User manual SMEG GW4090BXC6 ISTRUZIONI VARIE

[. . . ] SMEG GW3060 - GW4090 - LABORATORY GLASSWARE WASHER - 1 INSTRUCTION SHEET THIS DOCUMENT Brief instruction sheet for basic procedures. [. . . ] Press “START” to start the selected program. RESET CYCLE “RESET” button: starts the RESET cycle to return the device to its initial status. The reset cycle should be used when alarms appear on the display. STOPPING THE PROGRAM Press “STOP” to halt a program. Depending from the program ad from the series of the product, not in all the situations the door cannot be opened. In these cases, two possibilities: - If the “START” button is pressed within 60 seconds: the cycle is restarted. [. . . ] There is no need to start a RESET cycle in the event of an alert such as “No salt” or “Lack of detergent”; respond as necessary to enable the device to function correctly. 2 LABORATORY PROGRAMS 11 Thermal disinfection 93°C – 10’ [ + Drying ] 12 Intensive thermal disinfection 93°C - 5’ [ + Drying ] 13 Intensive thermal disinfection 93°C – 10’ [ + Drying ] 14 Petroleum Dirt 93°C - 1’ [ + Drying ] 15 Petroleum Dirt, Intensive 93°C - 5’ [ + Drying ] 16 Petroleum Grease 93°C - 1’ [ + Drying ] 17 Mineral Oil 93°C – 10’ [ + Drying ] 18 Petrol 93°C - 5’ [ + Drying ] 19 Diesel 93°C - 1’ [ + Drying ] 20 Universal Petrol 93°C – 10’ [ + Drying ] 1 Prewash 2 Plastics 75°C - 3’ [ + Drying ] 3 Fast Glassware 75°C - 3’ [ + Drying ] 4 Medium Glassware 75°C - 5’ [ + Drying ] 5 Standard Glassware 80°C - 5’ [ + Drying ] 6 Intensive Glassware 90°C - 3’ [ + Drying ] 7 Glassware 93°C - 3’ [ + Drying ] 8 Agar Glassware 93°C - 3’ [ + Drying ] 9 Intensive Agar 93°C - 5’ [ + Drying ] 10 Thermal disinfection 93°C - 3’ [ + Drying ] [ + Drying ]: end-of-cycle drying phase, on models with Drying System only. Fogl. IT-EN GW3060-GW4090 Smeg S. p. A. [. . . ]