User manual PHILIPS SQM5572

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS SQM5572. We hope that this PHILIPS SQM5572 user guide will be useful to you.


PHILIPS SQM5572 : Download the complete user guide (1255 Ko)

Manual abstract: user guide PHILIPS SQM5572

Detailed instructions for use are in the User's Guide.

[. . . ] Designed to fit most brands of TV with a focus on safety and ease of use. Includes Easy 1-2-3 installation kit, complete with: all necessary hardware for mounting on different types of walls, mounting templates, stud finder and bubble level. [. . . ] Insert a Concrete Anchor (P) into each hole so that it is flush with the concrete surface. A hammer can be used to lightly tap the anchors into place if necessary. Place the mount back against the wall and secure it using the lag bolts (Q) and lag bolt washers (R) provided. Do not over-tighten these bolts and do not release the mount until all bolts are in place. Determine the correct length of bolt to use with your display by first examining the back of your display. Ifyourdisplayhasaflatback: You will use one of the shorter bolts (A, D, G, or J) from the hardware kit. Ifyourdisplayhasacurvedor recessedback:You will use one of the longer bolts (B, E, H, or K) along with a spacer (M or N). Determine the correct diameter of bolt to use by carefully trying one bolt each from Bags 1 - 4 of the hardware kit. Do not force any of the bolts ­ if you feel resistance stop immediately and try a smaller diameter bolt. Attach the arms to the back of your display using the bolts identified in Steps 1 and 2 along with the corresponding Lock Washer (C, F, I, or L). With the help of another person, carefully lift your display and place it on mount. Place the display in the middle of the mount, and do not release the display until the mounting arms have securely hooked onto the crossbars. [. . . ] Incidental, special and consequential damages are disclaimed where permitted by law. 6 To adjust the tilt position of your display, have one person hold the display in place while another person loosens the two tilt adjustment knobs located on either side of the mount. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS SQM5572




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS SQM5572 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.