User manual SABINE NAVRC-100

[. . . ] SUMMARY OF FEATURES 13301 US Highway 441 Alachua, FL 32615 Phone (386) 418-2000 Fax (386) 418-2001 www. Sabine. com SUMMARY OF FEATURES SECTION NINE: APPENDICES CONFORMITY EC NINE: APPENDICES SECTION - DECLARATION OF EC - DECLARATION OF CONFORMITY CE MARKING We, the Manufacturer SABINE, INC. 13301 NW US HIGHWAY 441 ALACHUA, FLORIDA USA declare that the product EQUALIZER SABINE MODEL NAVIGATOR Is in conformity with Council Directive: 73/23/EEC and 89/336/EEC (EMC Directives) Standards to which conformity is declared: EN 60065: 1993 EN 60742: 1995 EN 55103-1: 1997 EN 55022: 08:94 + a1:05:05 EN 55103-2: 1997 Manufacturer's Signature: Date: SEPTEMBER 30, 2005 Name: Doran Oster, Sabine President DECLARATION OF CONFORMITY SUMMARY OF FEATURES NAV240-U (2 x 4 System Processor) NAV360-U (3 x 6 System Processor) NAV480-U (4 x 8 System Processor) NAV4802-U (4 x 8 System Processor, with Ethernet) NAV8802-U (8 x 8 System Processor, with Ethernet) NAV4802-DA-U (4 x 8 System Processor, with Ethernet and AES Digital I/O) NAV8802-DA-U (8 x 8 System Processor, with Ethernet and AES Digital I/O) NAV4802-RC-U (4 x 8 System Processor, with Ethernet and Wall Panel Interface) NAV8802-RC-U (8 x 8 System Processor, with Ethernet and Wall Panel Interface) NAVRC-100 · · · · · · · · · · · · · · · · · · · · · · (Wall-mounted remote control panel [requires -RC Series Navigator]) Navigator2 Remote for WindowsTM Software included with every unit; runs up to 16 Navigators Full front panel control 24-bit A/D and D/A conversion, 40-bit extended processing 20 to 20 KHz Frequency Response +18 dBu Maximum Signal Input & Output Floating Point SHARC Processor 115 dB dynamic range Precise control of Level and Polarity Parametric Filters: up to 8 filters, numeric or graphic control Crossover: Bessel, Butterworth, and Linkwitz Riley filters; slopes to 48 dB/octave High Shelf Filter (3KHz to 20KHz) and Low Shelf Filter (20 Hz to 1KHz) FBX Feedback Exterminator: 8 Filters, with Setup Mode Compressor/Limiter, with controls for ratio, threshold, attack, release, and gain Digital Delay, up to 650 (80 on 240, 360, &480) msec delay, adjustable in 21 microsecond increments Bypass: dedicated switches for all functions Channel Select buttons that toggle between Mute and Edit, with easy linking LED Indicators: Edit, Mute, Level LCD Display: All parameters and status displays Store up to 30 programs Multiple levels of password security Front panel RS232 and USB connections for computer control XLR inputs & outputs; Phoenix on 8802 units Ethernet connection (4802 and 8802 units only) Each Input/Output channel provides Back Panel: Navigator Remote Software Features: All front panel controls, plus more, including: · · · · · · Graphic filter adjustments Password protection View & edit frequency response curves Store and recall files, setups, programs Control and link up to 16 Navigators (4802 and 8802 units only) Future-proof FREE Flash RAM upgrade capability: upgrade your firmware and software using Sabine's Navigator Upgrade Wizard Wall-Mounted Remote Control Panel Navigator System Processors: Digital Input/Output Option Navigator Optional Hardward and Software Features · · Operating Guide Version 1. 0 for 2007 Sabine Navigators with: Navigator Firmware Version 6. 0 and up · Navigator Remote Software Version 6. 0 and up NOTES 4 TABLE OF CONTENTS Table of Contents Notes Summary of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Section One: Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Section Two: Front & Back Panel Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] This will clean out previous settings for devices no longer attached to your computer and may allow the Navigator software to locate your unit(s). NOTE: COM Port Properties & Settings (Bits per second, Data bits, Parity, Stop bits & Flow control) are controlled by the Navigator Software and need not be adjusted. 24 SECTION SIX: USING NAVIGATOR REMOTE CONTROL SOFTWARE 6. 3. INSTALLING AND USING THE SOFTWARE Follow the on screen instructions for installing the Sabine Remote Control Software for the Navigator. If you are using the Navigator in a network see Section 6. 7 for details. After the installation you should have a Navigator software icon on your desktop. This will come in handy when you want to upgrade the firmware in your Navigator. For connecting via RS232 or USB: Press the Global button and then the >Menu key to get to the Comm Menu. The port should be RS232/USB; the baud rate should be 115200; the device number should be #1. For connecting via Ethernet: Press the Global button and then the >Menu key to get to the Comm Menu. The port should be CAT-5; the baud rate should be 115200; the device number should be unique in each Navigator within your Navigator network. Patch the serial connection to your computer using a standard 9-pin RS232 serial cable or USB cable and run the Navigator Software. If you are using an Ethernet connection patch your Ethernet cable from your network switch to the connector on the back of the Navigator. The opening screen allows you to choose the Live Mode for connecting to the Navigator or Design Mode for offline editing while not connected to a Navigator. In the Connection Setup screen choose your comm port (RS232/USB) or IP numbers (network) for the device number you are using (device numbers can be changed in the Navigator unit in the Global Parameters: General menu on the front panel). For connecting to one Navigator select Device 1, and select RS232/USB. NOTE: If you are using USB as your connection please read the Tech Tip on the preceding page for important information on finding the correct COM port for your USB connection. With the proper COM port (or IP numbers) selected to which you patched your Navigator (usually com 1 or 2) click the "Connect!" button. Your unit is connected when the System Status display on the upper left of the main screen shows "Up Sync OK" or "Link OK. " Refer to the illustrations on the following page for a look at the connection status screens. If you have any trouble connecting, see the Tech Tip on this and the previous page. Once you are connected you can proceed to use all the powerful features of the Navigator. For a basic explanation of all controls on the main screen, please see the following page. 6. 4 UPGRADING NAVIGATOR FIRMWARE AND SOFTWARE The firmware is the internal operating system of your Navigator unit. Software is the program you install on your computer to control the Navigator. You can do this any time in order to get any recent improvements or added features. [. . . ] The serial number affixed to the product is altered, defaced or removed; or e. In the event of a defect in material and/or workmanship covered by this limited warranty, Sabine will repair the defect in material or workmanship or replace the product, at Sabine's option; and provided, however, that, in any case, all costs of shipping, if necessary, are paid by you, the purchaser. THE WARRANTY REGISTRATION CARD SHOULD BE ACCURATELY COMPLETED, MAILED TO AND RECEIVED BY SABINE WITHIN FOURTEEN (14) DAYS FROM THE DATE OF YOUR PURCHASE. Bring the defective item to any Authorized SABINE DEALER and present therewith the ORIGINAL PROOF OF PURCHASE supplied to you by the AUTHORIZED SABINE DEALER in connection with your purchase from him of this product. [. . . ]