User manual SMEG ALFA45UK

[. . . ] Contents 1. 1 1. 2 1. 3 1. 4 1. 5 1. 6 1. 7 2. 1 2. 2 2. 3 2. 4 General safety instructions Identification plate Manufacturer liability Appliance purpose Disposal This user manual How to read the user manual General Description Control panel Other parts Available accessories Instructions First use Using the oven Cooking modes Cooking advice Instructions Cleaning the surfaces Ordinary daily cleaning Food stains or residues Cleaning the door glazing Removing the internal glass pane Cleaning the inside of the oven Extraordinary maintenance If the appliance is not working properly 4 5 5 5 5 6 6 2 Description 7 7 7 8 8 3 Use 3. 1 3. 2 3. 3 3. 4 3. 5 4. 1 4. 2 4. 3 4. 4 4. 5 4. 6 4. 7 4. 8 4. 9 9 9 10 10 10 11 4 Cleaning and maintenance 12 12 12 12 12 12 12 13 14 15 5 Installation 5. 1 Electrical connection 5. 2 Positioning 16 16 17 We advise you to read this manual carefully, which contains all the instructions for maintaining the appliance’s aesthetic and functional qualities. For further information on the product: www. smegfoodservice. com 3 EN 1 Instructions 4 Instructions 1 Instructions 1. 1 General safety instructions Risk of personal injury • During use the appliance and its accessible parts become very hot. • Keep children under eight years of age at a safe distance if they are not constantly supervised. • This appliance may be used by children aged at least 8 and by people of reduced physical and mental capacity, or lacking in experience in the use of electrical appliances, provided that they are supervised or instructed by adults who are responsible for their safety. [. . . ] • If you wish to use greaseproof paper, place it so that it will not interfere with the hot air circulation inside the oven. • Do not place pans or trays directly on the bottom of the oven cavity. • Do not pour water directly onto very hot trays. 9 Use 3. 2 First use 1. Remove any protective film from the outside or inside of the appliance, including accessories. Remove any labels (apart from the technical data plate) from the accessories and from the oven cavity. Remove and wash all the appliance accessories (if fitted) (see 4 Cleaning and maintenance). Heat the empty oven at the maximum temperature to burn off any residues left by the manufacturing process. The maximum extent the doors of the multifunction ovens can be opened to is 110°. The swing door does not lock in the open position and may tend to swing close again. During use, pay attention not to come into contact with the internal glass pane to prevent burns. Over time the swing door might become more difficult to open and close. Grease the hinges. 3. 3 Using the oven The oven is designed for a maximum load of 3. 5 kg. Select the cooking time (up to 60’), or set manual cooking knob. using the timer 3. 4 Cooking modes Defrost The movement of air at room temperature causes frozen food to defrost quickly. This type of rapid defrost is ideal as the taste and appearance of the de-frozen food, whether previously deep-frozen or frozen in the freezer, remain unaltered. Normal cooking Using the fan and the circulaire heating element (incorporated in the rear of the oven) allows you to cook different foods on several levels. Cooking can only take place with the oven door closed: Opening the door deactivates the heating elements. Opening and closing the door The appliance is equipped with a swing door. In the event of a temporary power cut, pull the cord on the back of the appliance to manually open the door. To reclose it, push the door until you hear a mechanical “click”. 10 Use General advice • Use a fan assisted function to achieve consistent cooking at several levels. • It is not possible to shorten cooking times by increasing the temperature (the food could be overcooked on the outside and undercooked on the inside). Advice for cooking meat • Cooking times vary according to the thickness and quality of the food and to consumer taste. • Use a meat thermometer when roasting meat, or simply press on the roast with a spoon. [. . . ] • The tightening torque of the screws of the terminal supply wires must be 1. 5 - 2 Nm. The terminal indicated by symbol links up parts that are normally earthed. Connect the appliances appropriately using this terminal in order to make sure that they are equipotential. If the phase voltage drops below 190V~, the performance of the oven may suffer, not due to the product itself. General information Check the grid characteristics against the data indicated on the plate. [. . . ]