User manual SEKONIC L-508 CINE ZOOM MASTER

[. . . ] · Expanded Cine Speed Settings (Cine/Still mode)  page 4 The wide range of time settings from 1 f/s to 1, 000 f/s can meet from framing pictures to high speed filming as well as video applications. · Filter Compensation (Cine/Still mode)  page 4 You can select one of the 7 major filter combinations and obtain compensated readouts. · Measurement Lock (Cine/Still mode)  page 5 When Measurement Lock is activated, the last readings and f/s (frames per second) setting will be protected from accidental change. [. . . ] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 -ii- L-508 Cine BASIC OPERATION (Additional operation to L-508) 1. Cine mode and Still mode L-508Cine has Cine and Still modes which are selectable, . In Cine mode, Foot Candle/Lux/Foot Lambert readouts and Shutter Angle Setting are available in addition to the functions for still photography for ambient light. In Still mode, standard functions for still photography are available for ambient light and flash light. Slide the DIP switch #4 to "CINE ON" position. Cine mode - Incident mode When the Cine mode and Incident mode is selected, the following measuring modes will be available. To select each mode, turn the Set/change dial while holding down the MODE button. FC Foot Candle FC +T/F FC: Foot Candle T: Shutter speeds or Cine speeds (Frames per second) F: F/stop, dot on analog scale LUX Lux LUX + T/F Lux T: Shutter speeds or Cine speeds (Frames per second) F: F/stop, dot on analog scale -1- 1. Cine mode and Still mode T + F (Shutter speeds priority) T: Shutter speeds or Cine speeds (Frames per second) F: F/stop in digital and dot on analog scale EV + T/F EV T: Shutter speeds or Cine speeds (Frames per second) F: F/stop, dot on analog scale To display "EV+T/F" the DIP switch "F/No. / EV" should be on position. Cine mode - Shot reflected mode When the Cine mode and Spot reflected mode is selected, the following measuring modes will be available. To select each mode, turn the Set/change dial while hold down the MODE button. FL FL: Foot Lambert FL+T/F FL: Foot Lambert T: Shutter speeds or Cine speeds (Frames per second) F: F/stop, dot on analog scale T + F (Shutter speeds priority) T: Shutter speeds or Cine speeds (Frames per second) F: F/stop in digital and dot on analog scale EV + T/F EV T: Shutter speeds or Cine speeds (Frames per second) F: F/stop, dot on analog scale To display "EV+T/F" the DIP switch "F/No. / EV" should be on position. -2- L-508 Cine BASIC OPERATION (Additional operation to L-508) Still mode When the Still mode is selected, the same measuring modes available on L508 can be selected. To select each mode, turn the Set/change dial while hold down the MODE button. Please refer to the L-508 instructions "Setting Measuring Mode" for further instructions. Setting DIP switches (Cine/Still mode) Special features are selected with the DIP switches inside the battery compartment. You can customize the L-508Cine by activating desired functions. DIP switch assignment DIP switch Descriptions when the DIP switches are "ON" positions. Factory settings 1 TIME0. 5 Setting half shutter speed OFF 2 F No. /EV Selecting F/stop priority measurement and EV readout. You can select a shutter angle from 5° to 270° in 5° step. Filter Compensation (Cine/Still mode) Note: Shutter angle settings can be changed only when a cine speed is displayed. 4. [. . . ] Hold down the MODE button and ISO button and "Off" will appear to indicate that the Measurement lock is released. F/stop analog/digital range The ranges of the f/stops displayed: F/stop on the analog scale: f/0. 5 to f/45 in 1/2 step F/stop digital: f/0. 5 to f/90 in 1/10 step 8. Exposure Compensation (Cine/Still mode) L-508Cine is calibrated accurately to Sekonic standard and no further correction of the meter is required. [. . . ]