User manual SAMSUNG S85

[. . . ] Set up the camera driver Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in Application software CD-ROM. (p. 94) Getting to Know your camera Thank you for buying a Samsung Digital Camera. If you require After Sales service, please bring the camera and the cause of the camera malfunction (such as battery, Memory card etc. ) to the A/S centre. [. . . ] However, values for DATE / TIME, LANGUAGE, and VIDEO OUT will not be changed. Select the [Yes] menu and all settings will be restored to their defaults. SETUP 2 Quick View Power Off LCD Save Video Out Format Reset Back No Yes OK Set SETUP 2 Quick View Power Off LCD Save Video Out Format Reset Back No Yes OK Set Selecting a battery type Be sure to run [Format] on the following types of memory card. - A new memory card, or an unformatted memory card - A memory card that has a file this camera can't recognise or one that has been taken from another camera. If you insert a memory card that has been formatted using other cameras, memory card readers, or PCs, you will get a [Card Error!] message. If a battery type is selected, the camera will be optimized according to the selected battery type. [Battery Type] sub Menu : Alkaline / Ni-MH SETUP 2 Power Off LCD Save Video Out Format Reset Battery Type Back Alkaline Ni-MH OK Set 56 _SETUP Starting play mode Turn the camera on and select Play mode by pressing the play mode button ( ). If the memory card is inserted in the camera, all the camera functions apply only to the memory card. If the memory card is not inserted in the camera, all the camera functions apply only to the internal memory. Playing back a movie clip 1. Select the recorded movie clip that you want to play back by using the Left/Right button. Press the play & pause button ( ) to play back a movie clip file. - To pause a movie clip file while playing it back, press the play & pause button again. - Pressing the play & pause button( ) again will cause the movie clip file to restart. - To rewind the movie clip while it is playing, press the Left button. - To stop playback of the movie clip, press the play & pause button, and then press the Left or Right button. Play E Capture 04 PLAY Playing back a still image 1. The last image stored on the memory is displayed on the LCD monitor. 3. Select an image that you want to view by pressing the Left/ Right button. Press and hold the Left or Right button to play back the images quickly. PLAY_ 57 Starting play mode Movie clip capture function You can capture still images from the movie clip. The captured movie clip file is the same size as the original movie clip (640x480, 320x240). When you press the E button at the beginning of the movie clip, the first frame of the movie clip will be saved as a still image. On camera movie trimming You can extract desired frames of movie clip during the movie clip play back. If the running time is under 10 seconds, the movie clip can't be trimmed. Press the Pause button( ) at the point of the movie clip where you want to start extracting. Press the Play & Pause button( ) and the extracted range will be displayed on the status bar. [. . . ] When the camera is connected to the USB port located on the front of the computer, the computer may not recognise the camera. Connect the camera to the USB port located on the back of the computer. 104 _SOFTWARE FAQ When the DirectX 9. 0 or later is not installed Install the DirectX 9. 0 or later 1) Insert the CD provided with the camera 2) Run the windows explorer and select the [CD-ROM drive:\ USB Driver\DirectX 9. 0] folder and click the DXSETUP. exe file. Visit the following site for downloading the DirectX. http://www. microsoft. com/directx If a PC (Windows 98SE) stops responding while the camera and PC are connected repeatedly If a PC (Windows 98SE) is turned on for a long time and the camera is connected repeatedly, the PC may not recognise the camera. If a PC connected with the camera stops responding while Windows is starting. [. . . ]