User manual PHILIPS PT920/18

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS PT920/18. We hope that this PHILIPS PT920/18 user guide will be useful to you.


PHILIPS PT920/18 : Download the complete user guide (20937 Ko)

You may also download the following manuals related to this product:

   PHILIPS PT920/18 (17135 ko)

Manual abstract: user guide PHILIPS PT920/18

Detailed instructions for use are in the User's Guide.

[. . . ] ақша 107 Lietuviškai 124 Latviešu 141 Polski 157 Română 174 Русский 191 Slovensky 208 Slovenščina 225 Srpski 241 Українська 258 6 English Introduction Congratulations on your purchase and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. Please read this user manual, as it contains information about the wonderful features of this shaver as well as some tips to make shaving easier and more enjoyable. €1) A Shaver 1 Protection cap 2 Shaving unit 3 Shaving unit release button 4 Trimmer 5 Trimmer release slide 6 Shaver on/off button 7 Shaving head symbol 8 Battery symbol B Charging stand (PT927/PT925/PT923/PT920/PT876/PT875 only) C Adapter D Jet Clean System (PT927CC/PT923CC only) 1 Locking lever 2 Shaver holder 3 Cleaning chamber release button 4 Jet Clean System on/off button 5 Cleaning symbol and ‘fluid low’ symbol 6 Battery symbol E Jet Clean solution (HQ200) F Cleaning brush G Storage pouch (PT927CC/PT927/PT925/PT923CC/PT920/PT876 only) Note:You can find the type number on the back of the shaver. [. . . ] Be careful not to hit the shaving unit against anything while shaking off excess water. Never dry the shaving unit and the hair chamber with a towel or tissue, as this may damage the shaving heads and the coupling spindles. 5 Open the shaving unit again and leave it open to let the shaver dry completely. Cleaning the shaving unit with the cleaning brush 1 Switch off the shaver and disconnect it from the mains. English 13 4 Turn the lock anticlockwise (A) and remove the retaining frame (B). Note: Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored. -- Remove the cutter from the shaving guard and clean it with the brush. Note: Make sure that the projections of the shaving heads fit exactly into the recesses. 7 Put the retaining frame back into the shaving unit (A)and turn the lock clockwise (B). 14 English 8 Insert the lug of the shaving unit into the slot in the top of the shaver. Note: If the shaving unit does not close smoothly, check if you have inserted the shaving heads properly and if the retaining frame is locked. Cleaning the shaving unit in the Jet Clean System (PT927CC/ PT923CC only) The Jet Clean System cleans the shaving unit. Preparing the Jet Clean System for use Note: Fill the cleaning chamber before first use and when the ‘fluid low’ symbol flashes to indicate that the fluid level is too low. When the fluid level drops below the minimum level, the cleaning symbol and the ‘fluid low’ symbol start to flash and the shaver holder returns to its starting position 1 Simultaneously press the release buttons on both sides of the cleaning chamber (A). 2 Unscrew the cap from the bottle with Jet Clean solution (HQ200) and remove the airtight seal. € 3 Fill the cleaning chamber with Jet Clean solution (HQ200) up to the MAX indication. note: Make sure the cleaning chamber is always filled above the MIN indication. 4 Place the Jet Clean System back onto the cleaning chamber (‘click’). When the cleaning chamber is filled with Jet Clean solution,  do not move it to prevent leakage. English 15 5 Put the small plug in the Jet Clean System and put the adapter in the wall socket. Using the Jet Clean System 1 Place the shaver without protection cap upside down in the shaver holder. [. . . ] €If you are unable to solve the problem with the information below, visit www. Com/support for a list of frequently asked questions or contact the Consumer Care Centre in your country. Possible cause The Jet Clean System (PT927CC/ PT923CC only) has not cleaned the shaver properly because the cleaning fluid in the cleaning chamber is soiled or the cleaning fluid level is too low. If necessary, clean and refill the cleaning chamber (see chapter ‘Cleaning and maintenance’). [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS PT920/18




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS PT920/18 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.