User manual ROLLEI DK3000

[. . . ] If you are drawing power from a household electric outlet, be sure to unplug the power cord. Keep the battery and SD memory card used in this camera out of the reach of children to prevent accidental ingestion. 1 Specification General Video Signal Protocol Power Source Dimensions (WxHxD) Weight Operating Conditions Storage Temperature NTSC / PAL Rechargeable Lithium-Ion Battery 3. 7V / AC Adapter 5V 116. 7 x 53. 8 x 29. 5 mm (4. 5" x 2. 1" x 11. 6) Approx. 172g (6. 0 oz) (without battery) Temperature: 0°C to 40°C (32°F to 104°F) Humidity: 85% or less -20°C ~ 60°C (-4°F to 140°F) Memory Media Internal Memory Memory Card 16 MB Secure Digital Memory Card Slot 2 Camera 1/2. 7 inch 3. 34 mega pixels Zoom Lens F2. 8 ~ 3. 8 f = 5. 9 ~ 11. 8 mm (equivalent to 38 ~ 76 mm in 35 mm format ) Shooting Range General: Approx. 7 ~ 14 cm (2. 75" to 5. 5") (at Wide) Digital Zoom 2X Monitor 1. 5 inch LTPS TFT color LCD White Balance Auto / Preset (Daylight, Overcast, Fluorescent Light, Tungsten Light) Exposure Exposure Metering System: Center-weighted Compensation Mode: Auto /Manual compensation (± 2. 0EV in 0. 5 EV steps) Metering: TTL CCD method Shutter Speed 4, 2, 1 ~ 1/ 1000 ISO Sensitivity Auto, ISO 200, ISO 400 Built-in Flash Modes: Flash Off, Forced, Auto, Slow Synchro, Red-eye Reduction Still Picture: 2848 x 2136 / 2048 x 1536 / Image Resolution 1600 x 1200/ 1280 x 960 Motion Picture:320 x 240 File Format JPEG (Exif2. 1), TIFF, AVI CCD Lens Focal Length 3 Names of Parts Camera a. [. . . ] Press or button to select the compensation level and press ENTER button. Press shutter release button. White Balance : The white balance can be adjusted so that images can be recorded in natural colors no matter what light source the subject is exposed. There are 5 modes can be chose: Auto (default and no display), Daylight ( Overcast ( ), Tungsten Light ( , , or ), and Fluorescent Light ( ), ). 1. Check that ] and press MENU button. has been selected and press ENTER button. 3. Slow playback To play a file slowly, press Attention button during playback. : If an unplayable is encounted, the "UNMATCHED FILE" message will be displayed. In some case, data recorded with the cameras of other companies cannot be played back. 16 Playing File on a TV Connecting 1. Open the Video Out Terminal cover and connect the Video Out Cable to the terminal. Connect the other end of the Video Out Cable to the Video-In Terminal of the TV. Turn the camera on and set the mode dial to Playback Mode [ ]. Disconnecting 1. Disconnect the cable. 3 17 Various Playback Functions Thumbnail Playback This function enables user to play 9-file at once for quick searching. and press ENTER button. The screen will change to the thumbnail display. 5/26 100-0005 1600 Indicator No Mark Status Still picture Motion Picture File Unplayable File 2002/07/15 11:25 ? 3. Press , , , buttons to select file. 5/26 100-0005 1600 The file on which the focus is set is the selected file. 2002/07/15 11:25 4. Press ENTER button , the screen will return to single image display. Zoom Playback 1. and press ENTER button. button to change the magnification. Note Image of 2848 x 2136 can not be played back by using Zoom Playback Function. 18 To move the display position Press DISPLAY button, than use zoom playback screen. Press DISPLAY button again to return to the Protecting a File This function enables the user to protect important files. Protecting / Unprotecting a Single File or All Files 1. to select [ ALL FILES ] PROTECT ] and press PROTECT [ CANCLE FILES ], [ ONE FILE ] and press the ENTER button. ALL FILES CANCEL ALL ONE FILE MENU 4. Protecting a File / All Files: the setting will be enabled and the display will return to the protect screen. Unprotecting a file / All Files: If you select [CANCLE FILES] and press the ENTER button when a file has already been protected, it will be unprotected. 3 19 Other Advance Functions under [ MENU ] in Playback Mode Auto Playback This function allows user to select playback time (1 SEC. Press button to select MENU and press or button to select button. MODE SETTING AUTO PLAY 1SEC. SEL. :ENTER CANCEL: ] and press MODE SETTING AUTO PLAY DPOF DELETE ALL ENTER button. BACK:CANCEL SELECT: [ AUTO PLA ] and press Y 4. Press or button to select the playback time and press ENTER button. DPOF 1. or button to select [ DPOF ] and press button. DPOF menu will be displayed. MODE SETTING AUTO PLAY DPOF DELETE ALL DPOF STND PRINTS INDEX PRINTS CANCEL DPOF CONFIRM 0 BACK:CANCEL SELECT: BACK:CANCEL SELECT: Press or to select [ STND PRINTS ], [ INDEX PRINTS ], [ CANCEL DPOF ], [ CONFIRM ] on the DPOF menu and press button, then works on the funtion as below : 20 Specifying the Number of Prints 1. [. . . ] User must turn off the Application Software first before disconnect the 28 cable. Warning Message If the warning message is displayed on the LCD monitor, follow the procedures below. Message NO CARD FORMAT CARD CARD ERROR Remedy No card has been inserted. Use another card. CARD PROTECTED INSUFFICIENT MEMORY Card write-protect is set on [ LOCK ]. Delete unwanted files or format card to ensure sufficient memory space. [. . . ]