User manual ROLLEI NANO 80

[. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Use of shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC rules. Do not make any changes or modifications to the equipment unless otherwise specified in the manual. [. . . ] Press the A press of the / buttons during playback allows fast forward play / fast reverse play. To cancel pause, press the Video clips cannot be displayed rotated or enlarged. Windows Media player or QuickTime Player is recommended to play back the video clip on your computer. QuickTime Player is a free media player available at www. apple. com; and compatible with Mac and Windows computers. For more information about the operation of the media player, refer to its respective help documentation. EN-20 PLAYBACK MODE Playing Back Still Images You can play back the still images on the LCD monitor. The images can be displayed in forward or reverse sequence with the / buttons. Pressing the button during image playback will result in a 90-degree clockwise rotation display. To return to normal magnification, slide the zoom lever to side. f s a An [ ] icon is displayed with the video data. An [ ] icon is displayed with images which have an audio memo recorded. EN-21 Thumbnail Display This function allows you to view thumbnail images on the LCD monitor so you may search for a particular image/video clip/audio file. Press the button to exit from the thumbnail display. 100-0001 100-0001 100-0002 100-0002 100-0003 100-0003 100-0004 100-0004 100-0005 100-0005 100-0006 100-0006 100-0007 100-0007 Removing Red-eye You can use this function to remove the red-eye effect after an image is taken. To save your corrected image, select [Confirm] with the / buttons, and press the button. Use of this is convenient when the white balance does not offer a good match. Before selecting [Execute] and before taking your image, place a white paper in the scene and set the white balance manually. * Cancel / Execute ISO This sets the sensitivity for capturing images. When the sensitivity is raised (and the ISO figure is increased), photography will become possible even in dark locations, but the more pixelated (grainier) the image will appear. * [Blank] Auto * [ 4 ] ISO 80 *[ ] ISO 100 *[ ] ISO 200 *[ ] ISO 400 *[ ] ISO 800 *[ ] ISO 1000 Metering This sets the metering method for calculating the exposure. * Center: Averages the light metered from the entire frame, but gives greater weight to the subject matter at the center. * Multi: The entire area of the screen is measured, and the exposure is calculated. * Spot: A very small portion of the center of the screen is measured to calculate the correct exposure. * Normal / Vivid / Sepia / Monochrome / Blue / Red / Green / Yellow / Purple EN-28 Capture Mode This sets the recording method at the time of capturing images. * [Blank] Single: Captures one image at a time. *[ *[ *[ ] ] ] Continuous: Permits continuous capture of up to 3 images. AEB: Permits 3 consecutive images in the order of standard exposure, underexposure and overexposure compensation. Burst:Permits continuous photography while pressing holding the shutter button. [. . . ] [Date Print]:According to the printer type, select whether you want to print the image with date imprint or not. [Paper Size]:Select the desired paper size according to the printer type. [Layout]:Select the desired printing layout according to the printer type. [Print]:After all settings are configured, select this item to start printing. [. . . ]