User manual PHILIPS SDV8622

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS SDV8622. We hope that this PHILIPS SDV8622 user guide will be useful to you.


PHILIPS SDV8622 : Download the complete user guide (3269 Ko)

You may also download the following manuals related to this product:

   PHILIPS SDV8622 (2487 ko)
   PHILIPS SDV8622 (3377 ko)
   PHILIPS SDV8622 (3273 ko)
   PHILIPS SDV8622 (3271 ko)
   PHILIPS SDV8622 (3268 ko)
   PHILIPS SDV8622 (3271 ko)
   PHILIPS SDV8622 (3239 ko)
   PHILIPS SDV8622 (2301 ko)
   PHILIPS SDV8622 (3262 ko)
   PHILIPS SDV8622 (3271 ko)
   PHILIPS SDV8622 (3254 ko)
   PHILIPS SDV8622 (3259 ko)
   PHILIPS SDV8622 (3264 ko)
   PHILIPS SDV8622 (3305 ko)
   PHILIPS SDV8622 (686 ko)
   PHILIPS SDV8622 (689 ko)
   PHILIPS SDV8622 (1194 ko)
   PHILIPS SDV8622 (3269 ko)
   PHILIPS SDV8622 (3267 ko)
   PHILIPS SDV8622 (1335 ko)

Manual abstract: user guide PHILIPS SDV8622

Detailed instructions for use are in the User's Guide.

[. . . ] Even the slightest touch of any of these parts to a power line can cause electrocution and death. If any part of the antenna system should come in contact with a power line, don't touch it or try to remove it yourself. [. . . ] com/welcome. EN 5 English What's in your box 1 2 3 4 1x 5 6 1x 7 1x 8 1x 2x 9 10 11 2x 12 4x 13 4x 1x 14 1x 4x 1x 1x a SDV8622/12 antenna b Power supply 100-240V AC / 6V DC 500mA c Wall/Mast bracket d Nut e U-Bolts f Mast clamps g Nuts with lock washers h 25mm wood screws i 6m coax cable with connectors j Weather boot k Power injector l Plastic anchors m Washer n 40mm Hexagon screw 6 EN Installation Installation information This antenna uses a power inserter module to powertheantennaamplifier. It is essential for proper operation of this antenna system that the power inserter be connected between the antenna and any devices such as splitters, matching transformers, networks, etc. Note · Indoor, choose a location near a window which gives the antenna a clear view of the transmitter. Note · Place the antenna away from metal surface to avoid interference. a For indoor wall mount installation Note b c d · Complete all assembly work on the ground before installing on a wall or an antenna mast. 1 Use the nut , washer , and hexagon screw to attach the antenna to the wall/mast bracket. a b c d Antennawithbuilt-inamplifier Power inserter module Splitters or matching transformers (not included) TV or video device EN 7 English 3 Get started Determine the signal strength Before Installation, determine the best location for optimum reception. It is important for the antenna to have an unobstructed path to the transmitter. For best results, ensure the antenna faces the location of the transmitter. 2 Use the screw holes of the wall/mast bracket as a guide to mark position for the wood screws. For outdoor mast mount installation Note · Complete all assembly work on the ground. Raise the completed antenna after assembly. 1 Use the nut , washer , and hexagon screw to attach the antenna to the wall/mast bracket. 3 Use the wood screws tofixthe antennatothewoodwallfirmly. 3. 2mm (1/8") 27±5mm 1. 1"±0. 2" 2 Insert U-bolts into the holes of the wall/mast bracket . Attach the four nuts with lock washers to the U-bolts . 7. 9mm (5/16") 35±5mm 1. 4"±0. 2" 8 EN 3 Attachtheassemblytothemastfirmly. Rotate English You can make a 90 degree rotation to the antenna or the mounting post. 4 5 Rotate the mast in its mount to adjust the direction. Attach the coaxial cable to the F connector on the underside of the unit. Position the weather boot over the connection. EN 9 Warning · The power injector and power supply are for indoor use only. Tip · This antenna includes a 6m roll of 3C-2V coaxial cable. If this is not adequate for your needs, replace the cable with a RG-6 coaxial cable instead of adding an extension. Set up a digital tuner with this antenna Connect to the TV Note · Aspreviouslynoted, theamplifier(Power injector + Power supply) must be placed inline between the antenna and any splitter or additional devices. You can install available channels with the digital TV tuner. Ensure the antenna has set up properly before the tuner can receive viewable channels. There are two ways to connect the antenna to the TV: · Connect the antenna to a digital tuner. [. . . ] Yes, this antenna can be set up with a digital tuner (see the section on "Set up a digital tuner with this antenna"). EN 11 English 6 Glossary A Amplifier A device, either a single stage or a large scale circuit with multiple stages for creating gain, i. e. Antenna A device, such as a rod or wire, which picks up a received radio frequency signal or radiates a transmitted RF signal. televisionsystems(standard-definitionTV, or SDTV). [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS SDV8622




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS SDV8622 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.