User manual SMC SMCWMR-AG

[. . . ] However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SMC. SMC reserves the right to change specifications at any time without notice. Trademarks SMC® is a registered trademark; and EZ-Stream, EZ Connect, Barricade and EZ Hub are trademarks of SMC Networks, Inc. [. . . ] To edit the tag information: · Open the MUSICMATCH Jukebox application · Highlight the song that is improperly tagged · Click [View/Edit Tags] in the "Music Center" on the left · If you selected a song from your playlist, click [Current Playlist], otherwise, click [My Library] · Enter the appropriate information · Press [OK] when complete 9 | Troubleshooting · The SMCWMR-AG EZ-Stream Universal Wireless Multimedia Receiver is not detecting the host PC o If you are using an Ethernet cable to plug the SMCWMR-AG into the network, verify that there is a link light on your network hub or switch. o If you are connecting the SMCWMR-AG with a wireless Access Point or Router, verify that the network settings are correct. By default the SSID is "SMC", encryption is disabled and the mode is Infrastructure on the SMCWMR-AG o Verify that the SMCWMR-AG has a wireless link. Go to the "Settings" menu, click "Device Management" and click "Link Quality". o If you have more than one network adapter in your host PC, verify that the MediaServer software is enabled to operate on the same network as the SMCWMR-AG. To do this, go to the "Network Connection" tab of the MediaServer. Make sure the correct address is shown in the "IP Address" column relative to your network adapter. (Note: If you are enabling the MediaServer on a different connection, you will be asked to restart it. o If you are using an A/V receiver, please make sure that your receiver is switched to the correct position corresponding to the location where you connected the media node's Audio L/R outputs. I have the SMCWMR-AG connected to the TV, but nothing appears on the screen. o Verify that the top LED on the front of the Wireless Multimedia Receiver is ON. o Verify that the video output cable from the SMCWMR-AG is connected properly to your A/V receiver. · · · · · I select Audio and any category beneath it, but I get a "No Content Available. . . " error message. o You may have shared folders on your host PC that do not contain any MP3 files. First verify and record the location of your MP3 files on your hard drive. o Open your MediaServer application, go to the "Shared Folders" tab and click [Add] to share the MP3s. I select Photo and any category beneath it, but I get a "No Content Available. . . " error message. o You may have shared folders on your host PC that do not contain any JPEG or BITMAP files. Remember, these files must have an extension of ". jpg", ". jpeg", or ". bmp". o Open your MediaServer application, go to the "Shared Folders" tab and click [Add] to share the files. I select Video, but I get a "No Content Available. . . " error message. o You may have shared folders on your host PC that do not contain any MPEG files. Remember, these files must have an extension of ". mpg" or ". mpeg". [. . . ] Network Address Translation can be used to give multiple users access to the Internet with a single user account, or to map the local address for an IP server (such as Web or FTP) to a public address. This secures your network from direct attack by hackers, and provides more flexible management by allowing you to change internal IP addresses without affecting outside access to your network. NAT must be enabled to provide multi-user access to the Internet or to use the Virtual Server function. NTSC is a color TV standard that broadcasts 30 interlaced frames per second at 525 lines of resolution. [. . . ]