User manual SMEG LBB14PK

[. . . ] in the event of powering on after a power programme, see "Cancelling the programme" section. from incorrect usage or transportation. Children's safety Keep children away from the product when it intervening with the product. away from the reach of the children. 2 Installation neglect to have the grounding installation made when the product is used without grounding in accordance with the local regulations. securely fastened and remain undamaged. Refer to the nearest Authorised Service Agent for installation of the product. [. . . ] Do not use amounts exceeding the dosage quantities recommended on the detergent package to avoid problems of excessive foam, poor rinsing, financial savings and finally, environmental protection. Using softeners Pour the softener into the softener compartment of the detergent drawer. Do not exceed the (>max<) level marking in the softener compartment. If the softener has lost its fluidity, dilute it with water before putting it in the detergent drawer. Using liquid detergents If the product contains a liquid detergent cup: Make sure that you have placed the liquid detergent cup in compartment nr. Use the detergent manufacturer's measuring cup and follow the instructions on the package. If the liquid detergent has lost its fluidity, dilute it with water before putting in the detergent cup. If the product does not contain a liquid detergent cup: Do not use liquid detergent for the prewash in a programme with prewash. Use the detergent manufacturer's measuring cup and follow the instructions on the package. Liquid detergent stains your clothes when used with Delayed Start function. If you are going to use the Delayed Start function, do not use liquid detergent. detergents, read the manufacturer's instructions on the detergent package carefully and follow the dosage values. As their meshed texture causes little amount of detergent into the main wash compartment. See "Auxiliary function selection" section for explanations of these options. ” C EN Programme and consumption table EN Water Consumption(I) Max Quick Wash*** Energy Consumption(kWh) Auxiliary functions Temperature Max. Load(kg) Quick Wash Extra Rinse Rinse Hold Program (°C) Anti-Creasing Prewash Selectable temperature range 90-Cold 90-Cold 90-Cold 60-Cold 0. 97 60-Cold 60-Cold 60-40 90-30 60-Cold 60-Cold 40 40-Cold 40-Cold 60-Cold 90-Cold 90-Cold 90-Cold 40-Cold 40-Cold Hand wash Freshen up 20 - 1 35 0. 20 1200 20 - • : Selectable * : Automatically selected, no canceling. ** : Energy Label programme (EN 60456 Ed. 3) *** : If maximum spin speed of the machine is lower then this value, you can only select up to the maximum spin speed. ** “Cotton eco 40°C and Cotton eco 60°C are standard cycles. ” These cycles are known as ‘40°C cotton standard cycle’ and ‘60°C cotton standard cycle’ and indicated with the symbols on the panel. The auxiliary functions in the table may vary according to the model of your machine. Water and power consumption may vary subject to the changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in electric voltage. You can see the washing time of the programme you have selected on the display of the machine. It is normal that small differences may occur between the time shown on the display and the real washing time. 12 EN Auxiliary function selection the programme. Furthermore, you may also select from getting wrinkled when there is no water in the this process if you want to drain the water without spinning your laundry. [. . . ] Remove the nuts of the water intake hoses to access the filters on the water intake valves. Clean them with an appropriate filters on the flat ends of the water intake hoses together with the gaskets and clean thoroughly under running water. Replace the gaskets and filters carefully in their places and tighten the hose 5 Maintenance and cleaning intervals. Draining remaining water and cleaning the pump filter The filter system in your machine prevents solid clogging the pump impeller during discharge of pump will extend. Cleaning the detergent drawer Clean the detergent drawer at regular intervals in order to prevent accumulation of powder detergent in time. drained off first to clean the pump filter. Press the dotted point on the siphon in the softener compartment and pull towards you until the compartment is removed from the machine. A damage your machine or may cause noise C water: softener mixture starts to gather in the cleaned. [. . . ]