User manual PHILIPS US2-PH61112

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS US2-PH61112. We hope that this PHILIPS US2-PH61112 user guide will be useful to you.


PHILIPS US2-PH61112 : Download the complete user guide (106 Ko)

You may also download the following manuals related to this product:

   PHILIPS US2-PH61112 (121 ko)

Manual abstract: user guide PHILIPS US2-PH61112

Detailed instructions for use are in the User's Guide.

[. . . ] INFO/SELECT button brings up DVD Display or Control Menu for Chapter/Track/Title number, Time remaining/elapsed indication, system information, etc. PLAY button is used to start Disc playback and for Menu selection on some DVD players. On the back of the remote, push down on the tab and lift the cover off. Match the batteries to the + and - marks inside the battery case, then insert 2 AAA Alkaline batteries. [. . . ] Please refer to "Programming with Code Search" on page 8 for more information on using the code search feature to learn how to search through the library of codes for your products. Press and hold the CODE SEARCH button until the red indicator stays on, then release the CODE SEARCH button. Note: If some buttons do not operate your equipment, try one of the other codes for your brand. If (for example) you want to store a VCR code under CABLE, first follow the procedure for Direct Code Entry (previous page) and press CABLE in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Note: If the device does not have a CHANNEL UP button, use PLAY (VCR only) or POWER instead. Code Search starts from the currently stored 4 digit number under that mode. Lets you search for a code for a specific Brand within the Code Library for a particular manufacturer. Press and hold the CODE SEARCH button until the red indicator remains on, then release CODE SEARCH button. Press the CHANNEL UP button ((or POWER or PLAY (VCR only)) repeatedly until the device to be controlled changes channel. If you accidentally overshoot the code required, press the CHANNEL DOWN button to backtrack through the library until the device changes channel. If your product does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following these steps. To turn the TV off, press and release the POWER button to transmit the Power Off button command. This method can be applied similarly to any device and is available for all Modes. PLAY, PAUSE, STOP, FF, REWIND, and REC) to Punch-Through control from any Mode programmed with TV, SAT or Cable codes to the last VCR, DVD or DVR programmed Mode you used. Normally other types of remotes only punch-through (from another Mode) on the 6 VCR buttons to the device programmed under the VCR Mode button. This is not much use if you are using a DVD programmed under a Mode other than VCR. For example, if you have 2 DVD, VCR or DVR devices programmed into this remote, the last one you accessed on the remote will be the one that has control of the 6 VCR transport buttons when in any other Mode. This feature will not operate if the programmed TV, SAT or Cable code has its own VCR transport button control e. Volume/Mute Control and Punch-Through Feature This remote lets you select which device Mode controls your Volume/Mute buttons. If the programmed "Visual" code has no Volume/Mute operation of its own then those buttons will punchthrough control to the TV Mode device without needing to change to TV Mode. Any Mode chosen for Volume/Mute control MUST have its own Volume/Mute function or the Volume/Mute buttons will do nothing. Setting ALL Volume/Mute Control to any one Mode This routine can set all Modes to "punch-through" to any one chosen Mode for Volume/Mute button control without the needing to change to that Mode. [. . . ] Press and hold the CODE SEARCH button until the red indicator turns on, then release the button. Press and hold the MUTE button until the red indicator blinks off, then release the button. Press and release the VOLUME- (Down) button, the red indicator blinks then stays on. All "Visual" and "Audio" programmed Modes will now punch-through to the respective Modes you have chosen for Volume/Mute control. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS US2-PH61112




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS US2-PH61112 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.