture menu bar. Place the lamp holder in the guiding slots and insert into the lamp compartment. ER FILT Lamp counter 0 hours Lamp counter shows the operating hours of the lamp. Plug the projector back in by inserting the mains lead in the Power socket. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS LC434599




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS LC434599 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.