User manual PHILIPS SCD486/00

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS SCD486/00. We hope that this PHILIPS SCD486/00 user guide will be useful to you.


PHILIPS SCD486/00 : Download the complete user guide (7280 Ko)

You may also download the following manuals related to this product:

   PHILIPS SCD486/00 (756 ko)

Manual abstract: user guide PHILIPS SCD486/00

Detailed instructions for use are in the User's Guide.

[. . . ] WARNING: To prevent strangulation with the power cord, always keep the baby unit and the power cord out of baby’s reach, at least 1 meter/3. Caution: Risk of explosion, electric shock, short circuit, or leakage • The baby monitor shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the baby monitor. € Where the mains plug is used as the disconnect device, the disconnect device shall remain readily operable. € Before you connect the baby monitor to the mains, make sure that the voltage indicated on the adapters of the baby monitor corresponds to the local mains voltage. [. . . ] To set up the baby unit: 5 Use your baby monitor 1 Press 2 3 4 on the parent/baby unit. »» The parent/baby unit turns on, and all indicators on the parent/baby unit light up briefly. Set the parent unit and the baby unit to the same channel, either Channel 1 or Channel 2. »» The link indicator flashes red and the parent unit starts to search for the baby unit. »» When link is established, the link indicator lights up green. Tip •• Your baby monitor is specially designed to conceal the antenna in the top part of the parent unit. To avoid obstructions that may reduce the operating range, hold the parent unit at the base when carrying it. €• When the parent unit is out of range of the baby unit, the parent unit beeps from time to time. €• The battery indicator flashes red and a beep tone occurs 30 minutes before the batteries run out of power. When the batteries are completely empty, the parent unit automatically switches off and loses the link with the baby unit. 1 2 3 4 1 Before you connect the baby unit to the mains socket, remove the lid of the battery compartment. To set up the parent unit: Follow the same procedure as you do to set up the baby unit. 5 8 EN Operating range • • • Outdoors: up to 150 metres/500 feet Indoors: up to 50 metres/150 feet This monitor is designed to operate at its best within a 150 m range, suitable for most household environments. The operating range and quality of the connection varies depending on the number of obstructions, like walls or buildings, in between the two units. 6 Guarantee and service If you need service or information or if you have a problem, please visit the Philips AVENT website at www. Com/AVENT welcome or contact the Philips Consumer Care Centre in your country. You can find the phone number of the Philips Consumer Care Centre in the worldwide guarantee leaflet. If there is no Philips Consumer Care Centre in your country, please visit the local Philips dealer. Link an additional parent unit You can use multiple additional parent units with your baby monitor. Note •• Use the parent unit in the operating range of the baby monitor. »» The parent unit turns on, and all indicators on the parent unit light up briefly. Set the parent unit and the baby unit to the same channel, Channel 1 or Channel 2. [. . . ] As far as the law permits, we will not be liable for any loss or damage caused to property or persons arising from any cause whatsoever. In order to claim under this Additional Warranty you must telephone us on 1300 363 391 in Australia or 0800 658 224 in New Zealand within the Warranty Period. You will be asked for details of the Goods, a description of the defect and your personal details. Upon accepting your claim, we shall assist you with either returning the Goods to the Supplier for replacement or to the most convenient Philips Authorised Service Centre for your Goods to be repaired. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS SCD486/00




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS SCD486/00 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.