User manual PHILIPS PQ226/18

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS PQ226/18. We hope that this PHILIPS PQ226/18 user guide will be useful to you.


PHILIPS PQ226/18 : Download the complete user guide (1248 Ko)

Manual abstract: user guide PHILIPS PQ226/18

Detailed instructions for use are in the User's Guide.

[. . . ] Charge, use and store the shaver at a temperature between 5°C and 35°C. Do not use the shaver in combination with pre-shave lotions, creams, foams, gels or other cosmetic products. General The adapter transforms 100-240 volts to a safe low voltage of less than 24 volts. Compliance with standards This Philips appliance complies with all standards regarding electromagnetic fields (EMF). [. . . ] €¯10) 4 Clean the inside of the shaving unit with the cleaning brush (Fig. Every two months: shaving heads Note: Do not use cleaning agents or alcohol to clean the shaving heads. 1 Switch off the shaver, remove the adapter from the wall socket and pull the small plug out of the shaver. 2 Press the release button (1) and pull the shaving unit in a straight upward movement off the shaver (2) (Fig. 3 Turn the orange wheel anticlockwise (1) and remove the retaining frame (2) (Fig. Each shaving head consists of a cutter and a guard (Fig. Note: Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored. 6 Clean the cutter with the shortbristled side of the cleaning brush. 7 Clean the guard with the long-bristled side of the cleaning brush (Fig. 8 Put the cutter back into the guard after cleaning (Fig. 9 Put the shaving heads back into the shaving unit (Fig. 10 Put the retaining frame back into the shaving unit (1) and turn the orange wheel clockwise (2) (Fig. Use and store the appliance at a temperature between 5°C and 35°C. 2 Put the protection cap on the shaver after use to prevent damage and to avoid dirt accumulation in the shaving heads (Fig. Note: Make sure that the lug of the protection cap covers the release button. Replacement Replace the shaving heads every two years for optimal shaving results. Replace damaged or worn shaving heads with Philips shaving heads only (HQ4+ for China or HQ56 for the rest of the world). For instructions on how to remove the shaving heads, see chapter ‘Cleaning and maintenance’, section ‘Every two months: shaving heads’. Ordering accessories To purchase accessories for this appliance,  please visit our online shop at www. If the online shop is not available in your country, go to your Philips dealer or a Philips service centre. If you have any difficulties obtaining accessories for your appliance, please contact the Philips Consumer Care Centre in your country. [. . . ] Make sure the battery is completely empty when you remove it. 1 Remove the adapter from the wall socket and pull the micro USB plug out of the shaver. 2 Let the shaver run until it stops and undo the screw at the back of the shaver (Fig. Do not connect the shaver to the mains again after you have removed the battery. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS PQ226/18




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS PQ226/18 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.