User manual SMEG ACIDGLC2 ISTRUZIONI VARIE

[. . . ] 2 2. 2 Label elements: Labelling according to Regulation CE n. 1272/2008 (CLP) Pictogram Signal word Warning Hazard statements H319 Causes serious eye irritation. Precautionary statements P280 Wear protective gloves/protective clothing/eye protection/face protection P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing P337+P313 If eye irritation persists get medical advice/attention. [. . . ] Keep away from strong oxidants, strong bases, metal nitrates and metals. Control parameters Components with exposure limits For citric acid has not been established, the date of preparation of this document, a threshold limit value for occupational exposure. Exposure controls Appropriate engineering controls Handle in accordance with good safety practice. Ensure good ventilation of the workplace by means of an effective local intake system Protective and hygiene measures Eye/face protection ACIDGLASS C2 - 3/7 - Date: 11/04/2016 SS EN Version: 5 SAFETY DATA SHEET (according to Annex II Reg. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. Protection for immersion and splash Full contact and splash contact: nitrile rubber gloves of a minimum thickness of 0. 11 mm Breakthrough time: equal to 480 minutes. If used in solution, or mixed with other substances, and under conditions other than those mentioned in EN 374, contact the supplier of CE approved gloves. This recommendation applies by way of advice and must be assessed by an industrial hygienist and a security officer aware of the specific situation. Respiratory protection If the risk assessment shows the need for air-purifying respirators, use a full face mask with combined filter type ABEK (EN 14387) as a backup to engineering. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved bodies standards such as NIOSH (US) and the CEN (EU). 9. [. . . ] Contaminated packaging Contaminated packaging has to be recovered or disposed of at an approved site according to the national regulations for waste management 14. Transport information The mixture is not classified as dangerous under current regulations in force relating to the transport of dangerous goods by road (ADR), Rail (RID), sea (IMDG Code), inland waters (ADN), and air (IATA). 14. 1 UN number: ADR-RID-ADN-IMDG-IATA: 14. 2 UN proper shipping name ADR-RID-ADN-IMDG-IATA: 14. 3 Transport hazard classes ADR-RID-ADN-IMDG-IATA: Not applicable Not applicable Not applicable ACIDGLASS C2 - 6/7 - Date: 11/04/2016 SS EN Version: 5 SAFETY DATA SHEET (according to Annex II Reg. UE 2015/830) 14. 4 Packaging group ADR-RID-ADN-IMDG-IATA: 14. 5 Environmental hazards Dangerous for the environment Marine pollutant 14. 6 Special precautions for user Not applicable 14. 7 Transport in bulk according to Annex II of MARPOL 73/78 and Code IBC Not applicable Not applicable Not applicable Not applicable 15. [. . . ]