User manual SMEG 4730

[. . . ] Do not remove the ventilation outlet “A” and the protective cover of the electrical connections “B”. [. . . ] Assemble the pump “E” provided, with the mounting bracket “F”, making sure that you close the tab “G” by pressing it with your hands. Then remove the caps on the ends of the solenoid valve (“H1” and “H2”). EN 4730 5. Connect the hose of the appliance “K” to the end “H2” of the pump and connect the tube supplied with the kit “L” to the end “H1” (see step 4). Feed the tube “L” provided (see step 7) though the grommet seal that is fastened onto the lower cover. When replacing the covers, make sure that the electric cables do not become trapped and/or pinched. 4730 Before carrying out a steam cooking function: This should only be done when using the new filling system for the first time and then each time the tank is filled. At this point, it is full and you can now turn off the appliance. 12. [. . . ] Insert the tube into the hole in the cap of the tank “P” and then place the filter “Q” provided, onto the end of the tube. [. . . ]