User manual PHILIPS PERFECT CARE AQUA GC8625

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS PERFECT CARE AQUA GC8625. We hope that this PHILIPS PERFECT CARE AQUA GC8625 user guide will be useful to you.


PHILIPS PERFECT CARE AQUA GC8625 : Download the complete user guide (2369 Ko)

Manual abstract: user guide PHILIPS PERFECT CARE AQUA GC8625

Detailed instructions for use are in the User's Guide.

[. . . ] Type of water to use This appliance has been designed to be used with tap water. If you live in an area with very hard water, fast scale build-up may occur. Therefore, it is recommended to use distilled or de-mineralized water to prolong the lifetime of the appliance. [. . . ] Ironing Please read the quick start guide on the packaging carefully to start using your appliance. Note: Keep the steam trigger pressed continuously when you move the iron over the fabric while you iron. Steam boost function (specific types only) Press the steam trigger twice quickly and release it for a high continuous steam output during 13 minutes. Hence you do not have to press the steam trigger continuously, which gives a more comfortable ironing experience. Indd 6 11/1/13 1:55 PM ENGLISH Energy saving - ECO mode By using the ECO mode (reduced amount of steam), you can save energy without compromising on the ironing result. Note: For the shortest ironing time, we advise you to use the ‘OptimalTemp’ mode. 2 To go back to the ‘OptimalTemp’ mode, press the ECO button again. Safety auto-off mode (specific types only) To save energy, the steam generator switches off automatically when it has not been used for 10 minutes. IMPORTANT - cleaning and maintenance Descaling the appliance 7 When DE-CALC light is flashing, perform the descaling procedure. Problem Dirty water, brown stains or white flakes come out of the soleplate. Possible cause Scale has built up inside the appliance because it has not been descaled regularly. Solution Descale the appliance (see chapter ‘IMPORTANT - cleaning and maintenance’, section ‘Descaling the appliance’). If you have already done so, follow the procedure in chapter ‘IMPORTANTcleaning and maintenance’, section ‘Descaling the soleplate’ to remove the chemicals. The appliance has not heated Wait until the iron ready light stays on up sufficiently. There is not enough water in Fill the water tank up to the MAX indication. Steam condenses into water in the hose when you use steam for the first time or have not used it for a long time. Steam has condensed on the ironing board cover after a long ironing session, or your board cover is not designed to cope with the high steam rate. We also advise you to use a layer of felt material in the board cover to prevent water droplets. [. . . ] The ironing board cover becomes wet, or there are water droplets on the floor/garment. Contact an authorised Philips service centre for a new EASY DE-CALC knob. Indd 8 11/1/13 1:55 PM ENGLISH Problem The iron does not heat up and the red DECALC light flashes. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS PERFECT CARE AQUA GC8625




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS PERFECT CARE AQUA GC8625 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.