User manual SABINE NAVIGATOR NAV4802

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SABINE NAVIGATOR NAV4802. We hope that this SABINE NAVIGATOR NAV4802 user guide will be useful to you.


SABINE NAVIGATOR NAV4802 : Download the complete user guide (244 Ko)

Manual abstract: user guide SABINE NAVIGATOR NAV4802

Detailed instructions for use are in the User's Guide.

[. . . ] ARCHITECTS' and ENGINEERS' SPECIFICATION 2008 NAVIGATOR NAV4802 System Processor The loudspeaker controller/matrix mixer/parametric equalizer/automatic feedback controller/compressor/limiter/ delay/crossover/signal router shall be a four input / eight output digital signal processor, programmable from the front panel or with provided Windows software, Navigator Remote, including linkable functions and remote programming. The unit shall automatically sense feedback and determine its pitch, then assign a digital notch filter to the resonating frequency to automatically eliminate the feedback. [. . . ] The unit shall also be provided with the following front panel connectors: USB and RS232. The back panel will have 3-pin XLR connectors for each input and output; RJ45 Ethernet connector; power connector with bulti-in fuse holder. The following performance criteria shall be met: FBX/PARAMETRIC FILTERS -- Eight independent digital notch filters controlled automatically or parametrically from 20 Hz to 20 kHz, each switchable between FBX fixed filters, FBX dynamic filters, shelving filters, and parametric filters. High and low shelf filters: user-controllable cutoff points between 20 Hz and 20 kHz, and 6 or 12 dB/octave roll-off. parametric filter depth: user-controllable in 1 dB steps from +15 dB to -30 dB (parametric mode), 3 dB steps from 0 dB to -40 dB (FBX mode), maximum automatic depth adjustable from -6 to -40 dB. Filter width: user-controllable from 2. 50 octave to . 02 octave (parametric), 1. 0 to . 02 oct. Time required to find and eliminate feedback: user-controllable from 0. 1 seconds to 5 seconds (typically 0. 3 seconds). Total number of combined filters active: user selectable, 0-8 per output and 0-8 per input. CROSSOVER: Two filters per output; Bessel, LinkwitzReily, or Butterworth filters; 12, 24, 36, 48 dB/octave slopes. COMPRESSOR/LIMITER -- Threshold: +20dBu to -20dBu in 0. 5 dB steps (independently adjustable for compressor & limiter). [. . . ] NAV4802DR: Includes Digital I/O and Remote Control; NAV4802MR: Includes Mic Preamp and Remote Control; NAV4802-DM: Includes Digital I/O and Mic Preamp. © 2008 Sabine, Inc Sabine, Inc. 13301 NW US Highway 441 Alachua, FL 32615-8544 (386) 418-2000 Fax: (386) 418-2001 Sabine. com 2008 Pro Audio Binder-Arch-Specs-080218. indd - ks [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SABINE NAVIGATOR NAV4802




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SABINE NAVIGATOR NAV4802 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.