User manual SMEG SAP3700X

[. . . ] • Never try to put out a fire or flames with water: turn off the appliance and smother the flames with a fire blanket or other appropriate cover. • Have qualified personnel carry out installation and assistance interventions according to the standards in force. • Do not insert pointed metal objects (cutlery or utensils) into the slots in the appliance. • Do not try to repair the appliance yourself or without the intervention of a qualified technician. • If the power supply cable is damaged, contact technical support immediately and they will replace it. [. . . ] While the function is in progress, it is possible to further modify the defrosting duration. Turn the control knob to the right or left to make the required changes. In any event, the defrosting will automatically resume 5 seconds from the last modification. At the end of the cooking time “function ended” appears on the display and a buzzer will sound that can be deactivated by pressing the control knob. It will then proceed with the selected function. Proving For successful proving, a container of water should be placed in the bottom of the oven. Turn the control knob to the right or left to select proving from the “special functions” menu. While the function is in progress, it is possible to set a timer for a maximum of 4 hours (see “Timer during function”), a proving duration (see “Timed cooking”) or a delayed proving (see “Delayed cooking”). Press the control knob to make the required changes. 22 Use Unless otherwise set, the proving will have a maximum duration of 13 hours. The light inside the oven will remain off during the proving function. At the end of the cooking time “function ended” appears on the display and a buzzer will sound that can be deactivated by pressing the control knob. Turn the control knob to the right or left to select food warming from the “special functions” menu. A message will indicate when to place the food in the oven and enable the start of cooking. 8. When the preset program has finished, the appliance will warn the user with buzzers and the flashing symbol. Inside the selected preset program, turn the control knob to the left or right to select change from the menu of the selected dish. Press the control knob to perform cooking with the same parameters currently set (press the knob twice if the buzzer is active). The appliance will automatically restart cooking if it is at the correct temperature; otherwise it will also resume preheating. Cooking in sequence is useful to cook multiple dishes of the same type. It is not recommended to place the dish in the oven during the automatic pre-heat stage. Turn the control knob to the right or left to select the function to associate with the preset program. Turn the control knob to the right or left to select the weight to associate with the preset program. Press the control knob to confirm. 27 EN IT Ending a preset program Changing a preset program permanently Use 4. Turn the control knob to the right or left to select the duration to associate with the preset program. [. . . ] • Check whether an omnipolar switch upstream of the appliance supply line is in the “ON” position. The appliance does not heat up: • Check whether it has been set in “demo” mode (for further details see “Settings”). The controls do not respond: • Check whether it has been set to “control lock” mode (for further details see “Settings”). The cooking times are longer than those indicated in the table: • Check whether it has been set to “ecologic” mode (for further details see “Settings”). [. . . ]