User manual SHARP AR 5726

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP AR 5726. We hope that this SHARP AR 5726 user guide will be useful to you.


SHARP AR 5726 : Download the complete user guide (14807 Ko)

You may also download the following manuals related to this product:

   SHARP AR-5726 (597 ko)
   SHARP AR-5726 (6421 ko)
   SHARP AR-5726 (6775 ko)
   SHARP AR-5726 (6683 ko)
   SHARP AR-5726 (4089 ko)
   SHARP AR-5726 (508 ko)
   SHARP AR-5726 (6775 ko)
   SHARP AR-5726 annexe 1 (513 ko)
   SHARP AR-5726 annexe 1 (486 ko)
   SHARP AR-5726 annexe 1 (707 ko)
   SHARP AR-5726 ANNEXE 1 (6697 ko)
   SHARP AR-5726 annexe 1 (489 ko)
   SHARP AR-5726 annexe 1 (778 ko)

Manual abstract: user guide SHARP AR 5726

Detailed instructions for use are in the User's Guide.

[. . . ] Be sure to replace these parts with specified ones for maintaining the safety and performance of the set. This document has been published to be used for after sales service only. 10 - 9 NOTE FOR SERVICING This Service Manual uses some photographs to assure safe operation. WARNING: If this WARNING should be ignored, a serious danger to life or a serious injury may result. [. . . ] 1 2 3 4 5 6 7 8 9 10 Item AE (Japan) AE (Ex Japan) Text Text/Photo Photo (Error diffusion) Photo (Dither) T/S AE (Japan) T/S AE (Ex Japan) T/S Text T/S Text/Photo Set value Default 0 0 1 1 1 1 0 0 1 1 Setting Gamma life correction setting Operation 0: Disable 1: Enable AR-5726/5731 SIMULATION 6 - 20 26-71 Purpose Function (Purpose) Setting In the power save time setting, the pre-heat (pre-heat mode setting) and the auto power shut off time can be set to the short time setup (pre-heat: 1 min, auto power shut off: 1 min) and the long time setup (pre-heat: 5min, auto power shut off: 30min). 30-2 Purpose Function (Purpose) Section Item Operation test/check Used to display the status of the sensors attached to the standard tray and the manual feed tray. Paper feed Operation Operation/procedure Select the short time setup or the long time setup of the pre-heat time and the auto power shut off time with the 10-key, and press the [START] key. Item 1 2 Content Preheat: 1min, auto power shut off: 1min Preheat: 5min, auto power shut off: 30min Default 1 Operation/procedure The active sensors and detectors are highlighted. PED1 LUD1 CD1 PED2 LUD2 CD2 PFD2 DSWR2 MPED MPLS1 MPLS2 MPLD1 MPLD2 1st tray paper empty sensor 1st tray paper upper limit detection sensor 1st tray empty sensor 2nd tray paper empty sensor 2nd tray paper upper limit detection sensor 2nd tray empty sensor 2nd tray paper pass sensor 2nd tray right door detection sensor Manual tray paper empty detection Manual tray length detection 1 Manual tray length detection 2 Manual feed paper length detection 1 Manual feed paper length detection 2 Note: When the sub code 71 is entered to display the setting menu, the default values are always displayed. ) 26-72 Purpose Function (Purpose) Setting The letterhead support is set. is selected, the set value of SIM 26-46 (Image output direction setting) is set to ?Setting Enable?Width detection size of the manual feed tray (one of them is displayed. ) A4/A3, LT/WLT, B5/B4, INV/LTR, A5/A4R, B5R, POSTCARD, EXTRA, 8K/16K (At detection, highlighted) Operation/procedure Input the set value with the 10-key and press the [START] key. Setting range 0-1 Default 0 40 40-1 Purpose Function (Purpose) Section Item Operation test/check Used to check the sensor of the machine manual feed tray. Paper feed Operation 30 30-1 Purpose Function (Purpose) Section Item Operation test/check Used to display the sensor status attached to the machine. Others Operation Operation/procedure The active sensors and detectors are highlighted. MPLS1 MPLS2 MPLD1 MPLD2 Manual tray length detection 1 Manual tray length detection 2 Manual feed paper length detection 1 Manual feed paper length detection 2 Operation/procedure The active sensors and detectors are highlighted. PPD1H PPD1L PPD2 POD1 DVCH DRST DSWR1 SFTHP POD2 TOPF DSWR0 LOEMP DUP2 POD3 PTOPF PS paper detection 1 sensor PS paper detection 2 sensor Fusing paper sensor 1st paper exit paper out sensor Developing cartridge detection sensor Drum intial detection sensor Interlock switch (side door) Shifter home position sensor 2nd paper exit paper out sensor 2nd paper exit full detection sensor 2nd paper exit cover open/close detection sensor 1st paper exit empty detection sensor Reverse path paper sensor Right paper exit sensor Right paper exit full sensor Width detection size of the manual feed tray (one of them is displayed. ) A4/A3, LT/WLT, B5/B4, INV/LTR, A5/A4R, B5R, POSTCARD, EXTRA, 8K/16K 40-2 Purpose Function (Purpose) Section Item Adjustment Used to adjust the manual paper feed tray paper width detector detection level. Paper feed Operation Operation/procedure The adjustment method is of the 4-point system. 3) Set to A5R/INVOICE R and fit the guide, then press the [START] key. AR-5726/5731 SIMULATION 6 - 21 6) Set the paper detection width (?), and press the [START] key. OFF 41-3 Purpose Function (Purpose) Section Item Operation test/check Used to check the light reception level and the detection level of the original size detection photo sensor. Others Operation Operation/procedure 40-3 Purpose Function (Purpose) Section Item Adjustment The AD conversion value of manual feed width detection is displayed. Paper feed Operation The detection output level of each sensor is displayed in real time. OCSW 1 to 5 Original cover state Open: Highlighted display Close: Normal display PD sensor detection level (Hexadecimal display) Operation/procedure The AD conversion value of manual feed width detection is displayed. [. . . ] MARK RANK DESCRIPTION Sensor cover 2nd cassette sensor PWB Upper limit detect actuator Paper detect actuator P-IN detect actuator Solenoid cover Paper feed solenoid Paper feed solenoid Solenoid arm Solenoid spring 2nd paper feed roller shaft Tray detect switch Cassette detect interface harness Bearing 6 Pick up roller pressure spring Pick up arm R Paper feed gear(20T) Spring pin(?2-8) Paper feed roller AND2 Pick up arm F Gear(16T) Pick up roller Door open/close detect harness Paper feed in detect actuator spring ????????Effective time 2 4 5 6 7 8 9 10 11 13 14 17 18 19 20 21 22 23 24 26 27 29 30 31 AD AP AD AD AC AD AR AR AD AC AH AF AD AC AC AD AD AA AR AD AB AM AD AC AG DJ EQ DJ DJ DJ DJ EQ EQ DJ DJ DX DS DJ DJ DJ DJ DJ DD EQ DJ DJ EG DJ DJ DX D E C C C D B B C C C B C C C C C C C C C A C C C 1 09/09 Cassette sensor PWB harness ?(2nd paper feed section) 8 a 14 2 17 28 2 4 10 5 11 31 30 6 7 9 13 a 19 27 14 26 22 29 24 23 PRP03926 20 21 18 ?MARK RANK DESCRIPTION Lock spring Paper guide lock Screw(38X) Transport paper guide 2nd door arm Transport paper guide shaft ?????????? [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP AR 5726




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP AR 5726 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.