User manual ROLLEI XS-8

[. . . ] Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] Select [Protect] with the / buttons from the playback menu, and press the button. the The removal of image protection is executed and the camera returns to the playback mode. Protecting multiple images simultaneously 1. Select [Protect] with the / buttons from the playback menu, and press the button. Select the image you want to protect with the / buttons, and press the button. Select [Execute] with the / buttons, and press the Protection is executed and the camera returns to playback mode. Formatting an SD/SDHC memory card overrides protection, and erases all images regardless of their protected status. EN-24 DPOF Settings DPOF is the abbreviation for Digital Print Order Format, which allows you to embed printing information on your memory card. You can select the images to be printed and how many prints to make with the DPOF menu in the camera and insert the memory card to the card compatible printer. When the printer starts printing, it will read the embedded information on the memory card and print the specified images. Select date to [On] or [Off] with the / buttons, and press the button. This creates a file containing the DPOF information, and when the operation is finished, the screen returns to the playback mode. The DPOF icon [ ] is displayed on each image that has set up DPOF settings. x 1 E 100- 0001 The date that is printed on the image is the date set on the camera. To print the correct date on the image, set the date on the camera before you capture the image. Refer to section in this manual titled "Setting the Date and Time" for further details. EN-25 Erasing Images Erasing single image / Erasing all images 1. To not erase, select [Cancel], and press the button. Erasing selected images This erases a number of selected images. Select the image you want to erase with the / buttons, and press the button. Repeat this procedure and select all the images that you want to erase. Select [Execute] with the / buttons, and press the button. 6 Deleting an image will not affect sequential image numbering. For example, if you delete image number 240, the next captured image will be numbered 241 even though 240 no longer exists. In other words, an image-number is retired when an image is deleted and will not be reused or reassigned to another subsequently captured image. EN-26 MENU OPTIONS Capture Menu This menu is for the basic settings to be used when capturing still images. 1. Press the button, and select the [Capture] / [Function] menu with the / buttons. Select the desired option item with the / buttons, and press the button to enter its respective menu. Scene Mode Select from 21 different scene modes in accordance with the shooting conditions. * Program AE / Smile Shot / Anti Shake / Panorama / Portrait Man / Portrait Lady / Landscape / Sports / Night Portrait / Night Scene / Candlelight / Fireworks / Text / Sunset / Sunrise / Splash Water / Flow Water / Snow / Beach / Pets / User Setting Size This sets the size of the image that will be captured. *[ *[ *[ *[ *[ ] 3264 x 2448 ] 2816 x 2112 ] 2272 x 1704 ] 1600 x 1200 ] 640 x 480 Quality This sets the quality (compression) at which the image is captured. *[ *[ *[ ] Fine ] Standard ] Economy Sharpness This sets the sharpness of the image that will be captured. * Hard / Normal / Soft EN-27 Saturation This sets the saturation of the image that will be captured. * High / Normal / Low White Balance This sets the white balance for a variety of lighting conditions and permits images to be captured that approach the conditions that are seen by the human eye. * [ Blank ] Auto *[ ] Incandescent *[ ] Fluorescent 1 *[ ] Fluorescent 2 *[ ] Daylight *[ ] Cloudy *[ ] Manual Manual WB This manually sets the white balance and stores it. [. . . ] Select [Single], [All] or [DPOF] with the / buttons, and press the button. If you select [Single] in the previous step, the figure shown on the right hand side will appear. After selecting the desired image and printing number, press the button to confirm. Select [Print] with the / buttons, and press the button to start printing. 6. [. . . ]