User manual SMEG 1000N

[. . . ] 7 Glass Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Plastic scraper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 ARRANGING FOOD IN THE APPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If you don’t have a receptacle confirming with this, please have it done by a qualified electirician. • We do not take the responsibility of the damages that occur due to ungrounded usage. • Place your fridge in a place that it would not be exposed to direct sunlight. • Your appliance should be at least 50 cm away from stoves, ovens and heater cores, and should be at least 5 cm away from electrical ovens. • Fit the plastic wall spacers to the condenser at the back of the refrigerator in order to prevent cleaning to the wall for good performance. • When your fridge is placed next to a deep freezer, there should be at least 2 cm between them to prevent humidity on the outer surface. Do not place anything on your fridge, and install your fridge in a suitable place so that at least 15 cm is available on the upper side. • If you will place your fridge next to your kitchen cabinets, leave a space of 2 cm between them. • Install the distance adjustment plastic (the part with black vanes at the rear) by turning it 90° to prevent the condenser from touching the wall. • The adjustable front legs should stabilized in an appropriate height to allow your fridge operate in a stable and proper way. You can adjust the legs by turning them clockwise (or in the opposite direction). The switch will lit. • When the freezer compartment is cooled down to sufficient temperature, or the weather gets hot, turn the super switch off to save electrical consumption. ( ) • When you first switch on the appliance, for starting a suitable cooling, the appliance should work 24 hours continuously until it cools down to sufficient temperature. • In this time do not open the door so often and place a lot of food inside the appliance. If the unit is switched off or unplugged, you must allow at least 5 minutes before restarting or re-plugged the unit in order not to damage the compressor. Accessoires Making ice cubes (In some models) • Pull the lever toward you and take out the ice making tray • Fill the water in level of line. • Hold the left end of the lever and set the ice-tray on the icebox • When ice cubes are formed, twist the lever to drop off ice cubes into the ice box. Do not fill the icebox with water in order to make ice. It can be broken. EN - 6 - If turbo fan is available on your product ; Turbo fan • Do not block air inlet and outlet openings when storing food, otherwise air circulation that provided by turbo fan will be impaired. Glass Shelf There are details both on the body and on the glass shelfs for hanging the glass shelfs . You can replace glass shelfs in different varitions. Drawer Drawers on the crisper are optional in the product. You can remove the drawers and use the refrigerator without them. shelf grooves You have to push the drawers till stopers not to prevent air flow. stoppers Plastic scraper After a period of time, frost will build up in certain areas in the freezer compartment. The frost, accumulated in the freezer, should be removed periodically. • W hen buying frozen foods ensure that these have been frozen at suitable temperatures and that the packing is intact. • Frozen foods should be transported in appopriate containers to maintain the quality of the food and should be returned to the freezing surfaces of the unit in the shortest possible time. [. . . ] • Dry the inside of the unit carefully and set the thermostat knob to MAX position. EN - 10 - Replacing the light bulb To replace the bulb in freezer and fridge departments; 1- Unplug your fridge. 5- Wait for 5 minutes before re-plugging and bring the thermostat to its original position. PART - 5. SHIPMENT AND REPOSITIONING • Original package and foam may be kept for re-transportation (optionally). • You should fasten your fridge with thick package, bands or strong cords and follow the instructions for transportation on the package for re-transportation. • Remove movable parts (shelves, accessories, vegetable bins etc. ) or fix them into the fridge against shocks using bands during re-positioning and transportation. [. . . ]