User manual PLANET ATA-150S

[. . . ] VoIP Analog Telephone Adapter ATA-150/ATA-150S User's manual Version 1. 0. 1 -1- Copyright Copyright (C) 2009 PLANET Technology Corp. The products and programs described in this User's Manual are licensed products of PLANET Technology, This User's Manual contains proprietary information protected by copyright, and this User's Manual and all accompanying hardware, software, and documentation are copyrighted. No part of this User's Manual may be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form by any means by electronic or mechanical. Including photocopying, recording, or information storage and retrieval systems, for any purpose other than the purchaser's personal use, and without the prior express written permission of PLANET Technology. Disclaimer PLANET Technology does not warrant that the hardware will work properly in all environments and applications, and makes no warranty and representation, either implied or expressed, with respect to the quality, performance, merchantability, or fitness for a particular purpose. [. . . ] Default : 5060 Register Status Here will display SIP account register status. - 22 - - NAT Traversal Stun Check to enable STUN function. Default : Disable Stun Server Addr If user enables STUN function, please input STUN Server address. Default : Null Stun Server Port If user enables STUN function, please input STUN Server port. Default : 3478 - SIP Advanced SIP Port Set local SIP listening port. Default : 9000 DMTF Relay Select DTMF Relay to be In band, RFC 2833, or SIP INFO. Default : Inband RFC2833 Payload Type If user select DTMF as RFC 2833 type, here can modify RFC 2833 payload type. Default : 96 - 23 - SIP INFO Duration (ms) If user select DTMF as SIP INFO type, here can modify SIP INFO duration. Default : 250 Call Waiting Check to enable Call Waiting function. Default : Enable Call Waiting Caller ID Check to enable call waiting caller ID function. If this function is enabled, caller ID will display when having waiting call. Default : Disable Reject Direct IP Call Check to enable Reject Direct IP Call. If this function is enabled, ATA will to reject the incoming peer to peer call. Default : Disable - Forward Mode Immediate Forward to This is unconditional forward setting. Default : Off Immediate Number Enter the assigned number for Immediate forward. Default : Null Busy Forward to Check to enable Busy Forward function. When phone is busy, incoming call will be forwarded to assigned number. Default : Off Busy Number Enter the assigned number for busy forward. Default : Null - 24 - No Answer Forward to Check to enable no answer forward function. When phone is not answered for a period of time, incoming call will be forwarded to assigned number. Default : Off No Answer Number Enter assigned number for no answer forward. Once phone is not picked up after this time, incoming call be will forwarded to assigned number. Press this speed dial number and followed by # can dial out assigned phone number. Name Phone Number Select Name of this speed dial. [. . . ] ATA _A had set Call Forward function to ATA _B. Machine configuration on the ATA: Please log in ATA_A via web browser, browse to the Phone 1/2 menu and select the Call Forward config menu. In the setting page, please enable the All Forward function and fill in the IP address of ATA_B in All Fwd No. field, then the sample configuration screen is shown below: Test the scenario: 1. Because ATA_A had set up Immediate Forward to function to the IP Address 192. 168. 0. 2 (ATA_B) 4. [. . . ]