User manual SIMA UDC-2

[. . . ] Safety and Maintenance DO NOT use charger inside a drawer, closed cabinet, on a carpet or cover with a cloth. The charger will become slightly warm in normal use, but if contained, heat may damage the charger and battery pack. [. . . ] Bldg #5 Oakmont, PA 15139 Exclusions: This Limited Warranty covers all defects in material and workmanship in the product, except damage resulting from accident, misuse, abuse, attempted repair by anyone other than the Company, neglect or from their normal and ordinary use of the product. The Company accepts no liabilities or obligations for consequential or incidental damage arising out of or in connection with the use or performance of the product. The Limited Warranty provides you with specific legal rights, you may have additional legal rights provided to you under the laws of your state or federal laws. ©2004 Sima Products Corporation 140 Pennsylvania Ave. Bldg #5 Oakmont, PA 15139 800-345-7462 Fax 412-828-9338 www. simacorp. com PN217001 Introduction Congratulations on buying the Sima UDC-2, a universal battery charger for use with digital camera batteries. Using the AC or DC adapters included, you can quickly and easily charge your Nicad, NiMH or lithium ion camcorder batteries at home or in the car. This package includes: UDC base unit, TrayA, Tray C & Tray 2, 120V AC adapter, 12V DC car adapter and this instruction manual. How to Connect 120V AC Power Supply Connect the AC adapter plug to To 120V AC outlet the Power Input jack on the rear of the UDC base. ( See Power Input jack diagram at right. ) The green Full indicator light will blink once. Mounting the Batteries To install the battery - Typically, you can install the battery onto the charger plate the same way you install the battery onto your camcorder. Align the contacts on your battery with the appropriate contacts on the charger. Realign the guides and try again. The UDC-2 will automatically detect the battery type and voltage from the tray. Features j Precision end-of-charge detection assures a full charge j "Top-off" function trickle charges to maintain a full charge. Technical Specs Input: Standby Current: Charge Current: Charge Termination: Size & Weight 12V DC 30mA 800mA @ constant current mode Fixed voltage Lithium (4. 2V for 3. 6V, 8. 4V for 7. 2V) NiCad/NiMH (delta V) 5. 25" x 2. 75" 3. 1 oz. How to Connect 12V DC Car Power Supply Connect the 12V DC car cord plug Power Input jack to the power input jack on the rear of the UDC base. [. . . ] When discharging is complete, the battery will automatically begin to recharge and the red Charge Status indicator will turn on (Fig. Depending on the amount of charge left in the battery, this may take several hours. [. . . ]