User manual SAMSUNG SC20F70HB

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SAMSUNG SC20F70HB. We hope that this SAMSUNG SC20F70HB user guide will be useful to you.


SAMSUNG SC20F70HB : Download the complete user guide (10381 Ko)

Manual abstract: user guide SAMSUNG SC20F70HB

Detailed instructions for use are in the User's Guide.

[. . . ] • Avoid picking up hard, sharp objects with the vacuum cleaner as they may damage the cleaner parts. • Switch the vacuum cleaner off on the body of the machine before unplugging from the electrical outlet. Disconnect the plug from the electrical outlet before emptying the dust bin. To avoid damage, please remove the plug by grasping the plug itself, not by pulling on the cord. [. . . ] If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. Turn off the power switch before unplugging. • • • • • • • UV BRUSH • Since the UV rays from the UV Brush damage skin and eyes, never allow the rays to make contact with skin or eyes and do not let children or the elderly use the UV Brush. • If the transparent window is broken and the UV rays are exposed directly, turn the power off and contact the service center. • Do not use the UV Brush for purposes other than the sterilization of mattresses, bedclothes, beds, cushions and so on made from material. The company will not be held liable for any loss due to accidents from using the UV Brush for purposes other than its original purpose as listed above. safety information _05 • Do not sit on the UV Brush or drop it, and avoid imparting impacts on the product. • Do not touch the power terminals on the back of the UV Brush with a metal pin or rod. • When the UV lamp is out of order, never disassemble or modify the product yourself. • Since an internal discharge occurs within the UV Brush, never use the product near an inflammable spray or substance. • Take care not to touch the UV lamp window after using the UV Brush for an extended period of time as the surface of the window may be hot. • The UV Brush may start slowly at a low temperature due to the inherent characteristics of UV lamps. Please keep the UV Brush indoors. 06_ safety information contents ASSEMBLING THE CLEANER 08 OPERATING THE CLEANER 09 09 09 10 12 13 Power cord ON/OFF Switch Power control Using the UV brush (SC20F70U Series) Using the Dust Sensor (Option) TOOLS AND MAINTENANCE FILTER 15 TROUBLESHOOTING 15 17 20 20 21 22 23 24 25 Using accessory Maintain floor tools Cleaning the Dust Sensor (Option) Emptying the dust bin Clean the Grille Clean the dust bin with water Cleaning the dust filter Cleaning the dust filter Cleaning the outlet filter 26 contents _07 assembling the cleaner OPTION • For storage, park the floor nozzle. • Red : When the amount of sucked in dust is large. operating the • The dust sensor is automatically turned on when the cleaner runs and turned off when the cleaner is stopped. • Since the dust sensor runs on battery power, there is no separate switch. cleaner Installing the Batteries 1 2 Check the polarities 3 • If the dust sensor doesn’t work even after cleaning the sensor, replace the batteries with new ones. • When you are not using the product for an extended period of time, separate the batteries. CAUTION operating the cleaner _13 Cleaning the dust sensor (Option) • Since the dust sensor consists of sensitive electronic devices, if water or other liquids enters the sensor, it may cause a problem. • If you use athe dust sensor without closing the battery compartment cover, pollutants such as dust may accumulate in the compartment and cause a problem. Therefore, be sure to use the product with the compartment cover closed. • Take care when you use the cleaner because the dust sensor may malfunction or may break due to an impact. Dust Sensor (2 EA) Installing the Dust Sensor • Assemble the dust sensor between the air inlet connector on the neck of the brush and the extension pipe. (Recommended) You can assemble the dust sensor between the extension pipe and the hose. The assembly position of the dust sensor 14_ operating the cleaner tools and maintenance filter USING ACCESSORY Pipe • Adjust the length of the telescopic pipe by sliding the length control button located in the center of the telescopic pipe back and forth. 03 tools and • To check for blockages, separate the telescopic pipe and adjust to shorten. maintenance filter Accessory (Option) • Pull out the button, to use the dusting brush. • To use the crevice tool, push the accessory on to the end of the hose handle in the opposite direction. tools and maintenance filter _15 Accessories (SC20F70U Series) • Push the accessory onto the end of the hose handle. • Pull out the dusting brush to use the crevice tool. • Push the accessory onto the end of the pipe. • Pull out the dusting brush to use the crevice tool. Accessory (Option) • Furniture brush for desk, Furniture and Floor. 16_ tools and maintenance filter tools and maintenance filter MAINTAIN FLOOR TOOLS 2-Step Brush 03 tools Carpet Cleaning Floor Cleaning and • Adjust the inlet lever according to the floor surface. • Remove waste matter completely if the inlet is blocked. Power Pet Plus Brush (Option) maintenance 1 2 3 filter For improved pickup of pet hair and fibre on carpets. 4 5 6 Frequent vacuuming of hair or pet fur may cause a falling-off of the rotation due to matters tangled around the drum. [. . . ] 1. Push the [Open Transparent Cover] button inward to remove the cover. 2. Use the crevice tool to remove impurities such as dust and hair from around the drum. 3. When done, push the [Open Transparent Cover] button outward to close the cover. tools and maintenance filter _19 CLEANING THE DUST SENSOR (OPTION) If the green light is not lit while cleaning • Check if the hose, extension pipe or the air inlet is clogged and clean it if necessary. • Empty the dust bin of the cleaner or clean the filters. If the red light does not light up when cleaning a dusty location • Clean the sensors (2EA) in the dust sensor block with a dry cloth. CAUTION Take care when you clean the sensors in the dust sensor block so that the sensors are not damaged. EMPTYING THE DUST BIN 1 2 3 Once dust reaches the dust full mark, empty the dust bin. Take the dust bin out by lifing the handle Push the button aside. 4 5 6 Click Throw the dust away in the bin. Close the dust bin cover. Before use, push the dust bin into the main body of the vacuum cleaner until you hear the “click” sound. 20_ tools and maintenance filter tools and maintenance filter CLEAN THE GRILLE 1 2 3 03 tools and Push the button aside. Turn the grille and take out it. Brush away the dust. maintenance 4 5 filter Insert the grille back into the dust bin and turn the grille. Close the dust bin cover. tools and maintenance filter _21 CLEAN THE DUST BIN WITH WATER 1 2 3 Push the button aside. Turn the grille and take out it. Push the button. 4 5 6 Separate the dust bin from body. Clean the dust bin and body with water. Leave the dust bin and body in the shade until completely dry. You may rinse the dust bin with cold water. 22_ tools and maintenance filter tools and maintenance filter CLEANING THE DUST FILTER When to clean the dust filter • If the dust filter is very dirty outside or clogged with fine dust, then clean it. If the light comes on after emptying the dust bin, cleaning the grill, please check the dust filter. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SAMSUNG SC20F70HB




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SAMSUNG SC20F70HB will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.